Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
COMERCIALIZADORA DE INSUMOS Y SUMINISTROS PUNICUS S.A. DE C.V.
Calle 21 de Marzo No. 21, Col. Santa Cruz Atzcapotzaltongo, Toluca, Estado de México, C.P. 50290
Tels.: +52 (722) 242 6975 y +52 (722) 242 6370 [email protected] | www.punicus.com.mx
COMERCIALIZADORA DE INSUMOS Y SUMINISTROS PUNICUS S.A. DE C.V.
Calle 21 de Marzo No. 21, Col. Santa Cruz Atzcapotzaltongo, Toluca, Estado de México, C.P. 50290
Tels.: +52 (722) 242 6975 y +52 (722) 242 6370 [email protected] | www.punicus.com.mx
Accura Tablet De-Burring & De-
Dusting (cGMP, Vibro Type)
TECHNICAL SPECIFICATIONS
MODEL ACRA-DB-300
Out Put (for 8 mm Tablet)* 5,000 to 2,50,000 tab/hr.
Powder 0.25 H.P. / 3 Phase / 1440 RPM
Max Tab. Dia 25mm
Min Tab. Dia 5 mm
Overall Dimensions 400 mm (L) x 400 (W) x 800 mm (H)
* Depending upon the characteristic of material and shape & size of tablets.
SALIENT FEATURES
Compact & elegant, well proven design.
Vibro type, cGMP. & adjustable unit.
Noiseless & Maintenance free unit.
Electric power required less than other machines of its kind.
All contact parts made of SS 304. (SS 316 Optional)
All contact parts can be easily washed and / or sterilized.
Tablet conveying route is geometrically designed, for De-burring.
Efficient de-burring & de-dusting and full suction of excess powder.
Machine can be equipped with additional brushing unit also. (Optional)
This can make additional Cleaning for better surface quality of tablets.
Machine in fitted with the castor wheels for easy mobility
COMERCIALIZADORA DE INSUMOS Y SUMINISTROS PUNICUS S.A. DE C.V.
Calle 21 de Marzo No. 21, Col. Santa Cruz Atzcapotzaltongo, Toluca, Estado de México, C.P. 50290
Tels.: +52 (722) 242 6975 y +52 (722) 242 6370 [email protected] | www.punicus.com.mx
Accura Tablet De-Burring & De-
Dusting (cGMP, Elevating Type)
TECHNICAL SPECIFICATIONS
MODEL AC-DDEL-500
Output (for 8mm tablet)* 5,000 to 2,50,000 tablet / Hour
Conveying Height Differential 250 mm
Max. Tablet Diameter 25 mm
Min. Tablet Diameter 5 mm
Power Supply 230 V, 50 Hz / 1 Ph
*Depending upon tablet shape & size.
SALIENT FEATURES
De-Dusting, De-Burring and Conveying by Vibration: The tried and tested vibration Basis of
these De-Dusters. Fine-tuning of the oscillating magnets with the spring assemblies causes
the tablet to move forward, turning and rotating along the perforated spiral. This removes
dust and burrs resulting from pressing are gently broken off.
Direct De-Dusting and Transport for any Tablet Press: The De-Dusters can be used with any
Tablet Press from any manufacturer.
Simple Disassembly for Cleaning: Loosening a Locking screws allows all the components
mounted on a central shaft to be easily removed. The outer cylinder is pulled off after opening
a collar. All components may be cleaned dry or wet, allowing optimal cleaning to be achieved
in accordance with GMP standards.
Easy Maintenance and Cleaning: The new tablet De-Duster Model AC-DDEL-500 combines
gentle conveying, burring and De-dusting action with very Low noise level, user friendly and
low maintenance, and easy cleaning operations as well. Vibration is limited to the spiral only,
this allows rigid assembly
Can be easily attached with Metal Detector Unit
COMERCIALIZADORA DE INSUMOS Y SUMINISTROS PUNICUS S.A. DE C.V.
