6
M series Kawasaki Robot M series Extra large payload robots up to 1,500 kg Cat. No. 3L1944 Feb. ’19 S Printed in Japan Kawasaki Robot ] Materials and specifications are subject to change without notice. CAUTIONS TO BE TAKEN TO ENSURE SAFETY lFor those persons involved with the operation / service of your system, including Kawasaki Robot, they must strictly observe all safety regulations at all times. They should carefully read the Manuals and other related safety documents. lProducts described in this catalogue are general industrial robots. Therefore, if a customer wishes to use the Robot for special purposes, which might endanger operators or if the Robot has any problems, please contact us. We will be pleased to help you. lBe careful as Photographs illustrated in this catalogue are frequently taken after removing safety fences and other safety devices stipulated in the safety regulations from the Robot operation system. Robot Business Division Tokyo Head Office/Robot Division 1-14-5, Kaigan, Minato-ku, Tokyo 105-8315, Japan Phone: +81-3-3435-2501 Fax: +81-3-3437-9880 Akashi Works/Robot Division 1-1, Kawasaki-cho, Akashi, Hyogo 673-8666, Japan Phone: +81-78-921-2946 Fax: +81-78-923-6548 Global Network Kawasaki Robotics (USA), Inc. 28140 Lakeview Drive, Wixom, MI 48393, U.S.A. Phone: +1-248-446-4100 Fax: +1-248-446-4200 Kawasaki Robotics (UK) Ltd. Unit 4 Easter Court, Europa Boulevard, Westbrook Warrington Cheshire, WA5 7ZB, United Kingdom Phone: +44-1925-71-3000 Fax: +44-1925-71-3001 Kawasaki Robotics GmbH Im Taubental 32, 41468 Neuss, Germany Phone: +49-2131-34260 Fax: +49-2131-3426-22 Kawasaki Robotics Korea, Ltd. 43, Namdong-daero 215beon-gil, Namdong-gu, Incheon, 21633, Korea Phone: +82-32-821-6941 Fax: +82-32-821-6947 Kawasaki Robotics (Tianjin) Co., Ltd. 1·2/F, Building 6, No.19 Xinhuan Road, TEDA, China Phone: +86-22-5983-1888 Fax: +86-22-5983-1889 Kawasaki Motors Enterprise (Thailand) Co., Ltd. (Rayong Robot Center) 119/10 Moo 4 T.Pluak Daeng, A.Pluak Daeng, Rayong 21140 Thailand Phone: +66-38-955-040-58 Fax: +66-38-955-145 https://robotics.kawasaki.com/ ISO certified in Akashi Works and Nishi-Kobe Works.

Kawasaki Robot M series...JT 2: 15 481 623 1, 16 0 325 3, 07 9 1, 24 0 3,503 1,497 2,006 P 50 01 00 10 0 77 0 135 770 1001 500 00 12 5 125 37 0 30 0 30 0 300 28 4, 31 9 1,1002 50 2,

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Kawasaki Robot M series...JT 2: 15 481 623 1, 16 0 325 3, 07 9 1, 24 0 3,503 1,497 2,006 P 50 01 00 10 0 77 0 135 770 1001 500 00 12 5 125 37 0 30 0 30 0 300 28 4, 31 9 1,1002 50 2,

M seriesKawasaki Robot

M series

Extra large payload robots up to 1,500 kg

Cat. No. 3L1944 Feb. ’19 S

Printed in Japan

Kawasaki Robot

] Materials and specifications are subject to change without notice.

CAUTIONS TO BE TAKEN TO ENSURE SAFETY

lFor those persons involved with the operation / service of your system, including Kawasaki Robot, they must strictly observe all safety regulations at all times. They should carefully read the Manuals and other related safety documents.

lProducts described in this catalogue are general industrial robots. Therefore, if a customer wishes to use the Robot for special purposes, which might endanger operators or if the Robot has any problems, please contact us. We will be pleased to help you.

lBe careful as Photographs illustrated in this catalogue are frequently taken after removing safety fences and other safety devices stipulated in the safety regulations from the Robot operation system.

