5/23/2018 Configuracion Basica H3C WA2620_AGN.pdf

1/2

Finding the IP Address on Networks Without a DHCPServer (FAT AP)

If your network does not have a DHCP server, the AP uses a default factory configurationwhich includes the following information.

Configure the IP address of the AP as 192.168.0.50.

Configure the AP to enable the Telnet server function (the default authentication

username isadmin,

password ish3capadmin,

case sensitive). You can remotely manage and maintain the AP through Telnet.

Configure the AP to enable open-system authentication mode, with the

5/23/2018 Configuracion Basica H3C WA2620_AGN.pdf

2/2