Calle 21 de Marzo No. 21, Col. Santa Cruz Atzcapotzaltongo, Toluca, Estado de México, C.P. 50290
Tels.: +52 (722) 242 6975 y +52 (722) 242 6370 [email protected] | www.punicus.com.mx
Accura Dust Extractor (150 CFM, cGMP
MODEL)
TECHNICAL SPECIFICATIONS
MODEL ACRA-DE-150
Suction Capacity 150 C.F.M.
Inlet Connection 4 Nos of Dia 1 ½” (38.1)
Electrical Motor 1 H.P. 2800 RPM 440 V., 50 Hz, 3 Phase
Overall Dimensions 28” (L) X 19” (W) X 32” (H)
Case Dimensions (mm) 660 (L) x 470 (W) x 745 (H)
Net Weight 80 KGS
Gross Weight 100 KGS
Dust Storage Capacity 25 Ltrs.
*Depending upon tablet shape & size.
SALIENT FEATURES
The machine control the flying dust generated during the compression of tablets.
With the use of this unit flying, dust is kept to minimum but it is difficult to eliminate entirely.
Minimizes mechanical strain, excessive wear of tableting machine – resulting in minimum
machine break-downs and punch wears.
Provided with stainless steel S.S 304 contact parts (SS 316 Optional)
Blower fan is dynamically balanced.
Machine in fitted with the castor wheels for easy mobility.
Overcome dust hazards as well as cross contamination at tablet compression.
All inlet manifolds and dust collection trays are of SS 304
Two inlet manifolds facilitate to connect any Tablet press machine And two for De-burring
units.
Handle type shaking arrangements for Cleanning the filter bags.
Filter bags are of high viscose quality.
COMERCIALIZADORA DE INSUMOS Y SUMINISTROS PUNICUS S.A. DE C.V.
Calle 21 de Marzo No. 21, Col. Santa Cruz Atzcapotzaltongo, Toluca, Estado de México, C.P. 50290
Tels.: +52 (722) 242 6975 y +52 (722) 242 6370 [email protected] | www.punicus.com.mx
Accura Dust Extractor (300 CFM,
cGMP MODEL)
TECHNICAL SPECIFICATIONS
MODEL ACRA-DE-300
Suction Capacity 300 CFIVI (500 M3/HR) at 125 mm W.G.
Alteration Area 1.343 M2
Dust Storage Capacity 40 Ltr.
Inlet Manifolds (Four) Did 50 mm 2 Nos. / Did 50 mm 4 Nos.
Electric Motor 1.5 hp/2880 RPM/440 V / 50 Hz/3 Phase
Case Dimensions (mm) 720 (L) x 600 (W) x 1358 (H)
Net Weight (Approx) 170 KGS
Gross Weight (Approx) 270 KGS
Case Dimensions (mm) 870 x 1060 1575 (H)
SALIENT FEATURES
The machine control the flying dust generated during the compression of tablets.
With the use of this unit flying, dust is kept to minimum but it is difficult to eliminate entirely
Provided with stainless steel S.S 304 contact parts (SS 316-Optional)
Blower fan is dynamically balanced.
Machine in fitted with the castor wheels for easy mobility.
Overcome dust hazards as well as cross contamination at tablet compression.
Minimizes mechanical strain, excessive wear of tableting machine – resulting in minimum
machine break-downs and punch wears.
All inlet manifolds and dust collection trays are of SS 304
Four inlet manifolds facilitate to connect any Tablet press machine and two for De-burring
units.
Handle type shaking arrangements for Cleanning the filter bags.
Filter bags are of high viscose quality.
COMERCIALIZADORA DE INSUMOS Y SUMINISTROS PUNICUS S.A. DE C.V.
Calle 21 de Marzo No. 21, Col. Santa Cruz Atzcapotzaltongo, Toluca, Estado de México, C.P. 50290
Tels.: +52 (722) 242 6975 y +52 (722) 242 6370 [email protected] | www.punicus.com.mx
C&C200G
Uphill Deduster
C&C200G Series Uphill Tablet Deduster is new model with advanced structure. It has achieved
double functions of tablet dedusting and elevating. Inlet of the machine can be connected with any
model of tablet press, and outlet with metal detector, so that to realize the production line of tablet
dedusting, elevating, and detecting. Designed with up-to- date concepts and adopting several
advanced technologies, especially suitable for large quantities, large diameter tablets of dust removal
and high transmission, the machine is equipped with following characteristics:
Characteristics:
Body and cover of the machine take building-block design. Height of outlet is easy to adjust.