Robot Business Division

Tokyo Head Office/Robot Division1-14-5, Kaigan, Minato-ku, Tokyo 105-8315, JapanPhone: +81-3-3435-2501 Fax: +81-3-3437-9880

Akashi Works/Robot Division1-1, Kawasaki-cho, Akashi, Hyogo 673-8666, JapanPhone: +81-78-921-2946 Fax: +81-78-923-6548

Global Network

Kawasaki Robotics (USA), Inc.28140 Lakeview Drive, Wixom, MI 48393, U.S.A.Phone: +1-248-446-4100 Fax: +1-248-446-4200

Kawasaki Robotics (UK) Ltd.Unit 4 Easter Court, Europa Boulevard, Westbrook Warrington Cheshire, WA5 7ZB, United KingdomPhone: +44-1925-71-3000 Fax: +44-1925-71-3001

Kawasaki Robotics GmbHIm Taubental 32, 41468 Neuss, GermanyPhone: +49-2131-34260 Fax: +49-2131-3426-22

Kawasaki Robotics Korea, Ltd.43, Namdong-daero 215beon-gil, Namdong-gu, Incheon, 21633, KoreaPhone: +82-32-821-6941 Fax: +82-32-821-6947

Kawasaki Robotics (Tianjin) Co., Ltd.1·2/F, Building 6, No.19 Xinhuan Road, TEDA, China Phone: +86-22-5983-1888 Fax: +86-22-5983-1889

Kawasaki Motors Enterprise (Thailand) Co., Ltd.(Rayong Robot Center)119/10 Moo 4 T.Pluak Daeng, A.Pluak Daeng, Rayong 21140 Thailand Phone: +66-38-955-040-58 Fax: +66-38-955-145

https://robotics.kawasaki.com/ISO certified in Akashi Works and Nishi-Kobe Works.

Page 2: Kawasaki Robot M series...JT 2: 15 481 623 1, 16 0 325 3, 07 9 1, 24 0 3,503 1,497 2,006 P 50 01 00 10 0 77 0 135 770 1001 500 00 12 5 125 37 0 30 0 30 0 300 28 4, 31 9 1,1002 50 2,

The “M series” – this powerful robot developed by Kawasaki Heavy Industries, a pioneer of industrial robot manufacture, has a maximum payload of 1,500 kg. Its superior design gives it the power to lift and manipulate heavy loads with great ease and high accuracy. Kawasaki’s own mechanism makes the waist more compact and allows it to support a larger payload capacity.

Maximum payload 1,500 kgIncorporating a compact profile design with long reach and high wrist torque

MX700NMX420LMX350L MX500N MT400N MG10HL MG15HL

FeaturesCompact profileThe MX adopts a new link structure for the JT3 (upper and lower arms), while the MG adopts Kawasaki’s own hybrid link mechanism and ball screws for the JT3. Two large motors to drive them make the counterweight unnecessary and the robot’s waist compact.

High wrist torqueThe MG15HL have superb wrist torque. This torque increases the offset distance from the twist flange surface to the center of gravity of a workpiece. Its application offers excellent results when working with off-centered workpieces.

High rigidityThe second and third axes that affect the accuracy of hand motions use highly rigid ball screws with minimal backlash. This reduces arm deflection while enabling high positioning accuracy. (MG)

Wide motion rangeKawasaki’s original hybrid link mechanism along with the ball screws used in the second and third axes ensures a wide work envelope when the arm moves forward. (MG)

Many variationsFour MX models (6-axis type, 350 - 700 kg) and two MG models (6-axis type, 1,000 - 1,500 kg) are floor mounting types. The MT400N (6-axis, 400kg) is a shelf mounting type. These models are for assembling and handling applications.

1 2

Page 3: Kawasaki Robot M series...JT 2: 15 481 623 1, 16 0 325 3, 07 9 1, 24 0 3,503 1,497 2,006 P 50 01 00 10 0 77 0 135 770 1001 500 00 12 5 125 37 0 30 0 30 0 300 28 4, 31 9 1,1002 50 2,

MX350L MX420L MX500N MX700N

Type Articulated robot

Degree of freedom (axes) 6

Payload (kg) 350 420 500 700

Max. reach (mm) 3,018 2,778 2,540 2,540

Position repeatability (mm) ]1 ±0.1 (at the tool mounting surface)

Motionrange(°)

Arm rotation (JT1) ±180 ±180 ±180 ±180

Arm out-in (JT2) +90 - −45 +90 - −45 +90 - −45 +90 - −45

Arm down-up (JT3) +20 - −115 +20 - −125 +20 - −130 +20 - −130

Wrist swivel (JT4) ±360 ±360 ±360 ±360

Wrist bend (JT5) ±110 ±110 ±110 ±110

Wrist twist (JT6) ±360 ±360 ±360 ±360

Max. speed(°/s)

Arm rotation (JT1) 80 80 80 65

Arm out-in (JT2) 70 70 70 50

Arm down-up (JT3) 70 70 70 45

Wrist swivel (JT4) 80 80 80 50

Wrist bend (JT5) 80 80 80 50

Wrist twist (JT6) 120 120 120 95

Allowable moment(N·m)

