Concrete Chain Saws - Sierras de Cadena Perforadoras de Concreto

8/2/2019 Concrete Chain Saws - Sierras de Cadena Perforadoras de Concreto

1/6 1-800-700-5919 Visit our Web site at www.csunitec.com

CONCRETECHAINSAW

S

24

Concrete Chain SawsConcrete Chain Saws

Cut through walls, floors and columns in a single pass

Specifically designed for the demandingrequirements of professional sawing anddrilling contractors

Now with AirFORCE F4 Diamond chain optimized for use with pneumatic saw

Deep plunge cuts up to 15" deep

Square corners up to 14" with no overcuts

Cut mechanical openings and irregular shapes

Easily cut through reinforced concrete, brick,block, concrete pipe and natural stone

Durable industrial finish on die-cast aluminumbody stands up to harsh environments

Built-in Wallwalkerprovides leverageadvantage to makecutting easier

Optimized for pneumatic chainsawing

Model CS 536163-26.5 HP Air Motor

PneumaticHydraulic

CS Unitec Offers 2 Types of

Concrete Chain Saws to MeetYour Cutting Requirements:

CS 536163 Pneumatic High torque output for tough

cutting jobs

Powerful 6.5 HP air motor

No gas or engine fumes ideal for confined spacesand indoor use

Noise level: 88 dB at 3 feet

(approx. 1 meter) Weight: 29 lbs. (without bar and chain)

CS 526822 Hydraulic Dependable, powerful

11 HP motor

Hydraulic power for heavy-dutymining, utility, marine andconstruction applications

Weight: 25 lbs. (without bar and chain)

Please see page 26 forConcrete Chain SawAccessories, including:

Diamond ChainsGuide BarsSpeedHook

And More!

Plunge cut up to 15" deep!

AirFORCEF4

Diamond Chains

http://www.csunitec.com/spanish/concretesaws/sierra.html
http://www.csunitec.com/spanish/concretesaws/sierra.html



CS 536163-1

CS 536163-2

CS 526822-1

CS 526822-2

6.5 HP

6.5 HP

11 HP

11 HP

Power

124 CFM @ 90 PSI (6 bar)

124 CFM @ 90 PSI (6 bar)

8 GPM @ 2500 PSI (172 bar)

8 GPM @ 2500 PSI (172 bar)

32

33

28

29

104

104

95

95

88 dB

88 dB

88 dB

88 dB

Motor Specifications

5700 RPM

5700 RPM

5700 RPM

5700 RPM

No LoadSpeed

Weight w/Bar andChain

No LoadTorque(in.-lbs.)

NoiseLevelat 3 ft.

10"

15"

10"

15"

Max.Depthof Cut

Model No.

Concrete Chain SawsConcrete Chain Saws

Rugged construction for demanding applications

Pneumatic Concrete Chain Saw

Hydraulic Concrete Chain Saw

Above: OptionalSpeedHookguidessaw for straightcutting (see page 26).

Model CS 52682211 HP Hydraulic Motor

FORCE F4Diamond Chains


3/6

ECO50-T and ECO50-TAKElectric and Hydraulic

Reversible motor for drilling and tapping applicationsCutter

capacity2" dia.

CONCRETECHAINSAW

ACCESSORIES

26 1-800-700-5919 Visit our Web site at www.csunitec.com

AirFORCE Standard

General-purposeDiamond Chain10" Part No. 53616615" Part No. 536167

AirFORCE AbrasivePRO

For cutting soft,abrasive material10" Part No. 53174715" Part No. 525344

Concrete Chain Saw AccessoriesConcrete Chain Saw Accessories

Make your concrete chain saw work for you

1.

Three options for cutting

Guide BarsGuide Barswith internal water feed10" Guide BarPart No. 529829

10" cutting capacity

9" depth of square cut

Accommodates a 25segment Diamond Chain

15" Guide BarPart No. 523080

15" cutting capacity

14" depth of square cut

Accommodates a 29

segment Diamond Chain

AirFORCE Premium

For cutting concretewith steel reinforcement10" Part No. 53616415" Part No. 536165

10" chain has 25 segments for 10" max.cutting depth, 9" square corners

15" chain has 29 segments for 15" max.cutting depth, 14" square corners

Match the Diamond Chain tothe material or application:

2. 3.

SpeedHookSpeedHook

Guides the saw for straight cuts

SpeedHookComplete KitPart No. CS 70552

(includes SpeedHook

42" rail,1 saw adapter and 1 axle)

Quickly and easily attachesto wall with anchors

Guides saw for straight cuttingthrough reinforced concrete,brick, block and natural stone

Note: Reduces cutting depthby 3"

AirFORCEF4Diamond Chains


4/6

ECO32-T and ECO32-TAKECO32-T and ECO32-TAK

Reversible motor for drilling and tapping applicationsCutter

capacity11/4" dia.

1-800-700-5919 Visit our Web site at www.csunitec.com

Maximize Diamond Chain life with these hints

The cutting life of the chains is not guaranteed. There aremany variables from job to job, including hardness of concrete,which make it impossible to accurately predict chain life.*These numbers are rough, starting point estimates only, notfor bidding purposes. Please refer to Operator's Manual forproper safety precautions.

Concrete Diamond Chain LifeConcrete Diamond Chain Life

Factors negatively affecting chain life: Steel reinforcing many pieces of large diameter rebar cause reduced life Aggregate hardness harder aggregates cause reduced life Operator experience first-time users generally get less chain life

Cutting tips to improve chain life: Use minimum of 20 PSI water pressure Always cut at full throttle slowly plunge into wall

and push hard enough to cause the RPMs to drop by 25% to 30% Always apply steadyfeed force Slowlyrock the bar and chain into the cut using Wallwalker

as a pry point Reduce arm motions hold saw close to body, using legs and body to apply

feed force; always cut with saw between shoulders and knees, preferably at waist height If saw begins to drift off the intended cut line, pull out and restart cut

Estimated chain life for AirFORCE Premium 29 segment chain (Part No.CS 536164-15) is approximately 600 in.-ft. in concrete with up to5/8" rebar.