The machine working chamber and drive chamber are completely segregated with control
chamber, avoided the dust pollute the vibration device and electric control system.
360° circle adjustment of inlet and outlet to make production more convenient and save
factory room.
Fast-joint system to ensure safe and quick disassembly and assembly.
Outstanding efficiency can make mass production of cl>3- cl>35mm all-kind-shape tablet.
Parts in contact with medicine all made of 316L stainless steel. No blind spot during whole
machine cleaning. Meet cGMP demands.
New design motor driver to make machine run more smoothly with lower noise.
COMERCIALIZADORA DE INSUMOS Y SUMINISTROS PUNICUS S.A. DE C.V.
Calle 21 de Marzo No. 21, Col. Santa Cruz Atzcapotzaltongo, Toluca, Estado de México, C.P. 50290
Tels.: +52 (722) 242 6975 y +52 (722) 242 6370 [email protected] | www.punicus.com.mx
Safe and fast tablet conveying at high position
Technical Parameter
Model C&C200G C&C200G1 C&C200G2 C&C200G3
Tablet Diameter (mm) Ø3-Ø35
Max Output Capacity (t/h) 1,800,000(Ø6)
Inlet height (mm) 740-940 740-940 740-940 740-940
Outlet height (mm) 1,125-1,325 1,525-1,725 1,925-2,125 2,325-2,525
Dedusting Distance (m) 6.8 11.1 15.4 19.7
Power Supply 1PH 220V/110V 50Hz/60Hz 0.1kw
Compression Air 0.1m3/min 0.05MPa
Vacuum 2.7 m3/min -0.014MPa
Dimension (mm) 577 X 606 X (1362-1562) 577 X 606 X (1762-1962) 577 X 606 X (2162-2362) 577 X 606 X (2562-2762)
Weight (kg) 120 130 140 150
Note: No additional information noted if there are any changed caused by the technical development.
COMERCIALIZADORA DE INSUMOS Y SUMINISTROS PUNICUS S.A. DE C.V.
Calle 21 de Marzo No. 21, Col. Santa Cruz Atzcapotzaltongo, Toluca, Estado de México, C.P. 50290
Tels.: +52 (722) 242 6975 y +52 (722) 242 6370 [email protected] | www.punicus.com.mx
C&C200F
Uphill Deduster
Characteristics:
Body and cover of the machine take building-block design. Height of outlet is easy to adjust.
The machine working chamber and drive chamber are completely segregated with control
chamber, avoided the dust pollute the vibration device and electric control system.
360° circle adjustment of inlet and outlet to make production more convenient and save
factory room.
Fast-joint system to ensure safe and quick disassembly and assembly.
Outstanding efficiency can make mass production of C113-Cll25mm all-kind-shape tablet.
Parts in contact with medicine all made of 316L stainless steel. No blind spot during whole
machine cleaning. Meet cGMP demands.
New design motor driver to make machine run more smoothly with lower noise.
Technical Parameter
Model C&C200F C&C200F+MD C&C200FA C&C200FA+MD
Tablet Diameter (mm) Ø3-Ø25
Max Output Capacity (t/h) 1,000,000(Ø5)
Inlet height (mm) 825-1,005
Outlet height (mm) 1,210-1,390 920-1,100 1,530-1,710 1,240-1,420
Dedusting Distance (m) 7.5 11.0
Power Supply 1PH 220V/110V 50Hz/60Hz 0.1kw
Compression Air 0.1 m3/min 0.05MPa
Vacuum 2.7 m3/min -0.014MPa
Dimension (mm) 515 X 545 X (1365-1545) 1020 X 600 X (l365-1545) 515 X 545 X (1712-1892) 1020 X 600 X (1712-1892)
Weight (kg) 90 140 100 150
Note: No additional information noted if there are any changed caused by the technical development.
COMERCIALIZADORA DE INSUMOS Y SUMINISTROS PUNICUS S.A. DE C.V.
