View
244
Download
4
Category
Preview:
Citation preview
Células de cargaLoad cells
Dinacell electrónica, s.l.Pol. Ind. Santa Ana - C/ El Torno, 8 - 28529 Rivas Vaciamadrid (Madrid) - Tel. 913 001 435 - Fax: 913 001 645
E-mail: dinacell@dinacell.com - http://www.dinacell.com
Desde 1994 Dinacell Electrónica hadesarrollado proyectos en el ámbito de lascélulas de carga con aplicaciones en diversossectores industriales, como grúas,automoción, pesaje industrial, silos yascensores. El concepto de nuestro trabajoabarca el proceso completo de un sistemapesacargas, que incluye el diseño yfabricación de las células y de los equiposelectrónicos, tales como displays y unidadesde control.
La empresa, sita en Madrid (España), tieneactualmente una distribución internacionalpara ofrecer sus productos de alta calidad aprecios muy competitivos y con un servicioespecial al cliente en numerosos países.
En la actualidad, Dinacell cuenta con unaplantilla cualificada y competente quecontribuye con su gran experiencia, más de20 años, al continuo desarrollo y mejora dela compañía para alcanzar el máximo nivel,trabajando duro día a día.
Durante estos años, la compañía se haganado la confianza de sus clientes, graciasa la calidad de sus productos y a un serviciopostventa rápido y eficaz.
Esta calidad está avalada por la selecciónexclusiva de materiales y a los profesionalesque conforman nuestra plantilla, así comopor la implantación de nuevas tecnologías enla línea de producción.
Since 1994 Dinacell Electrónica hasdeveloped several projects in the field of the
load cells with applications in differentindustrial sectors, such as cranes, automotive
industry, industrial weighing andhandling,silos and elevators. The concept of our work
involves the whole process of a load weighingsystem, including the design and
manufacturing of the load cells as well as theelectronic devices such as displays and
controllers.
The company, located in Madrid (Spain), hasin present day a world-wide distribution
offering its high quality products with verycompetitive prices and a special customersservice to several countries all around the
world.
Dinacell counts on qualified and competentpeople who contribute with their large
experience, around 20 years, to the continueimprovement and development of the
company to raise it to the top, working hardday by day.
During these years the company has won itsclients confidence by the good quality of theproducts and an effective post sales service
where our customers are always friendlyattended.
This quality is guaanteed by the exclusiveselection of the materials and the
professionalism of our staff, as well as theintroduction of new technologies in the
production line.
1
CÉLULAS DE CARGA / LOAD CELL
ÍNDICE / INDEX
Producto / Product Página / Page
CF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
CFA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
CT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
CTR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
CTC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
CTCM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
CTDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
TLCX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
BULÓN / LOAD PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
LM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
LMPK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
LMGK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
LMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
INS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
SD1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
SKP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
SKM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
SKG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
BP2093 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
PAR 500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
PAR 750 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
CFD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
2
CÉLULAS DE CARGA
ESPECIFICACIONES TÉCNICAS
Sensibilidad 2mV/V
Ajuste tolerancia sensibilidad 0.1%
Ajuste tolerancia de cero 1% F.E.
Tensión de excitación ≤ 12V
No linealidad <0.015% F.E.
No repetibilidad <0.011% F.E.
Error combinado <0.027% F.E.
Histéresis <0.009% F.E.
Fluencia en 30 minutos <0.025% F.E.
Efecto temp. en sensibilidad <0.023% F.E
Efecto temp. en cero <0.016%/5ºC
Margen compensado de temperatura -10ºC/+40ºC
Resistencia de entrada 380Ω±10ΩResistencia de salida 350Ω±3ΩResistencia de aislamiento (V.Test=100V) >5000 106ΩMáxima carga de trabajo 150% F.E.
Límite de carga sin perder características 200% F.E.
Carga de rotura >300% F.E.
Cable (longitud de 4 metros) Flexible 4x0.25mm
Protección IP 66
Células diseñadas para trabajar envoladizo con elemento sensor aflexión o cortadura, segúncapacidades.
Estas células van equipadas concasquillos aislantes de altaresistencia mecánica.
Se fabrican en acero aleado contratamiento anticorrosión de níquelquímico o acero inoxidable.
Casquillo aislante
CAPACIDADES
10, 15, 20, 30, 50 75, 100,150, 200, 250, 300, 500,
750, 1000, 1200 y 1500 kg
CF
3
LOAD CELL
TECHNICAL CHARACTERISTICS
Sensibility 2mV/V
Tolerance adjust sensibility 0.1%
Tolerance adjust on zero 1% F.S.
Tension of excitation ≤ 12V
Non Linearity <0.015% F.S.
Non Repeatibility <0.011% F.S.
Combined error <0.027% F.S.
Hysteresis <0.009% F.S.
Creep in 30 minutes <0.025% F.S.
Temp. effect on sensibility <0.023% F.S.
Temp. effect on zero <0.016%/5ºC
Compensated margin of temperature -10ºC/+40ºC
Input resistance 380Ω±10ΩOutput resistance 350Ω±3ΩInsulation resistance (V.Test=100V) >5000 106ΩMaximum work load 150% F.S.
Load limit without loss of characteristics 200% F.S.
Break load >300% F.S.
Cable length 4 m Flexible 4x0.25mm
Protection IP 66
Load cells specially designed to workin jutting out with shear or flexionsensor element, depending oncapacities.
Equipped with insulating cases ofhigh mechanical resistance.
Manufactured in alloy steel orstainless steel. Anti-corrosiontreatment of chemical nickel (Alloysteel).
Insulating case
CAPACITIES
10, 15, 20, 30, 50 75, 100,150, 200, 250, 300, 500,
750, 1000, 1200 and 1500 kg
CF
4
CÉLULAS DE CARGA
ESPECIFICACIONES TÉCNICAS
Sensibilidad 2mV/V
Ajuste tolerancia sensibilidad 0.1%
Ajuste tolerancia de cero 1% F.E.
Tensión de excitación ≤ 12V
No linealidad <0.015% F.E.
No repetibilidad <0.011% F.E.
Error combinado <0.027% F.E.
Histéresis <0.009% F.E.
Fluencia en 30 minutos <0.025% F.E.
Efecto temp. en sensibilidad <0.023% F.E.
Efecto temp. en cero <0.016%/5ºC
Margen compensado de temperatura -10ºC/+40ºC
Resistencia de entrada 380Ω±10Ω
Resistencia de salida 350Ω±3Ω
Resistencia de aislamiento (V.Test=100V) >5000 106Ω
Máxima carga de trabajo 150% F.E.
Límite de carga sin perder características 200% F.E.
Carga de rotura >300% F.E.
Cable (longitud de 4 metros) Flexible 4x0.25mm
Protección IP 66
Células diseñadas paratrabajar en voladizo conelemento sensor a flexión ocortadura, según capacidades.
Estas células van equipadascon casquillos aislantes de altaresistencia mecánica.
Se fabrican en acero aleadocon tratamiento anticorrosiónde níquel químico o aceroinoxidable.
CAPACIDADES
1000, 2000, 3000 y 5000 kg
CFA
5
LOAD CELL
Load cells specially designedto work in jutting out, with flexion or shear sensorelement, according tocapacities.
Equipped with insulatingcases of high mechanicalresistance.
Manufactured in alloy steelor stainless steel. Anti-corrosion treatment ofchemical nickel (Alloy steel).
CAPACITIES
1000, 2000, 3000 and 5000 kg
CFA
TECHNICAL CHARACTERISTICS
Sensibility 2mV/V
Tolerance adjust sensibility 0.1%
Tolerance adjust on zero 1% F.S.
Tension of excitation ≤ 12V
Non Linearity <0.015% F.S.
Non Repeatibility <0.011% F.S.