Wrist swivel (JT4) 2,740 3,290 3,920 5,488

Wrist bend (JT5) 2,740 3,290 3,920 5,488

Wrist twist (JT6) 1,960 1,960 1,960 2,744

Allowable moment of inertia(kg·m2)

Wrist swivel (JT4) 400 400 400 600

Wrist bend (JT5) 400 400 400 600

Wrist twist (JT6) 250 250 250 388

Mass (kg) 2,800 2,800 2,750 2,860

Mounting Floor

Installation environment

Ambient temperature (°C) 0 - 45

Relative humidity (%) 35 - 85 (No dew, nor frost allowed)

Option

Adjustable mechanical stopper JT1/JT2/JT3Limit switch JT1/JT2/JT3 Internal signal harness

Double solenoid valve (3 circuit/2 circuit)F.R.L. combination (Air cleaning equipment)

Controller/Power requirements E04/12kVA

]1: conforms to ISO9283

MT400N MG10HL MG15HL

Type Articulated robot

Degree of freedom (axes) 6

Payload (kg) 400 1,000 1,500

Max. reach (mm) 3,503 4,005 4,005

Position repeatability (mm) ]1 ±0.1 (at the tool mounting surface)

Motionrange(°)

Arm rotation (JT1) ±180 ±150 ±150

Arm out-in (JT2) +15 - −135 +90 - −40 +90 - −40

Arm down-up (JT3) +106 - −30 +30 - −110 +30- −110 ]2

Wrist swivel (JT4) ±360 ±360 ±360

Wrist bend (JT5) ±120 ±120 ±120

Wrist twist (JT6) ±360 ±360 ±360

Max. speed(°/s)

Arm rotation (JT1) 80 65 65

Arm out-in (JT2) 70 33.5 33.5

Arm down-up (JT3) 70 37.5 37.5

Wrist swivel (JT4) 70 65 36

Wrist bend (JT5) 70 65 36

Wrist twist (JT6) 130 80 80

Allowable moment(N·m)

Wrist swivel (JT4) 2,150 8,800 15,000

Wrist bend (JT5) 2,150 8,800 15,000

Wrist twist (JT6) 980 4,410 4,410

Allowable moment of inertia(kg·m2)

Wrist swivel (JT4) 200 1,800 2,250

Wrist bend (JT5) 200 1,800 2,250

Wrist twist (JT6) 147 1,200 1,200

Mass (kg) 2,600 6,500 6,550

Mounting Shelf Floor

Installation environment

Ambient temperature (°C) 0 - 45

Relative humidity (%) 35 - 85 (No dew, nor frost allowed)

OptionAdjustable mechanical stopper JT1/

JT2/JT3Limit switch JT1/JT2/JT3

Adjustable mechanical stopper JT1Limit switch JT1/JT2/JT3 Internal signal harness

Double solenoid valve (3 circuit/2 circuit)F.R.L. combination (Air cleaning equipment)

Controller/Power requirements E02/7.5kVA E58/15kVA

]1: conforms to ISO9283 ]2: The maximum ranges of motion depend on the payload and the torque.

Standard specifications

3 4

Page 4: Kawasaki Robot M series...JT 2: 15 481 623 1, 16 0 325 3, 07 9 1, 24 0 3,503 1,497 2,006 P 50 01 00 10 0 77 0 135 770 1001 500 00 12 5 125 37 0 30 0 30 0 300 28 4, 31 9 1,1002 50 2,

(mm)

JT2:135°

JT3:106°

JT3:30°

JT1:180°

JT1:180°

A

JT2:15°

481 623

1,1

60

325

3,0

79

1,2

40

3,503

2,0061,497

P

50

010

010

07

70

770135500100 100

12

5

125

37

0 30

03

00

300

28

4,3

19

1,100 250

2,1

00

231

R659

X

XX

Y

Y

30

°

30°

JT4:±360°

JT6:±360°

JT5:±120°

8-ø22

8-ø22ø0.05

2-ø25G8

2-ø10H7 Depth 12

ø16

0

ø200

ø0.15

ø0.04

6-M10 Depth 12

ø100H7

Depth 8

VIEW AWorking rangebased on point P

623

(856)

481

1,100325

2,045495

310

2,5

10

25

01,

100

1,16

0

JT3:20°

2,8

39

32

R659(R865)

ø250

X

Y

JT1:180°

JT5:±110°

JT6:±360°JT4:±360°

JT1:180°

0+0.040

ø125H7

6–M12

0+0.018

2–ø12H7

(mm)

JT3:130°

JT2:90°

JT2:45°

A

Xø0.04

YXø0.2

60°

30°

ø200

✻ Figures in ( ) represent MX700N.