Calle 21 de Marzo No. 21, Col. Santa Cruz Atzcapotzaltongo, Toluca, Estado de México, C.P. 50290
Tels.: +52 (722) 242 6975 y +52 (722) 242 6370 [email protected] | www.punicus.com.mx
C&C200E
Uphill Deduster
Characteristics:
The machine working chamber and drive chamber are completely segregated with
control chamber, avoided the dust pollute the vibration device and electric control system.
Fast-joint system to ensure safe and quick disassembly and assembly.
Outstanding efficiency can make mass production of «1>3-C1>25mm all-kind-shape tablet.
Parts in contact with medicine all made of 316L stainless steel. No blind spot during whole
machine cleaning. Meet cGMP demands.
New design motor driver to make machine run more smoothly with lower noise.
Technical Parameter
Model C&C200E C&C200E+MD C&C200EA C&C200EA+MD
Tablet Diameter (mm) Ø3-Ø25
Max Output Capacity (t/h) 1,000,000(Ø5)
Inlet height (mm) 800-980
Outlet height (mm) 1,085-1265 760-940 885-1,055 560-740
Dedusting Distance (m) 6.0 3.8
Power Supply 1PH 220V/110V 50Hz/60Hz 0.1kw
Compression Air 0.1 m3/min 0.05MPa
Vacuum 2.7 m3/min -0.014MPa
Dimension (mm) 500 X 550 X (1280-1460) 1020 X 600 X (1280-1460) 500 X 550 X (1080-1260) 1020 X 600 X (1080-1260)
Weight (kg) 70 120 65 115
Note: No additional information noted if there are any changed caused by the technical development.
COMERCIALIZADORA DE INSUMOS Y SUMINISTROS PUNICUS S.A. DE C.V.
Calle 21 de Marzo No. 21, Col. Santa Cruz Atzcapotzaltongo, Toluca, Estado de México, C.P. 50290
Tels.: +52 (722) 242 6975 y +52 (722) 242 6370 [email protected] | www.punicus.com.mx
C&C100
C&C100 / C&C100A / C&C100C
Capsule Polisher
C&C100C series Capsule Polisher has achieved double functions of capsule polishing and elevating.
Inlet of the machine can be connected with any model of capsule filling machine, and outlet with
capsule sorter and metal detector, so that to realize the production line of capsule polishing, elevating,
sorting and detecting.
Designed with up-to-date concepts and adopting several advanced technologies, the machine is
equipped with following characteristics:
Besides, with the advantages of excellent polishing performance, high production efficiency, smart
appearance and easy movement, the machine can make production more safe and standard
Double functions of capsule polishing and elevating to leave high flexibility for follow-up
equipment line;
360° circle adjustment for inlet and outlet to make production more convenient and save
factory space;
Automatically rejection of less dosage, empty, fractured and cap-body separated capsule.
Fast Dismounting to ensure safe and quick disassembly and assembly;
Parts in contact with medicine all made of 316L stainless steel or other material conforms to
modem medicine safety standards;
Detachable brush on main shaft can be thoroughly cleaned. No blind spot during whole
machine cleaning. Meet cGMP demands.
COMERCIALIZADORA DE INSUMOS Y SUMINISTROS PUNICUS S.A. DE C.V.
Calle 21 de Marzo No. 21, Col. Santa Cruz Atzcapotzaltongo, Toluca, Estado de México, C.P. 50290
Tels.: +52 (722) 242 6975 y +52 (722) 242 6370 [email protected] | www.punicus.com.mx
C&C100CDSA Online Application Sketch
Technical Parameter
Model C&C100CS C&C100CSA C&C100CS1 C&C100CSA1
Capsule Model No. 00# 0# 1# 2# 3# 4#
Max Output Capacity (pcs/h) 300,000 600,000
Inlet height (mm) 730
Outlet height (mm) 1,100 1,550 1,100 1,550
Power Supply 1PH 220V/110V 50Hz/60Hz 0.20kw
Compression Air 0.3m3/min 0.3Mpa
Vacuum 3.0 m3/min -0.01Mpa
Dimension (mm) 740 X 510 X 1500 740 X 510 X 1950 740 X 510 X 1500 740 X 510 X 1950
Weight (kg) 80 100 90 110
Note: No additional information noted if there are any changed caused by the technical development.