Combined error <0.027% F.S.
Hysteresis <0.009% F.S.
Creep in 30 minutes <0.025% F.S.
Temp. effect on sensibility <0.023% F.S.
Temp. effect on zero <0.016%/5ºC
Compensated margin of temperature -10ºC/+40ºC
Input resistance 380Ω±10Ω
Output resistance 350Ω±3Ω
Insulation resistance (V.Test=100V) >5000 106Ω
Maximum work load 150% F.S.
Load limit without loss of characteristics 200% F.S.
Break load >300% F.S.
Cable length 4 m Flexible 4x0.25mm
Protection IP 66
6
CÉLULAS DE CARGA
ESPECIFICACIONES TÉCNICAS
Sensibilidad 2mV/V
Ajuste tolerancia sensibilidad 0.1%
Ajuste tolerancia de cero 1% F.E.
Tensión de excitación ≤ 12V
No linealidad <0.015% F.E.
No repetibilidad <0.011% F.E.
Error combinado <0.027% F.E.
Histéresis <0.009% F.E.
Fluencia en 30 minutos <0.025% F.E.
Efecto temp. en sensibilidad <0.023% F.E.
Efecto temp. en cero <0.016%/5ºC
Margen compensado de temperatura -10ºC/+40ºC
Resistencia de entrada 380Ω±10ΩResistencia de salida 350Ω±3ΩResistencia de aislamiento (V.Test=100V) >5000 106ΩMáxima carga de trabajo 150% F.E.
Límite de carga sin perder características 200% F.E.
Carga de rotura >300% F.E.
Cable Flexible 4x0.25mm
Protección IP 66
CAPACIDADES
750, 1000, 1500, 2000, 3000, 5000, 7500 y 10000 kg
CT
Células especialmente diseñadas para trabajar atracción, con elemento sensor a cortadura.
Utilización con grilletes.
Esta célula va equipada con casquillos aislantes de altaresistencia mecánica (750–5000 Kg).
Se fabrica en acero aleado.
Tratamiento anticorrosión de níquel químico.
Capacidades A B C D E F ØG Longituden kg mm cable
en m
7501000 50 110 26 24 75 17 19 41500
20003000
60 140 32 30 90 20.5 25 4
5000 70 180 38 34 120 26 30 4
750010000
100 220 - 48 130 - 45 5
7
LOAD CELL
TECHNICAL CHARACTERISTICS
Sensibility 2mV/V
Tolerance adjust sensibility 0.1%
Tolerance adjust on zero 1% F.S.
Tension of excitation ≤ 12V
Non Linearity <0.015% F.S.
Non Repeatibility <0.011% F.S.
Combined error <0.027% F.S.
Hysteresis <0.009% F.S.
Creep in 30 minutes <0.025% F.S.
Temp. effect on sensibility <0.023% F.S.
Temp. effect on zero <0.016%/5ºC
Compensated margin of temperature -10ºC/+40ºC
Input resistance 380Ω±10ΩOutput resistance 350Ω±3ΩInsulation resistance (V.Test=100V) >5000 106ΩMaximum work load 150% F.S.
Load limit without loss of characteristics 200% F.S.
Break load >300% F.S.
Cable Flexible 4x0.25mm
Protection IP 66
Load cells specially designed to work in traction, withshear sensor element.
Used with shackles.
Equipped with insulating cases of high mechanicalresistance (750-5000 kg).
Manufactured in alloy steel.
Anti-corrosion treatment of chemical nickel.
CAPACITIES
750, 1000, 1500, 2000, 3000, 5000, 7500 and 10000 kg
CT
Capacities A B C D E F ØG Cablein kg in mm length
in m
7501000 50 110 26 24 75 17 19 41500
20003000
60 140 32 30 90 20.5 25 4
5000 70 180 38 34 120 26 30 4
750010000
100 220 - 48 130 - 45 5
8
CÉLULAS DE CARGA
ESPECIFICACIONES TÉCNICAS
Sensibilidad 2mV/V
Ajuste tolerancia sensibilidad 0.1%
Ajuste tolerancia de cero 1% F.E.
Tensión de excitación ≤ 12V
No linealidad <0.015% F.E.
No repetibilidad <0.011% F.E.
Error combinado <0.027% F.E.
Histéresis <0.009% F.E.
Fluencia en 30 minutos <0.025% F.E.
Efecto temp. en sensibilidad <0.023% F.E.
Efecto temp. en cero <0.016%/5ºC
Margen compensado de temperatura -10ºC/+40ºC
Resistencia de entrada 380Ω±10Ω
Resistencia de salida 350Ω±3Ω
Resistencia de aislamiento (V.Test=100V) >5000 106Ω
Máxima carga de trabajo 150% F.E.
Límite de carga sin perder características 200% F.E.
Carga de rotura >300% F.E.
Cable Flexible 4x0.25mm
Protección IP 66
Células diseñadas para trabajar atracción, con elemento sensor acortadura.
Utilización con grilletes.
Equipada con casquillos aislantesde alta resistencia mecánica(750–5000 kg).
Fabricada en acero aleado.
Tratamiento anticorrosión de níquelquímico.
Capacidades A B C D ØE ØF G K L M N Oen kg
100/300/500 50 104 19 70 12 16 46 148 M12 44 59 12
750/1000/1500 52 114 24 75 16 20 48 163 M16 50 66 17
2000/3000 65 144 30 90 20 25 58 212 M22 71 92 26
5000 75 184 34 120 25 30 68 264 M24 80 103 31
CAPACIDADES
100, 300, 500, 750, 1000,1500, 2000, 3000 y 5000 kg
CTR
9
LOAD CELL
Capacities A B C D ØE ØF G K L M N Oin kg
100/300/500 50 104 19 70 12 16 46 148 M12 44 59 12
750/1000/1500 52 114 24 75 16 20 48 163 M16 50 66 17
2000/3000 65 144 30 90 20 25 58 212 M22 71 92 26
5000 75 184 34 120 25 30 68 264 M24 80 103 31
TECHNICAL CHARACTERISTICS
Sensibility 2mV/V
Tolerance adjust sensibility 0.1%
Tolerance adjust on zero 1% F.S.
Tension of excitation ≤ 12V
Non Linearity <0.015% F.S.
Non Repeatibility <0.011% F.S.
Combined error <0.027% F.S.
Hysteresis <0.009% F.S.
Creep in 30 minutes <0.025% F.S.
Temp. effect on sensibility <0.023% F.S.
Temp. effect on zero <0.016%/5ºC
Compensated margin of temperature -10ºC/+40ºC
Input resistance 380Ω±10Ω
Output resistance 350Ω±3Ω
Insulation resistance (V.Test=100V) >5000 106Ω
Maximum work load 150% F.S.
Load limit without loss of characteristics 200% F.S.
Break load >300% F.S.
Cable Flexible 4x0.25mm
Protection IP 66
CAPACITIES
100, 300, 500, 750, 1000,1500, 2000, 3000 and 5000 kg
CTR
Load cells specially designed towork in traction, with shearsensor element.
Used with shackles.
Equipped with insulating cases ofhigh mechanical resistance (750-5000 kg).
Manufactured in alloy steel.
Anti-corrosion treatment ofchemical nickel.
10
CÉLULAS DE CARGA
ESPECIFICACIONES TÉCNICAS
Sensibilidad 2mV/V
Ajuste tolerancia sensibilidad 0.1%
Ajuste tolerancia de cero 1% F.E.
Tensión de excitación ≤ 12V
No linealidad <0.015% F.E.
No repetibilidad <0.011% F.E.
Error combinado <0.027% F.E.
Histéresis <0.009% F.E.
Fluencia en 30 minutos <0.025% F.E.
Efecto temp. en sensibilidad <0.023% F.E.
