Embed Size (px)
Citation preview
Catalog #
Project
Comments
Prepared by
Type
Date
DESCRIPTION
SPECIFICATION FEATURES
Construction
Controls
23-DS
Straight &
Narrow
Surface
Direct
LED
Electrical
Finish
Mounting
Warranty
Five year warranty.
ORDERING I NFORMATION
Series
S23 = Series 23
Mounting
S = Surface
Mounting TypeLED Color Temp
L30 = LED, 3000K
L35 = LED, 3500K
L40 = LED, 4000K
Light Output
D = Direct
Light Level
S23 S – – – – – –
Sample Number: S23-DS-2L35-ETG-4-U-DD-SI-S92-W
Driver Options
Emergency Options
EM = Battery Pack EC = Emergency Circuit
DD = 0-10V Dimming
5LT = FifthLight DALI
LUT = Lutron DALI
NOTES:
Not all options available. Please consult your local Cooper Lighting Representative for availability.
Specifications and dimensions subject to change without notice.
1. Light Level measured at 3500K; add 10% lumen output for 4000K or subtract 10% lumen output for 3000K.
2. Battery packs must be remote mounted
3. For vertical and horizontal in-wall mounting use snap-in lens
4" [101mm]
Driven by performance and a clean aesthetic, the Straight and Narrow Series in LED
represents the ultimate in simplicity; a narrow, uniform line of light. Constructed withpremium materials with industry leading technology, the Straight and Narrow familyis availible in configurable runs and individual lengths of 2’, 3’, 4’, 6’ and 8’. Fully
compatible with Cooper Controls FifthLight DALI and shipped standard with 0-10Vdimming, the Straight and Narrow family integrates seamlessly with today’s modernbuilding management systems. With virtually unlimited applications, the Straight and
Narrow family allows architects and designers the freedom to experiment with theirdesigns without exceeding ever decreasing energy budgets.
Housing extruded from premium6063 aluminum. Nominal 2', 3', 4',
6' or 8' illuminated sections. Usedin run configuration and/orindividual fixtures. All componentsare RoHs compliant.
Lens
Available in snap-in or lay-in profiles,two diffusion options are available.Satin white provides the highest
aesthetic uniformity while the hightransmission lens provides themost superior efficacy.
Fixture housings are highreflectance white usingelectrostatically applied polyester
powder coat paint.
Long-life LED system coupled withelectrical driver to deliver optimal
performance. LED’s are available in3000K, 3500K or 4000K with atypical CRI ≤ 85. Projected life is 50,000hours at 70% lumen output. Electronic
drivers are available for 120-277Vapplications
Equipped standard with a 0-10V
continuous dimming driver compatiblewith most standard dimmming devices(refer to website for specific compatibility
reference). Combine with FifthLight DALIand other energy saving products likesensors, daylighting controls and buildingmanagement systems to maximize
energy savings.
Circuiting Options
SI = Single Circuit
DU = Dual Circuit
2
3
3
D
3.8" [96mm]
Housing Width
Aperture Size
5.06"
[129mm]
Eaton1000 Eaton BoulevardCleveland, OH 44122United StatesEaton.com
Specifications anddimensions subject tochange without notice.
Eaton’s Cooper Lighting Business1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.com
Surface.Please specify mounting grid
or substrate:
(ETG) = 15/16” Exposed T-grid(FTG) = 9/16” Exposed T-grid
(STG) = 9/16” Screw Slot Grid(SR) = Sheet Rock
ETG = 15/16” Exposed T-grid
FTG = 9/16” Exposed T-grid
STG = 9/16” Screw Slot Grid
SR = Sheet Rock
LED (3500K) per foot
1 = Light Level 1515 Lumens, 7 Watts, 73 LPW
2 = Light Level 2650 Lumens, 9.25 Watts, 70 LPW
Length
2 = 2 foot Individual
3 = 3 foot Individual
4 = 4 foot Individual
6 = 6 foot Individual
8 = 8 foot Individual
xx = Configurable Run
(Specify length in
1ft increments)
ADN130036
4 /15 /2014
Color Options
W = Matte White
S = Silver
XX = Custom Color
Lens Options
S93 = Satin Lay-in LensS93S = Satin Snap-in Lens
S93HT = High Transmission
Lay-in Lens
S93HTS = High Transmission
Snap-in LensVoltage
1 = 120V
2 = 277V
3 = 347V(remote transformer)
U = Universal Voltage