COMERCIALIZADORA DE INSUMOS Y SUMINISTROS PUNICUS S.A. DE C.V.
Calle 21 de Marzo No. 21, Col. Santa Cruz Atzcapotzaltongo, Toluca, Estado de México, C.P. 50290
Tels.: +52 (722) 242 6975 y +52 (722) 242 6370 [email protected] | www.punicus.com.mx
Different Combination with different
functions - Just For You
Several advanced technologies and up-to-date concept of designing.
Technical Parameter
Model C&C100CS C&C100CSA C&C100CS1 C&C100CSA1
Capsule Model No. 00# 0# 1# 2# 3# 4#
Max Output Capacity (pcs/h) 300,000 600,000
Inlet height (mm) 730
Outlet height (mm) 1,100 1,550 1,100 1,550
Power Supply 1PH 220V/110V 50Hz/60Hz 0.20kw
Compression Air 0.3m3/min 0.3Mpa
Vacuum 3.0 m3/min -0.0lMpa
Dimension (mm) 740 X 510 X 1500 740 X 510 X 1950 740 X 510 X 1500 740 X 510 X 1950
Weight (kg) 80 100 90 110
Note: No additional information noted if there are any changed caused by the technical development.
COMERCIALIZADORA DE INSUMOS Y SUMINISTROS PUNICUS S.A. DE C.V.
Calle 21 de Marzo No. 21, Col. Santa Cruz Atzcapotzaltongo, Toluca, Estado de México, C.P. 50290
Tels.: +52 (722) 242 6975 y +52 (722) 242 6370 [email protected] | www.punicus.com.mx
C&C100-1/C&C100A-1
CAPSULE POLISHER
C&C100 series capsule polishing and sorting machine is an
advanced machine with new structure. To compare it with the
traditional ones it has apparent advantage for its function and
structure. The main characters are:
Small size, good looking, adjustable height and
angles. It can be connected to any types of capsule
filling machines. Timely polishing while producing is
realized to raise the polishing quality and efficiency.
It can automatically sort out capsules with low weight,
empty body, scrap and loose piece to meet cGMP
standard.
High quality stainless steel is used inside the
medicine polishing chamber. Quick connecting parts
are also adopted to dismount the equipment more
easily and to clean more thoroughly.
Quick detachable brush and bearing are used for the
main axle. The brush and bearing can be dismounted easily. The hair of brush will not drop.
A safety device is equipped. The speed of motor is controlled by converter. The polisher can
continue to work for long time and stands moment of force
Technical Parameter
Model C&C100 / C&C100-1 C&C100A / C&C100A-1 C&C100B
Capsule Model No. 00# 0# 1# 2# 3# 4#
Max Output Capacity (pcs/h) 150,000 300,000
Power Supply 1PH 220V/110V 50Hz/60Hz 0.2kw
Compressed Air 0.25m3/min 0.3Mpa
Vacuum 2.7m3/min -0.01Mpa
Dimension (mm) 950 X 600 X (870-1000) 1150 X 600 X (870-1000) 500 X 400 X (750-1050)
Weight (kg) 35 40 15
Note: No additional information noted if there are any changed caused by the technical development.
COMERCIALIZADORA DE INSUMOS Y SUMINISTROS PUNICUS S.A. DE C.V.
Calle 21 de Marzo No. 21, Col. Santa Cruz Atzcapotzaltongo, Toluca, Estado de México, C.P. 50290
Tels.: +52 (722) 242 6975 y +52 (722) 242 6370 [email protected] | www.punicus.com.mx
New function - Main Shaft Blowing:
Blowing air with brush rolling bring
perfect capsule polishing performance to
you.
CLASSIC MODEL WITH
NEWLY DESIGN ELEMENTS
C&C100B
CAPSULE SORTER
Model C&C100B capsule sorter is used to select out the
empty capsules loose pieces as well as scraps after
capsule filling. It can also automatically select out those
capsules with lighter dosage. The machine can be
connected to the main production line. The capsules can
be polished after sorting process which is more suitable for
SR capsule dosages.