Efecto temp. en cero <0.016%/5ºC
Margen compensado de temperatura -10ºC/+40ºC
Resistencia de entrada 380Ω±10Ω
Resistencia de salida 350Ω±3Ω
Resistencia de aislamiento (V.Test=100V) >5000 106Ω
Máxima carga de trabajo 150% F.E.
Límite de carga sin perder características 200% F.E.
Carga de rotura >300% F.E.
Cable (longitud de 4 metros) Flexible 4x0.25mm
Protección IP 66
Células especialmente diseñadas para trabajara tracción o compresión.
Se fabrican en acero aleado con tratamientoanticorrosión de níquel químico o aceroinoxidable, según necesidades.
CAPACIDADES
250, 300, 500, 750, 1000, 1500,2000, 2500, 3000, 5000, 10000 y
15000 kg
CTC
Capacidades A B C D Een kg en mm
250/300/500 70 70 80 25 2xM12
750/1000/15002000/2500
80 80 90 25 2xM16
3000/5000 94 89 96 42 2xM22
10000/15000 75 108 46 2xM24
11
LOAD CELL
TECHNICAL CHARACTERISTICS
Sensibility 2mV/V
Tolerance adjust sensibility 0.1%
Tolerance adjust on zero 1% F.S.
Tension of excitation ≤ 12V
Non Linearity <0.015% F.S.
Non Repeatibility <0.011% F.S.
Combined error <0.027% F.S.
Hysteresis <0.009% F.S.
Creep in 30 minutes <0.025% F.S.
Temp. effect on sensibility <0.023% F.S.
Temp. effect on zero <0.016%/5ºC
Compensated margin of temperature -10ºC/+40ºC
Input resistance 380Ω±10Ω
Output resistance 350Ω±3Ω
Insulation resistance (V.Test=100V) >5000 106Ω
Maximum work load 150% F.S.
Load limit without lost of characteristics 200% F.S.
Break load >300% F.S.
Cable length 4 m Flexible 4x0.25mm
Protection IP 66
Load cells specially designed to work ontraction and compression, with shear sensorelement.
Manufactured in alloy steel and stainlesssteel.
Anti-corrosion treatment of chemical nickel.
CAPACITIES
250, 300, 500, 750, 1000, 1500,2000, 2500, 3000, 5000, 10000
and 15000 kg
CTC
Capacities A B C D Ein kg In mm
250/300/500 70 70 80 25 2xM12
750/1000/15002000/2500
80 80 90 25 2xM16
3000/5000 94 89 96 42 2xM22
10000/15000 75 108 46 2xM24
12
CÉLULAS DE CARGA
ESPECIFICACIONES TÉCNICAS
Sensibilidad 2mV/V
Ajuste tolerancia sensibilidad 0.1%
Ajuste tolerancia de cero 1% F.E.
Tensión de excitación ≤ 12V
No linealidad <0.015% F.E.
No repetibilidad <0.011% F.E.
Error combinado <0.027% F.E.
Histéresis <0.009% F.E.
Fluencia en 30 minutos <0.025% F.E.
Efecto temp. en sensibilidad <0.023% F.E.
Efecto temp. en cero <0.016%/5ºC
Margen compensado de temperatura -10ºC/+40ºC
Resistencia de entrada 380Ω±10Ω
Resistencia de salida 350Ω±3Ω
Resistencia de aislamiento (V.Test=100V) >5000 106Ω
Máxima carga de trabajo 150% F.E.
Límite de carga sin perder características 200% F.E.
Carga de rotura >300% F.E.
Cable (longitud de 4 metros) Flexible 4x0.25mm
Protección IP 66
Células especialmente diseñadas paratrabajar a tracción o compresión.
Se fabrican en acero aleado contratamiento anticorrosión de níquel químicoo acero inoxidable, según necesidades.
También se pueden fabrican en aluminiosegún las capacidades.
CAPACIDADES
100, 150, 200, 250, 300, 500, 600,700, 750 y 800 kg
CTCM
13
LOAD CELL
TECHNICAL CHARACTERISTICS
Sensibility 2mV/V
Tolerance adjust sensibility 0.1%
Tolerance adjust on zero 1% F.S.
Tension of excitation ≤ 12V
Non Linearity <0.015% F.S.
Non Repeatibility <0.011% F.S.
Combined error <0.027% F.S.
Hysteresis <0.009% F.S.
Creep in 30 minutes <0.025% F.S.
Temp. effect on sensibility <0.023% F.S.
Temp. effect on zero <0.016%/5ºC
Compensated margin of temperature -10ºC/+40ºC
Input resistance 380Ω±10Ω
Output resistance 350Ω±3Ω
Insulation resistance (V.Test=100V) >5000 106Ω
Maximum work load 150% F.S.
Load limit without loss of characteristics 200% F.S.
Break load >300% F.S.
Cable length 4 m Flexible 4x0.25mm
Protection IP 66
Load cells specially designed to work intraction and compression, with shear sensorelement.
Manufactured in alloy steel or aluminium,depending on the capacities of the load cells.
Manufactured in stainless steel depending onthe applications or necessities. Anti-corrosiontreatment of chemical nickel (Alloy steel).
CTCMCAPACITIES
100, 150, 200, 250, 300, 500, 600,700, 750 and 800 kg
14
CÉLULAS DE CARGA
ESPECIFICACIONES TÉCNICAS
Sensibilidad 2mV/V
Ajuste tolerancia sensibilidad 0.1%
Ajuste tolerancia de cero <1% F.E.
Tensión de excitación ≤ 24V
No linealidad <0.015% F.E.
No repetibilidad <0.012% F.E.
Error combinado <0.029% F.E.
Histéresis <0.012% F.E.
Fluencia en 30 minutos <0.025% F.E.
Efecto temp. en sensibilidad <0.023% F.E.
Efecto temp. en cero <0.016%/5ºC
Margen compensado de temperatura -10ºC/+40ºC
Resistencia de entrada 700Ω±3Ω
Resistencia de salida 700Ω±3Ω
Resistencia de aislamiento (V.Test=100V) >5000 106Ω
Máxima carga de trabajo 150% F.E.
Límite de carga sin perder características 200% F.E.
Carga de rotura >300% F.E.
Cable (longitud de 8 metros) Flexible 6x0.25mm
Protección IP 65
CAPACIDADES
12, 15, 20, 25, 35 y 50 TnCTDC
Capacidades A B C D ØE
15 a 20 Tn 125 250 68 155 52
25 a 30 Tn 125 290 78 175 58
35 a 50 Tn 150 330 90 195 72
Células especialmente diseñadas para trabajar atracción.
Utilización con grilletes.
Célula de doble cortadura para mayor resistenciaa la rotura.
Se fabrica en acero aleado.
Tratamiento anticorrosión de níquel químico.
15
LOAD CELL
TECHNICAL CHARACTERISTICS
Sensibility 2mV/V
Tolerance adjust sensibility 0.1%
Tolerance adjust on zero <1% F.S.
Tension of excitation ≤ 24V
Non Linearity <0.015% F.S.
Non Repeatibility <0.012% F.S.
Combined error <0.029% F.S.
Hysteresis <0.012% F.S.
Creep in 30 minutes <0.025% F.S.
Temp. effect on sensibility <0.023% F.S.
Temp. effect on zero <0.016%/5ºC
Compensated margin of temperature -10ºC/+40ºC
Input resistance 700Ω±3Ω
Output resistance 700Ω±3Ω
Insulation resistance (V.Test=100V) >5000 106Ω
Maximum work load 150% F.S.
Load limit without loss of characteristics 200% F.S.
Break load >300% F.S.
Cable length 8 m Flexible 6x0.25mm
Protection IP 65
Load cells specially designed to work intraction.
Used with shackles.
Double shear load cell for higher resistanceto the breakage.
