CPFC 08 0002
Removes rust, oil-based coatings, organic debris
Passivates steel surfaces
Non-corrosive to base metal
Safe in multimetal systems
DESCRIPTION AND USE
FERROQUEST FQ7103 is a neutral pH cleanerwhich removes iron
deposits, oil-based coatings, andorganic debris from metal
surfaces. Use of FERRO-QUEST FQ7103 in new systems establishes
systemcleanliness and protection as the first step towardprocess
efficiency and equipment longevity.
TREATMENT AND FEEDING REQUIREMENTS
Recirculate a 1% FERROQUEST FQ7103 solutionthroughout the system
for a minimum of 72 hours.After cleanout, rinse for 24 hours with
fresh water,drain, and initiate system treatment. FERROQUESTFQ7103
is best fed neat (undiluted) from the storagetank into the system.
It can be introduced to the sys-tem by means of a chemical pump,
bypass feeder oran inductor feeder.
FERROQUEST FQ7103Neutral pH Iron Cleaner
GENERAL PROPERTIES
Physical properties of FERROQUEST FQ7103 areshown on the
Material Safety Data Sheet, a copy of
which is available upon request.
PACKAGING INFORMATION
FERROQUEST FQ7103 is a liquid blend available in
a variety of containers and delivery methods. Contactyour
BetzDearborn representative for details.
STORAGE
Protect from freezing. If this product is frozen during
shipment or storage, slight mixing may be required to
ensure homogeneity.
SAFETY PRECAUTIONS
A Material Safety Data Sheet containing detailed
information about this product is available uponrequest.
2000, BetzDearborn - A Division of Hercules Canada.All rights
reserved.