Wall Thickness6 inches

8 inches

10 inches

Lineal feet in common wall thickness*:

Lineal Cutting Feet100 feet

75 feet

60 feet

8"

7'

3'

How to calculate inch-foot (in.-ft.)An inch-foot (in.-ft.) is equal to the Depth of Cut

in inches x Length of Cut in feet.This measurementis used to determine chain or blade life.

For example:Calculate how many in.-ft. are in this doorway.

1. Determine the Depth of Cut in inches.For this example, it is 8 inches.

2. Determine the Length of Cut in feet.3 + 7 + 3 + 7 = 20 feet.

3. Multiply the two numbers.8 in. x 20 ft. = 160 in.-ft.

Note for metric users: 1cm = .3937 inches and 1 meter = 3.2808 ft.

Removes moisture and dirt from air lines; a float valveautomatically ejects water and dirt

Includes automatic oiler; prevents tools from freezing incold environments

Eliminates air motor downtime caused by water and dirt

Connections for two tools, max. air flow 185 CFM

AirPacAirPacExtends life of pneumatic power tools see page 29 for more information

Model CSAP-2


5/6

PNEUMATIC

CUT-OFFSAW

S

28 1-800-700-5919 Visit our Web site at www.csunitec.com

Pneumatic Cut-off SawsPneumatic Cut-off Saws -Hand-held and Walk-behind

Cut concrete, asphalt, masonry, steel and more

Hand-held Cut-off Saws, 14" and 18" Wet or dry cutting of concrete, reinforced

concrete, asphalt, masonry, steel and more

Cut up to 7" deep with no gas or engine fumes

Low maintenance no belts, pistons, fuel linesor carburetors

Accept diamond or abrasive blades

Adjustable blade guard with built-in water connection

In-line oiler for motor lubrication

1" arbor size, 1/2" NPT air connection

Walk-behind Cut-off Saw 20" Capacity Wet or dry cutting of concrete, asphalt

and other materials

Cut up to 7" deep with no gas or engine fumes

Low maintenance no belts, pistons,fuel lines or carburetors

Designed for tough cutting jobs, including jointsawing, floor sawing, trenching, road repair andplant maintenance

9.5 HP pneumatic motor with gearbox drive

Rugged steel construction yet only 107 lbs.

Built-in water connection for wet cutting

Built-in oiler for motor lubrication Optional water tank kit

Power

RPM (No Load)

Max. Depth of Cut

Max. Blade Capacity

CFM @100 PSI

Drive

Weight

9.5 HP

2900

7"

20"

92

Gearbox

107 lbs.

Model CSR 150

Cut-off Saw with12" abrasive blade

14" Cut-off Saw with diamond blade

Built-in3/4" waterconnection

1/2" NPT AirConnection(works on

both left andright side)

Adjustable crank handleto raise andlower blade

High-torqueoutput gear box

3/4" WaterConnection

1" arborWeighs 107 lbs.

Pointer

CSH 100

CSH 125

CSH 150

5 HP

9.5 HP

9.5 HP

Power

5250

3200

3200

RPM(No Load)

Max.Depthof Cut

4"

5"

7"

90

92

92

Direct

Gearbox

Gearbox

CFM @100 PSI

14

14

18

Max.Blade

Capacity

22

26

28

DriveWeight(lbs.)

ModelNo.



AirPacAirPac

Air Tool LubricantAir Tool LubricantNon-toxic

Removes 98% of water andcontaminants from both portableand stationary compressed airsystems to protect pneumatic tools

Totally automatic a float valveautomatically ejects theaccumulated water and dirt

Maintenance-free no filters orparts to replace or service

Includes automatic 1/2 pint oiler;prevents tools from freezing in coldenvironments

Two tool outlets; Chicagocouplings on all connections

Weighs 40 lbs., max. air 185 CFM

Use Air Tool Lubricant for bestresults see below for moreinformation

How it Works:

Air compressors compress air into smallareas this causes heat, which containsmoisture

As heated air travels through air lines, itcools, creating water droplets

When this air/water mixture enters theAirPac, it travels through a baffle that trapsthe water and dirt and drops it into aholding area

When enough water is accumulated, a floatallows the water and dirt to beautomatically ejected

Dry air then enters the lubricator and ismixed with oil and sent to the tool

CS Unitec offers three types:

ProLube-ATL: A super-premiumsynthetic air tool lubricant. Providesmaximum lubrication, cleaning andprotection for portable air tools.

ProLube-ATL/AF (anti-freeze):ProLube-ATL/AF blend that preventsfreezing and is ideal for operating airtools in cold climate conditions.

Air Tool Line Conditioner:For use in underwater air tools.Displaces moisture. Developed toinhibit rust and corrosion of air motors.

Extends life of pneumatic power tools

ProLube-ATL

1 gallon bottleOrder No.

CS 7043-001

Case (4 bottles)Order No.

CS 7043-002

1 gallon bottleOrder No.CS 7049-001

Case (4 bottles)Order No.CS 7049-002

ProLube-ATL/AF

1 quart/liter bottleOrder No.MS 9105

Air Tool Line Conditioner

Model CSAP-2

Documents

Concrete Chain Saws - Sierras de Cadena Perforadoras de Concreto