Manufactured in alloy steel.
Anti-corrosion treatment of chemical nickel.
CAPACITIES
12, 15, 20, 25, 35 and 50 TnCTDC
Capacities A B C D ØE
15 a 20 Tn 125 250 68 155 52
25 a 30 Tn 125 290 78 175 58
35 a 50 Tn 150 330 90 195 72
16
CÉLULAS DE CARGA
ESPECIFICACIONES TÉCNICAS
Sensibilidad Aprox. 1.5mV/V
Ajuste tolerancia sensibilidad 5%
Ajuste tolerancia de cero 2% F.E.
Alimentación De 10 a 30 Vdc
No linealidad <0.034% F.E.
No repetibilidad <0.034% F.E.
Error combinado <0.07% F.E.
Histéresis <0.07% F.E.
Fluencia en 30 minutos <0.037% F.E.
Efecto temp. en sensibilidad <0.034% F.E.
Efecto temperatura en cero <0.024%/5ºC
Margen compensado de temperatura -10ºC/+40ºC
Resistencia de entrada 350Ω±3Ω
Resistencia de salida 350Ω±1.5Ω
Resistencia de aislamiento (V.Test=100V) >5000 MΩ
Máxima carga de trabajo 150% F.E.
Límite de carga sin perder características 200% F.E.
Carga de rotura >300% F.E.
Cable (Opcional con conector M12) Flexible ø6 6x0.22mm
Protección IP 66
Célula de carga especialmentediseñada para trabajar a tracción.
Fabricada en acero aleado o aceroinoxidable.
Tratamiento anticorrosión porníquel químico.
Fabricación a medida.
Estas células pueden suministrarsecon rótulas para los alojamientosde los ejes (opcional).
CAPACIDADES
De 1000 a 60000 kgTLCX
Salida del cable
Excitación + . . . . RojoExcitación - . . . . . NegroSeñal + . . . . . . . . VerdeSeñal - . . . . . . . . . Blanco
Conector M12
Conexión
Mediante salida de cable o con conector panelado M12.
Salidas opcionales: mV, mA, V.
17
LOAD CELL
TECHNICAL CHARACTERISTICS
Sensibility Aprox. 1.5mV/V
Tolerance adjust sensibility 5%
Tolerance adjust on zero 2% F.S.
Excitation Voltage From 10 to 30 Vdc
Non Linearity <0.034% F.S.
Non Repeatibility <0.034% F.S.
Combined error <0.07% F.S.
Hysteresis <0.07% F.S.
Creep in 30 minutes <0.037% F.S.
Temp. effect on sensibility <0.034% F.S.
Temperature effect on zero <0.024%/5ºC
Compensated margin of temperature -10ºC/+40ºC
Input resistance 350Ω±3Ω
Output resistance 350Ω±1.5Ω
Insulation resistance (V.Test=100V) >5000 MΩ
Maximum work load 150% F.S.
Load limit without loss of characteristics 200% F.S.
Break load >300% F.S.
Cable (4 meters) Flexible ø6 4x0.22mm
Protection IP 66
Load cell specially designed towork in traction.
Manufactured in alloy steel.
Anti-corrosion treatment ofchemical nickel.
Also available in stainless steel(depending on the capacity.
Can be supplied including hinges(optional accessories).
Dimensions depending oncustomer requirements.
CAPACITIES
From 1000 to 60000 kgTLCX
Cable connection
Exciting + . . . . . . RedExciting - . . . . . . . BlackSignal + . . . . . . . . GreenSignal -. . . . . . . . . White
M12 Connector
Connetion
By output cable or M12 connector pannel.
Output: Several options(mV, mA, V).
18
CÉLULAS DE CARGA
ESPECIFICACIONES TÉCNICAS
Cuadro de cotas a rellenar
Cotas A ØB C D E F G H J ØK
mm
Sensibilidad 1mV/V
Ajuste tolerancia sensibilidad 10%
Ajuste tolerancia de cero 1% F.E.
Tensión de excitación ≤ 24V
No linealidad <0.034% F.E.
No repetibilidad <0.024% F.E.
Error combinado <0.045% F.E.
Histéresis <0.027% F.E.
Fluencia en 30 minutos <0.037% F.E.
Efecto temp. en sensibilidad <0.034%
Efecto temp. en cero <0.024%/5ºC
Margen compensado de temperatura -10ºC/+40ºC
Resistencia de entrada 700±3ΩResistencia de salida 700±3ΩResistencia de aislamiento (V.Test=100V) >5000 106ΩMáxima carga de trabajo 150% F.E.
Límite de carga sin perder características 200% F.E.
Carga de rotura >500% F.E.
Cable Flexible 4x0.25mm
Protección IP 66IP 68
Bulón de carga. Se utiliza ensistemas de pesaje ylimitación de carga.
Se fabrica en acero aleado oacero inoxidable.
En el caso del acero aleado,lleva un tratamientoanticorrosión de níquelquímico
CAPACIDADES
según necesidadesBulón (Doble cortadura)
19
LOAD CELL
TECHNICAL CHARACTERISTICS
Bench mark chart to fill up
Dimension A ØB C D E F G H J ØK
mm
Sensibility 1mV/V
Tolerance adjust sensibility 10%
Tolerance adjust on zero 1% F.S.
Tension of excitation ≤ 24V
Non Linearity <0.034% F.S.
Non Repeatibility <0.024% F.S.
Combined error <0.045% F.S.
Hysteresis <0.027% F.S.
Creep in 30 minutes <0.037% F.S.
Temp. effect on sensibility <0.034%
Temp. effect on zero <0.024%/5ºC
Compensated margin of temperature -10ºC/+40ºC
Input resistance 700±3ΩOutput resistance 700±3ΩInsulation resistance (V.Test=100V) >5000 106ΩMaximum work load 150% F.S.
Load limit without loss of characteristics 200% F.S.
Break load >500% F.S.
Cable Flexible 4x0.25mm
Protection IP 66IP 68
Load pin Bulon type used inweighing system and loadlimitation.
Manufactured in alloy steelor stainless steel.
Anti-corrosion treatment ofchemical nickel (Alloy steel).
CAPACITIES
Depending on necessities
Load pin (Double shear)
LOAD APPLICATION
SUPPORT SUPPORT
20
CÉLULAS DE CARGA
ESPECIFICACIONES TÉCNICAS
Sensibilidad 2mV/V
Ajuste tolerancia sensibilidad 5%
Ajuste tolerancia de cero 2% F.E.
Tensión de excitación ≤ 12V
No linealidad <0.034% F.E.
No repetibilidad <0.034% F.E.
Error combinado <0.07% F.E.
Histéresis <0.07% F.E.
Fluencia en 30 minutos <0.037% F.E.
Efecto temp. en sensibilidad <0.034%
Efecto temp. en cero <0.024%/5ºC
Margen compensado de temperatura -10ºC/+40ºC
Resistencia de entrada 350Ω±3Ω
Resistencia de salida 350Ω±1.5Ω
Resistencia de aislamiento (V.Test=100V) >5000 106Ω
Máxima carga de trabajo 150% F.E.
Límite de carga sin perder características 200% F.E.
Carga de rotura >300% F.E.
Cable (Longitud: 4 metros) Flexible 4x0.25mm
Protección IP 66
Esta série de células LM se utilizan paramedir la carga en cables de acero..
Su fabricación se realiza en aceroaleado o acero inoxidable.
En el caso del acero aleado, lleva untratamiento anticorrosión de níquelquímico.
CAPACIDADES
1000, 2000, 3500, 7000 y 15000 kg
LM
Longitud Modelo Capacidades A B C D E F ØH cable
1000kg2000kg
LMP3500kg
188 140 26 8 M-6 65 7-26 4m
7000kg
15000kgLMG
(máx.)322 260 36 10 M-8 88 19-32 4m
21
LOAD CELL
TECHNICAL CHARACTERISTICS
Sensibility 2mV/V
Tolerance adjust sensibility 5%
Tolerance adjust on zero 2% F.S.