50

010

010

07

70

770135500100 100

12

5

125

37

0 30

03

00

300

28

8-ø22

8-ø22ø0.05

2-ø25G8

P

Interference radius around the rotational axis

Depth 8.5

Depth 29

Depth 12

VIEW A

Working rangebased on point P

2,048730

213

1,350325 310

2,5

10

25

01,

100

1,16

0

JT3:125°

R659

ø250

X

Y

3,1

69.6

0+0.040

6–M12

0+0.018

2–ø12H7

(mm)

JT6:±360°

JT5:±110°

JT1:180°

JT1:180°

JT2:45° JT2:

90°

JT3:20°

JT4:±360°

A

ø125H7

Xø0.04

YXø0.2

60°

30°

ø200

623481

50

010

010

07

70

770135500100 100

12

5

125

37

0 30

03

00

300

28

8-ø22

8-ø22ø0.05

2-ø25G8

P

Interference radius around the rotational axis

Depth 8.5Depth 29

Depth 12

VIEW A

Working rangebased on point P

2,053965

3,5

02

45

9325

2,5

10

1,10

01,

16

0R659

0+0.040

6–M12

ø250

0+0.018

2–ø12H7

X

Y

1,600 310

25

0

(mm)

JT6:±360°

JT5:±110°

JT1:180°

JT1:180°

JT2:90°

JT3:115°

JT2:45°

JT3:20°

JT4:±360°

A

ø125H7

Xø0.04

YXø0.2

60°

30°

ø200

623481

50

010

010

07

70

770135500100 100

12

5

125

37

0 30

03

00

300

28

8-ø22

8-ø22ø0.05

2-ø25G8

P

Interference radius around the rotational axis

Depth 8.5

Depth 29

Depth 12

VIEW A

Working rangebased on point P

Motion range & dimensions

MX350L MX500N / 700N

MX420L MT400N

5 6

Page 5: Kawasaki Robot M series...JT 2: 15 481 623 1, 16 0 325 3, 07 9 1, 24 0 3,503 1,497 2,006 P 50 01 00 10 0 77 0 135 770 1001 500 00 12 5 125 37 0 30 0 30 0 300 28 4, 31 9 1,1002 50 2,

(mm)

Y

ø0.3 X

X

Xø0.06Y

ø315

20°

20°16-M16 Dp34

2-ø12H7 Dp20

ø33

30ø48

ø135H7Dp10

ø0.06

Installation Dimensions

42

5 80

60

42

5 80

60

425 80 604258060

505

50

5

1,0

10

2-ø25G8

16-ø33

1,2

00

730 600

A

JT1

JT1

JT4±360°

JT6±360°

JT5±120°

JT2

JT3

JT2

JT3

150°

150°

90°

40°

30°

110°

VIEW A

95

01

,40

02

50

40

0

600 210 1,750 435

1,057

1,036674674

3,5

33

1,957

R1,957

400 490

1,226 2,779

4,005

1,2425

95

4,4

16

3,8

21

Point P

Working rangebased on point P

Con�gurations of MG15HL upper arm

E seriesThe E-Controller, with unprecedented quality and compact size, was created in response to customer demand.Kawasaki’s collaboration of past achievements and experience has lead to the development of the most technically advanced controller available. This industry leading design provides increased performance and easy operation that exceeds expectations.

Motion range & dimensions

MG10HL / MG15HL

Controller

E02/E04

]Option

FeaturesCompactSmall footprint of the E controller makes it easy to achieve high-density layouts. And overall volume has been reduced greatly compared with the previous model. As a result, an upright-position installation or stacked installation is possible, in order to save installation space.

User-friendly operation systemThe operation system has now fully developed into a more user-friendly design. The operator can turn on the motors and activate the cycle start all from the teach pendant, thereby realizing a more convenient system control. The two information screens can be displayed simultaneously, enabling the operator to view different types of information easily (for example, positional and signal information).

Abundance of functionsThe large variety of unique functions makes it possible to support a wide range of applications. These functions can be combined and easily configured within a system to suit a particular application. Likewise, the built-in Kawasaki “AS Language” provides sophisticated robot motion and sequence controls.

Incorporating the latest technologiesThe enhanced CPU capacity allows for more accurate trajectory control, faster program execution, and quicker saving and loading of files, and countless other advantages. In addition, the memory has been expanded to answer the need for higher program storage capacity. A USB port is equipped as a external storage conduit.