Tension of excitation ≤ 12V
Non Linearity <0.034% F.S.
Non Repeatibility <0.034% F.S.
Combined error <0.07% F.S.
Hysteresis <0.07% F.S.
Creep in 30 minutes <0.037% F.S.
Temp. effect on sensibility <0.034%
Temp. effect on zero <0.024%/5ºC
Compensated margin of temperature -10ºC/+40ºC
Input resistance 350Ω±3Ω
Output resistance 350Ω±1.5Ω
Insulation resistance (V.Test=100V) >5000 106Ω
Maximum work load 150% F.S.
Load limit without loss of characteristics 200% F.S.
Break load >300% F.S.
Cable Flexible 4x0.25mm
Protection IP 66
Load cells specially designed for measuringthe load in steel cables.
Manufactured in alloy steel or stainless steel.
Anti-corrosion treatment of chemical nickel(Alloy steel).
CAPACITIES
1000, 2000, 3500, 7000 and15000 kg
LM
Cable Model Capacities A B C D E F ØH length
1000kg2000kg
LMP3500kg
188 140 26 8 M-6 65 7-26 4m
7000kg
15000kgLMG
(max.)322 260 36 10 M-8 88 19-32 4m
22
CÉLULAS DE CARGA
ESPECIFICACIONES TÉCNICAS
Sensibilidad Aprox. 1.5mV/V
Ajuste tolerancia sensibilidad 5%
Ajuste tolerancia de cero 2% F.E.
Alimentación De 24 a 48 Vdc
No linealidad <0.034% F.E.
No repetibilidad <0.034% F.E.
Error combinado <0.07% F.E.
Histéresis <0.07% F.E.
Fluencia en 30 minutos <0.037% F.E.
Efecto temp. en sensibilidad <0.034% F.E.
Efecto temperatura en cero <0.024%/5ºC
Margen compensado de temperatura -10ºC/+40ºC
Resistencia de entrada 350Ω±3Ω
Resistencia de salida 350Ω±1.5Ω
Resistencia de aislamiento (V.Test=100V) >5000 MΩ
Máxima carga de trabajo 150% F.E.
Límite de carga sin perder características 200% F.E.
Carga de rotura >300% F.E.
Cable (Longitud: 4 metros) Flexible ø6 6x0.22mm
Protección IP 66
Células diseñadas para la limitación decargas en cables de acero.
Equipo electrónico integrado con 2 relésprogramables.
Detección de cable flojo medianteprogramación.
Se suministran con bridas adaptadas aldiámetro de los cables.
CAPACIDADES
LMPK: 1000, 2000, 3500 y 7000LMGK: 15000 y 20000 kg
LMPKLMGK
Modelo Capacidades A B C D E øF Cable
1000 kg
LMPK2000 kg
188 28 26 140 M6 7/26 4m3500 kg7000 kg
LMGK15000 kg
322 32 36 260 M8 19/32 4m20000 kg
Código de colores
Rojo Alimentación +Vcc (24-48 Vcc)
Negro Alimentación -Vcc
AmarilloContacto de relé (AL-C)Azul
BlancoContacto de relé (AL-S)Verde
Malla Tierra (GND)
23
LOAD CELL
TECHNICAL CHARACTERISTICS
Sensibility Aprox. 1.5mV/V
Tolerance adjust sensibility 5%
Tolerance adjust on zero 2% F.S.
Excitation Voltage From 24 to 48 Vdc
Non Linearity <0.034% F.S.
Non Repeatibility <0.034% F.S.
Combined error <0.07% F.S.
Hysteresis <0.07% F.S.
Creep in 30 minutes <0.037% F.S.
Temp. effect on sensibility <0.034% F.S.
Temperature effect on zero <0.024%/5ºC
Compensated margin of temperature -10ºC/+40ºC
Input resistance 350Ω±3Ω
Output resistance 350Ω±1.5Ω
Insulation resistance (V.Test=100V) >5000 MΩ
Maximum work load 150% F.S.
Load limit without loss of characteristics 200% F.S.
Break load >300% F.S.
Cable (4 meters) Flexible ø6 6x0.22mm
Protection IP 66
Load cell specially designed for measuringloads in steel cables.
Integrated controller with two programmablerelays.
Slack rope detection.
Supplied with clamps adapted to the cablediameter.
CAPACITIES
LMPK: 1000, 2000, 3500 and 7000 kgLMGK: 15000 and 20000 kg
LMPKLMGK
Modelo Capacidades A B C D E øF Cable
1000 kg
LMPK2000 kg
188 28 26 140 M6 7/26 4m3500 kg7000 kg
LMGK15000 kg
322 32 36 260 M8 19/32 4m20000 kg
Connection
Red Supply +Vcc (24-48 Vcc)
Black Alimentación -Vcc
YellowRelay Contact (AL-C)Blue
WhiteRelay Contact (AL-S)Green
Mesh Ground (GND)
24
CÉLULAS DE CARGA
ESPECIFICACIONES TÉCNICAS
Sensibilidad Aprox. 1.5mV/V
Ajuste tolerancia sensibilidad 5%
Ajuste tolerancia de cero 2% F.E.
Alimentación De 5 a 15 Vdc
No linealidad <0.034% F.E.
No repetibilidad <0.034% F.E.
Error combinado <0.07% F.E.
Histéresis <0.07% F.E.
Fluencia en 30 minutos <0.037% F.E.
Efecto temp. en sensibilidad <0.034% F.E.
Efecto temperatura en cero <0.024%/5ºC
Margen compensado de temperatura -10ºC/+40ºC
Resistencia de entrada 350Ω±3Ω
Resistencia de salida 350Ω±1.5Ω
Resistencia de aislamiento (V.Test=100V) >5000 MΩ
Máxima carga de trabajo 150% F.E.
Límite de carga sin perder características 200% F.E.
Carga de rotura >300% F.E.
Cable (Longitud: 4 metros) Flexible ø6 4x0.22mm
Protección IP 66
Esta célula se utiliza para medir lacarga en cables de acero.
Su fabricación se realiza en aluminio dealta resistencia.
CAPACIDADES
1000, 2000, 4000, 6000, 8000 y 10000 kg
LMS
Mod. LMS1 LMS2 LMS3 LMS4
Cap. (Tn) 1 - 2 4 6 8 10
ø cable 6, 7, 8 9, 10, 11, 12 13, 14, 16 18, 20 22
A 125 142 165 185
B 25.5 31
C 29 31
BRIDA LMS12 (ø5... ø12) LMS34 (ø13...ø22)
25
LOAD CELL
TECHNICAL CHARACTERISTICS
Sensibility Aprox. 1.5mV/V
Tolerance adjust sensibility 5%
Tolerance adjust on zero 2% F.S.
Excitation Voltage From 5 to 15 Vdc
Non Linearity <0.034% F.S.
Non Repeatibility <0.034% F.S.
Combined error <0.07% F.S.
Hysteresis <0.07% F.S.
Creep in 30 minutes <0.037% F.S.
Temp. effect on sensibility <0.034% F.S.
Temperature effect on zero <0.024%/5ºC
Compensated margin of temperature -10ºC/+40ºC
Input resistance 350Ω±3Ω
Output resistance 350Ω±1.5Ω
Insulation resistance (V.Test=100V) >5000 MΩ
Maximum work load 150% F.S.
Load limit without loss of characteristics 200% F.S.
Break load >300% F.S.
Cable (4 meters) Flexible ø6 4x0.22mm
Protection IP 66
Load cells specially designed formeasuring loads in steel cables.
Made in high resistence alluminium.