Easier maintenanceWith modular components and fewer cables, Kawasaki has developed a controller that is compact and easy to maintain. A host of maintenance functions are available, including the DIAG function for self-diagnostics, a maintenance support function that can handle not only hardware errors but also application errors. In addition to the DIAG function, there are other additional functions, such as a Web server that enables engineers to perform remote diagnostics.

Highly expandableWith the use of additional amplifiers and multi axis controller, the E04 controller can support up to 16 external axes, and the E58 up to 17.Numerous communication fieldbuses can be used to control peripheral devices. Advanced systems can easily be built by using Kawasaki K-Logic sequencer software and the user-customized interface panel on the teach

pendant.

Global Unified SpecificationThe E04 is a universal controller equipped with an optional transformer unit to cope with different primary power sources worldwide.

E58

7 8

Page 6: Kawasaki Robot M series...JT 2: 15 481 623 1, 16 0 325 3, 07 9 1, 24 0 3,503 1,497 2,006 P 50 01 00 10 0 77 0 135 770 1001 500 00 12 5 125 37 0 30 0 30 0 300 28 4, 31 9 1,1002 50 2,

USB

RS-232C

DIO board

External-axis motor

Standard

Option

Optional board

Optional device

Ethernet

DeviceNet board, master/slave

CC-Link board, master/slave

PROFIBUS board, master/slave

PROFINET board, master/slave

Ethernet/IP board, master/slave

CANopen board, slave

EtherCAT board, master/slave

Cubic-S (area monitor/speed monitor)

Conveyor I/F board

Fast checkmode switch

Teach pendant

Terminal software

Terminal software

Vision controller

USB Memory

Brake release switch

DIO board: 32 points eachmax. 4 boards (128 points)

MG+E58

Transformer

USB

RS-232C

DIO board

External-axis motor

Standard

Option

Optional board

Optional device

Ethernet

DeviceNet board, master/slave

CC-Link board, master/slave

PROFIBUS board, master/slave

PROFINET board, master/slave

Ethernet/IP board, master/slave

CANopen board, slave

EtherCAT board, master/slave

Cubic-S (area monitor/speed monitor)

Conveyor I/F board

Fast checkmode switch

Transformer unit

Teach pendant

Terminal software

Terminal software

Vision controller

USB Memory

Brake release switch

DIO board: 32 points eachmax. 3 boards (96 points)

MX+E04, MT+E02

Large, color LCD touch screen display.

The key arrangement has been optimised through extensive studies of operator hand movements.

Equipped with Enable switches.

POWER

26

01

81

81

70

580 550

580 550

550 550225

1,3

70

1,0

05

StandardOption

E02/E04 E58

Dimensions (mm) W550×D580×H278 W775×D550×H1,370 E02/E04: Transformer unit: W580×D580×H178

Construction Enclosed structure / Indirect cooling system —

Controlled axes 6 9E02/E04: Max. 16 (adding external amplifier)E58: Max. 17 (adding external amplifier)

Memory capacity (MB) 8 —

I/O signals

External operation Motor power off, Hold —

Input (Channels) 32 E02/E04: Max. 96 E58: Max. 128

Output (Channels) 32 E02/E04: Max. 96 E58: Max. 128

Cablelength

Teach pendant (m) 5 10, 15

Robot-controller (m) 5 10, 15

Mass (kg) 40 165E02/E04: Transformer unit: 45E58: When built-in transformer: 215

Power requirements

AC200-220V ±10%, 50/60Hz, 3øE02: Max.7.5kVA E04: Max.12kVA

AC200-220V ±10%, 50/60Hz, 3øMax. 15kVA

(E02/E04)]When using transformer unitAC380-415V ±10% (selectable)AC440-480V ±10% ] 50/60Hz, 3ø(E58)]When built-in transformerAC380-415V ±10% (selectable)AC440-480V ±10% ] 50/60Hz, 3ø

Class-D earth connection (Earth connection dedicated to robots), leakage current: Maximum 100mA

Installation environment

Ambient temperature (°C) 0 - 45 —

Relative humidity (%) 35 - 85 (no dew, nor frost allowed) —

Teach pendantColor LCD display with touch-panel, E-Stop switch,

teach lock switch, Enable switch—

Operation panel Teach/repeat SW, Emergency stop SW, Control power lamp

External memory — USB Memory

External interface USB, Ethernet (100BASE-TX), RS-232C —

Controller

System configuration diagram

Specifications

External view & dimensions

Teach pendant

]Option

E02/E04 E58

(mm)

Transformer unit ]

(mm)

9 10