CAPACITIES
1000, 2000, 4000, 6000, 8000 and 10000 kg
LMS
Mod. LMS1 LMS2 LMS3 LMS4
Cap. (Tn) 1 - 2 4 6 8 10
ø cable 6, 7, 8 9, 10, 11, 12 13, 14, 16 18, 20 22
A 125 142 165 185
B 25.5 31
C 29 31
CLAMP LMS12 (ø5... ø12) LMS34 (ø13...ø22)
26
CÉLULAS DE CARGA
El INS-2r es un equipo de control para visualizar de forma precisa y continuada el estado de lacarga y/o el nivel del contenido almacenados en depósitos o silos. Los datos se transmitenmediante células de carga, gama SK, o sensores SD1000.
Lleva 2 entradas con barra de nivel porcentual independientes.
Visualiza el peso de cada silo o la suma de ambos mediante display numérico de 5 dígitos.
Su resolución interna es de ±32000 puntos.
La comunicación puede ser opcional. - Comunicación 485 o RS232 - 2 relés
Programación por teclado.
Tiene la posibilidad de hacer un cero temporal para comprobar una carga o descarga.
Tiene capacidad para alimentar 8 células. Capacidad de control de 2 silos simultáneamente.
Equipo para medir el nivel en silosINS-2r
27
LOAD CELL
The INS-2r device is specially designed for weighing and measuring level in silos. Data aresupplied by SK load cells or SD1000 sensors.
Two independent inputs with bar of percentage level.
Numeric display of 5 digits to visualize the weight of each silo, or the sum of both.
Internal resolution ±32000 points.
Relay, communication, or optional output signal.
Keyboard programming.
Possibility of making a temporary zero to check a load or discharge.
Capacity to feed 8 cells. It is possible to control 2 silos at the same time.
Accessories: frame and support for panel placement.Options:- Communication 485
or RS-232- Plate of 2 or 4 relays.
Silos level measure deviceINS-2r
28
CÉLULAS DE CARGA
ESPECIFICACIONES TÉCNICAS
Contenido del sensor
Sensor SD1000
Caja de conexión
Útiles para su instalación
Útil SD1000Broca Ø6.5mmBroca Ø10mmBroca Ø18.5mmEscariador Ø19mm H7
Sensibilidad 2mV/V / 1000µε
Ajuste tolerancia sensibilidad 1%
Ajuste tolerancia de cero 10% F.E.
Tensión de excitación < 12V
No linealidad <0.034% F.E.
No repetibilidad <0.034% F.E.
Error combinado <0.07% F.E.
Histéresis <0.07% F.E.
Efecto temp. en sensibilidad <0.034%
Efecto temp. en cero <0.024%/5ºC
Margen compensado de temperatura -10ºC/+40ºC
Resistencia de entrada 700±2Ω
Resistencia de salida 700±2Ω
Resistencia de aislamiento (V.Test=100V) >5000 106Ω
Deformación máxima 200% F.E.
Carga de rotura >500% F.E.
Sensor de carga diseñado para medirdeformaciones en vigas de acero.
Este SENSOR SD1000 es el más idóneopara poder medir el nivel en silos,tolvas, depósitos, etc. que vansostenidos por estructuras metálicas.
CAPACIDAD: 1000 μεSD1000
29
LOAD CELL
TECHNICAL CHARACTERISTICS
Sensor content
SD1000 Sensor
Connection box
Installation tools
SD1000 toolDrill Ø6.5mmDrill Ø10mmDrill Ø18.5mmReamer Ø19mm H7
Sensibility 2mV/V / 1000µε
Tolerance adjust sensibility 1%
Tolerance adjust on zero 10% F.S.
Tension of excitation < 12V
Non Linearity <0.034% F.S.
Non Repeatibility <0.034% F.S.
Combined error <0.07% F.S.
Hysteresis <0.07% F.S.
Temp. effect on sensibility <0.034%
Temp. effect on zero <0.024%/5ºC
Compensated margin of temperature -10ºC/+40ºC
Input resistance 700±2Ω
Output resistance 700±2Ω
Insulation resistance (V.Test=100V) >5000 106Ω
Maximum work load 200% F.S.
Break load >500% F.S.
Load sensor specially designed tomeasure deformations in steel beams.
The most usual applications of thesensor SD-1000 are for the levelmeasure in silos, chutes, deposits, etc,supported by metallic structures.
SD1000CAPACITIE: 1000 με
30
CÉLULAS DE CARGA
ESPECIFICACIONES TÉCNICAS
Sensibilidad 2mV/V
Ajuste tolerancia sensibilidad 0.1%
Ajuste tolerancia de cero <1% F.E.
Tensión de excitación ≤ 24V
No linealidad <0.015% F.E.
No repetibilidad <0.012% F.E.
Error combinado <0.029% F.E.
Histéresis <0.012% F.E.
Fluencia en 30 minutos <0.025% F.E.
Efecto temp. en sensibilidad <0.023% F.E.
Efecto temp. en cero <0.016%/5ºC
Margen compensado de temperatura -10ºC/+40ºC
Resistencia de entrada 760Ω±10Ω
Resistencia de salida 700Ω±3Ω
Resistencia de aislamiento (V.Test=100V) >5000 106Ω
Máxima carga de trabajo 150% F.E.
Límite de carga sin perder características 200% F.E.
Carga de rotura >300% F.E.
Cable (longitud de 8 metros) Flexible 6x0.25mm
Protección IP 66
Células especialmente diseñadas para elcontrol de la carga en silos.
Estas células de doble cortadura, sefabrican en acero aleado.
Soporte antivuelco en bajo perfil tratadocon pintura altamente resistente a lacorrosión.
CAPACIDADES
1000, 2000, 3000, 4000, 4500, 5000 y 6000 kg
SKP
31
LOAD CELL
TECHNICAL CHARACTERISTICS
Sensibility 2mV/V
Tolerance adjust sensibility 0.1%
Tolerance adjust on zero <1% F.S.
Tension of excitation ≤ 24V
Non Linearity <0.015% F.S.
Non Repeatibility <0.012% F.S.
Combined error <0.029% F.S.
Hysteresis <0.012% F.S.
Creep in 30 minutes <0.025% F.S.
Temp. effect on sensibility <0.023% F.S.
Temp. effect on zero <0.016%/5ºC
Compensated margin of temperature -10ºC/+40ºC
Input resistance 760Ω±10Ω
Output resistance 700Ω±3Ω
Insulation resistance (V.Test=100V) >5000 106Ω
Maximum work load 150% F.E.
Load limit without loss of characteristics 200% F.E.
Break load >300% F.E.
Cable length 8 m Flexible 6x0.25mm
Protection IP 66
Load cell specially designed for weighingsilos with anti-overturn support.
It is a double shear load cell and it can bemanufactured in stainless steel or alloysteel with protection of chemical nickel.
Low profile support, treated with highlyresistant paint against corrosion.
CAPACITIES
1000, 2000, 3000, 4000, 4500, 5000 and 6000 kg
SKP
TOP COUNTER-PLATE
INSULATING PLATE
INSULATING PLATE
BOTTOM COUNTER-PLATE
SCREW M-12
WASHER
INSULATING CASE
32
CÉLULAS DE CARGA
ESPECIFICACIONES TÉCNICAS
Sensibilidad 2mV/V
Ajuste tolerancia sensibilidad 0.1%
Ajuste tolerancia de cero <1% F.E.
Tensión de excitación ≤ 24V
No linealidad <0.015% F.E.
No repetibilidad <0.012% F.E.
Error combinado <0.029% F.E.
Histéresis <0.012% F.E.
Fluencia en 30 minutos <0.025% F.E.
Efecto temp. en sensibilidad <0.023% F.E.
Efecto temp. en cero <0.016%/5ºC
Margen compensado de temperatura -10ºC/+40ºC
Resistencia de entrada 760Ω±10Ω
Resistencia de salida 700Ω±3Ω
Resistencia de aislamiento (V.Test=100V) >5000 106Ω
Máxima carga de trabajo 150% F.E.
Límite de carga sin perder características 200% F.E.
Carga de rotura >300% F.E.
Cable (longitud de 8 metros) Flexible 6x0.25mm
Protección IP 66
Células especialmente diseñadas para elcontrol de la carga en silos.
Estas células de doble cortadura, se fabricanen acero aleado o acero inoxidable.
Soporte antivuelco en bajo perfil tratadocon pintura altamente resistente a lacorrosión.
CAPACIDADES
8000, 10000 y 15000 kgSKM
33
LOAD CELL
TECHNICAL CHARACTERISTICS
Sensibility 2mV/V
Tolerance adjust sensibility 0.1%
Tolerance adjust on zero <1% F.S.
Tension of excitation ≤ 24V
Non Linearity <0.015% F.S.
Non Repeatibility <0.012% F.S.
Combined error <0.029% F.S.
Hysteresis <0.012% F.S.
Creep in 30 minutes <0.025% F.S.
Temp. effect on sensibility <0.023% F.S.
Temp. effect on zero <0.016%/5ºC
Compensated margin of temperature -10ºC/+40ºC
Input resistance 760Ω±10Ω
Output resistance 700Ω±3Ω
Insulation resistance (V.Test=100V) >5000 106Ω
Maximum work load 150% F.S.
Load limit without loss of characteristics 200% F.S.
Break load >300% F.S.
Cable length 8 m Flexible 6x0.25mm
Protection IP 66
CAPACITIES
8000, 10000 and 15000 kg
Load cell specially designed for weighingsilos with anti-overturn support.
It is a double shear load cell and it can bemanufactured in stainless steel or alloy steelwith protection of chemical nickel.
Low profile support, treated with highlyresistant paint against corrosion.
SKM
TOP COUNTER-PLATE
INSULATING PLATE
INSULATING PLATE
BOTTOM COUNTER-PLATE
SCREW M-16
WASHER
INSULATING CASE
34
CÉLULAS DE CARGA
ESPECIFICACIONES TÉCNICAS
Sensibilidad 2mV/V
Ajuste tolerancia sensibilidad 0.1%
Ajuste tolerancia de cero <1% F.E.
Tensión de excitación ≤ 24V
No linealidad <0.015% F.E.
No repetibilidad <0.012% F.E.
Error combinado <0.029% F.E.
Histéresis <0.012% F.E.
Fluencia en 30 minutos <0.025% F.E.
Efecto temp. en sensibilidad <0.023% F.E.
Efecto temp. en cero <0.016%/5ºC
Margen compensado de temperatura -10ºC/+40ºC
Resistencia de entrada 760Ω±10Ω
Resistencia de salida 700Ω±3Ω
Resistencia de aislamiento (V.Test=100V) >5000 106Ω
Máxima carga de trabajo 150% F.E.
Límite de carga sin perder características 200% F.E.
Carga de rotura >300% F.E.
Cable (longitud de 8 metros) Flexible 6x0.25mm
Protección IP 66
Células especialmente diseñadas para elcontrol de la carga en silos.
Estas células de doble cortadura, sefabrican en acero aleado o en aceroinoxidable.
Soporte en bajo perfil tratado con pinturaaltamente resistente a la corrosión.
CAPACIDADES
20, 25, 30, 40 y 50 TnSKG
35
LOAD CELL
TECHNICAL CHARACTERISTICS
Sensibility 2mV/V
Tolerance adjust sensibility 0.1%
Tolerance adjust on zero <1% F.S.
Tension of excitation ≤ 24V
Non Linearity <0.015% F.S.
Non Repeatibility <0.012% F.S.
Combined error <0.029% F.S.
Hysteresis <0.012% F.S.
Creep in 30 minutes <0.025% F.S.
Temp. effect on sensibility <0.023% F.S.
Temp. effect on zero <0.016%/5ºC
Compensated margin of temperature -10ºC/+40ºC
Input resistance 760Ω±10Ω
Output resistance 700Ω±3Ω
Insulation resistance (V.Test=100V) >5000 106Ω
Maximum work load 150% F.S.
Load limit without loss of characteristics 200% F.S.
Break load >300% F.S.
Cable length 8 m Flexible 6x0.25mm
Protection IP 66
Load cell specially designed for weighingsilos with anti-overturn support.
It is a double shear load cell and it can bemanufactured in stainless steel or alloysteel with protection of chemical nickel.
Low profile support, treated with highlyresistant paint against corrosion.
CAPACITIES
20, 25, 30, 40 and 50 Tn
TOP COUNTER-PLATE
INSULATING PLATE
INSULATING PLATE
BOTTOM COUNTER-PLATE
SCREW M-20
WASHER
INSULATING CASE
SKG
36
CÉLULAS DE CARGA
ESPECIFICACIONES TÉCNICAS
CAPACIDADES
500, 1000, 3000 y 5000 kg
Sensibilidad 2mV/V
Ajuste tolerancia sensibilidad 1%
Ajuste tolerancia de cero 2% F.E.
Tensión de excitación ≤ 12V
No linealidad <0.059% F.E.
No repetibilidad <0.034% F.E.
Error combinado <0.07% F.E.
Histéresis <0.048% F.E.
Fluencia en 30 minutos <0.037% F.E.
Efecto temp. en sensibilidad <0.034%
Efecto temp. en cero <0.024%/5ºC
Margen compensado de temperatura -10ºC/+40ºC
Resistencia de entrada 380±10ΩResistencia de salida 350Ω±3ΩResistencia de aislamiento (V.Test=100V) >5000 106ΩMáxima carga de trabajo 150% F.E.
Límite de carga sin perder características 200% F.E.
Carga de rotura >300% F.E.
Cable Flexible 4x0.25mm
Protección IP 66IP 68
Célula de carga diseñada para trabajar acompresión.
Se aplica habitualmente en la industriaautomovilística.
Se fabrica en acero aleado con tratamientoanticorrosión de níquel químico o en aceroinoxidable.
BP2093
37
LOAD CELL
TECHNICAL CHARACTERISTICS
Sensibility 2mV/V
Tolerance adjust sensibility 1%
Tolerance adjust on zero 2% F.S.
Tension of excitation ≤ 12V
Non Linearity <0.059% F.S.
Non Repeatibility <0.034% F.S.
Combined error <0.07% F.S.
Hysteresis <0.048% F.S.
Creep in 30 minutes <0.037% F.S.
Temp. effect on sensibility <0.034%
Temp. effect on zero <0.024%/5ºC
Compensated margin of temperature -10ºC/+40ºC
Input resistance 380±10ΩOutput resistance 350Ω±3ΩInsulation resistance (V.Test=100V) >5000 106ΩMaximum work load 150% F.S.
Load limit without loss of characteristics 200% F.S.
Break load >300% F.S.
Cable Flexible 4x0.25mm
Protection IP 66IP 68
Load cell specially designed to work oncompression.
It is usually applied in the automotiveindustry.
Anti-corrosion treatment of chemical nickel(Alloy steel).
CAPACITIES
500, 1000, 3000 and 5000 kgBP2093
38
CÉLULAS DE CARGA
ESPECIFICACIONES TÉCNICAS
Sensibilidad 2mV/V
Ajuste tolerancia sensibilidad 1%
Ajuste tolerancia de cero 5% F.E.
Tensión de excitación ≤ 12V
No linealidad ≤ 0.09% F.E.
No repetibilidad <0.15% F.E.
Error combinado <0.3% F.E.
Histéresis <0.2% F.E.
Fluencia en 30 minutos <0.16% F.E.
Efecto temp. en sensibilidad <0.05% F.E.
Efecto temp. en cero <0.023%/5ºC
Margen compensado de temperatura -10ºC/+40ºC
Resistencia de entrada 350Ω±3Ω
Resistencia de salida 350Ω±1.5Ω
Resistencia de aislamiento (V.Test=100V) >5000 106Ω
Máxima carga de trabajo 150% F.E.
Límite de carga sin perder características 200% F.E.
Carga de rotura >300% F.E.
Cable (longitud de 8 metros) Flexible 4x0.25mm
Protección IP 66
Estas células se han diseñado para medir el par del frenómetro.
Se fabrican en acero aleado con tratamientoanticorrosión de níquel químico.
Disponibles en acero inoxidable.
CAPACIDAD 500 kg
PAR 500
39
LOAD CELL
TECHNICAL CHARACTERISTICS
Sensibility 2mV/V
Tolerance adjust sensibility 1%
Tolerance adjust on zero 5% F.S.
Tension of excitation ≤ 12V
Non Linearity ≤ 0.09% F.S.
Non Repeatibility <0.15% F.S.
Combined error <0.3% F.S.
Hysteresis <0.2% F.S.
Creep in 30 minutes <0.16% F.S.
Temp. effect on sensibility <0.05% F.S.
Temp. effect on zero <0.023%/5ºC
Compensated margin of temperature -10ºC/+40ºC
Input resistance 350Ω±3Ω
Output resistance 350Ω±1.5Ω
Insulation resistance (V.Test=100V) >5000 106Ω
Maximum work load 150% F.S.
Load limit without loss of characteristics 200% F.S.
Break load >300% F.S.
Cable length 8 m Flexible 4x0.25mm
Protection IP 66
Load cells specially designed for a torque measure ofthe brake tester.
Manufactured in alloy steel or stainless steel.
Anticorrosion treatment of chemical níkel (alloy steel).
CAPACITIE 500 kg
PAR 500
40
CÉLULAS DE CARGA
ESPECIFICACIONES TÉCNICAS
Sensibilidad 2mV/V
Ajuste tolerancia sensibilidad 1%
Ajuste tolerancia de cero 5% F.E.
Tensión de excitación ≤ 12V
No linealidad ≤ 0.09% F.E.
No repetibilidad <0.15% F.E.
Error combinado <0.3% F.E.
Histéresis <0.2% F.E.
Fluencia en 30 minutos <0.16% F.E.
Efecto temp. en sensibilidad <0.05% F.E.
Efecto temp. en cero <0.023%/5ºC
Margen compensado de temperatura -10ºC/+40ºC
Resistencia de entrada 350Ω±3Ω
Resistencia de salida 350Ω±1.5Ω
Resistencia de aislamiento (V.Test=100V) >5000 106Ω
Máxima carga de trabajo 150% F.E.
Límite de carga sin perder características 200% F.E.
Carga de rotura >300% F.E.
Cable (longitud de 8 metros) Flexible 4x0.25mm
Protección IP 66
Estas células se han diseñado para medir el pardel frenómetro.
Se fabrican en acero aleado con tratamientoanticorrosión por níquel químico.
Disponibles en acero inoxidable.
CAPACIDAD 750 kgPAR 750
41
LOAD CELL
TECHNICAL CHARACTERISTICS
Sensibility 2mV/V
Tolerance adjust sensibility 1%
Tolerance adjust on zero 5% F.S.
Tension of excitation ≤ 12V
Non Linearity ≤ 0.09% F.S.
Non Repeatibility <0.15% F.S.
Combined error <0.3% F.S.
Hysteresis <0.2% F.S.
Creep in 30 minutes <0.16% F.S.
Temp. effect on sensibility <0.05% F.S.
Temp. effect on zero <0.023%/5ºC
Compensated margin of temperature -10ºC/+40ºC
Input resistance 350Ω±3Ω
Output resistance 350Ω±1.5Ω
Insulation resistance (V.Test=100V) >5000 106Ω
Maximum work load 150% F.S.
Load limit without loss of characteristics 200% F.S.
Break load >300% F.S.
Cable length 8 m Flexible 4x0.25mm
Protection IP 66
Load cells specially designed to measure the braking forcein brake testers
Manufactured in alloy steel or stainless steel.
Anticorrosion treatment of chemical nickel (alloy steel).
CAPACITIE: 750 kg
PAR 750
42
CÉLULAS DE CARGA
ESPECIFICACIONES TÉCNICAS
Sensibilidad 2mV/V
Ajuste tolerancia sensibilidad 0.1%
Ajuste tolerancia de cero 1% F.E.
Tensión de excitación ≤ 12V
No linealidad <0.015% F.E.
No repetibilidad <0.011% F.E.
Error combinado <0.027% F.E.
Histéresis <0.009% F.E.
Fluencia en 30 minutos <0.025% F.E.
Efecto temp. en sensibilidad <0.023% F.E.
Efecto temp. en cero <0.016%/5ºC
Margen compensado de temperatura -10ºC/+40ºC
Resistencia de entrada 380Ω±10Ω
Resistencia de salida 350Ω±3Ω
Resistencia de aislamiento (V.Test=100V) >5000 106Ω
Máxima carga de trabajo 150% F.E.
Límite de carga sin perder características 200% F.E.
Carga de rotura >300% F.E.
Cable (Longitud de 4 metros) Flexible 4x0.25mm
Protección IP 66
Células diseñadas paratrabajar en voladizo conelemento sensor acortadura.
Estas células se fabrican enacero aleado con untratamiento anticorrosión deníquel químico o en aceroinoxidable.
CAPACIDADES
500, 1000, 1500 y 3000 kg
CFD
Capacidades A B C D Een kg en mm
5001000 24 Ø34 M10 Ø13 481500
20003000
34 Ø45 M16 Ø16.5 58
43
LOAD CELL
TECHNICAL CHARACTERISTICS
Sensibility 2mV/V
Tolerance adjust sensibility 0.1%
Tolerance adjust on zero 1% F.S.
Tension of excitation ≤ 12V
Non Linearity <0.015% F.S.
Non Repeatibility <0.011% F.S.
Combined error <0.027% F.S.
Hysteresis <0.009% F.S.
Creep in 30 minutes <0.025% F.S.
Temp. effect on sensibility <0.023% F.S.
Temp. effect on zero <0.016%/5ºC
Compensated margin of temperature -10ºC/+40ºC
Input resistance 380Ω±10Ω
Output resistance 350Ω±3Ω
Insulation resistance (V.Test=100V) >5000 106Ω
Maximum work load 150% F.S.
Load limit without loss of characteristics 200% F.S.
Break load >300% F.S.
Cable length 4 m Flexible 4x0.25mm
Protection IP 66
Load cells speciallydesigned to work in juttingout, with shear sensorelement.
Manufactured in alloy steel.Anti-corrosion treatment ofchemical nickel (Alloysteel).
CAPACITIES
500, 1000, 1500 and 3000 kg
OPTIONAL ACCESORIES
CFD
Capacities A B C D Ein kg in mm
5001000 24 ø34 M10 ø13 481500
20003000
34 ø45 M16 ø16.5 58
44
Dinacell Electrónica, S.L.Pol. Ind. Santa Ana. C/ El Torno, 8. 28522 Rivas Vaciamadrid (Madrid) España Tel.: +34 91 300 14 35 Fax: +34 91 300 16 45. www.dinacell.com
Células de cargaLoad cells
Dinacell electrónica, s.l.Pol. Ind. Santa Ana - C/ El Torno, 8 - 28529 Rivas Vaciamadrid (Madrid) - Tel. 913 001 435 - Fax: 913 001 645
E-mail: dinacell@dinacell.com - http://www.dinacell.com
Recommended