Manual de Teatro en Casa Nuevo Panasonic

VQT3X49-3

Owner’s ManualBlu-ray DiscTM Home Theater Sound System

Model No. SC-BTT490

Thank you for purchasing this product.For optimum performance and safety, please read these instructions carefully.Please keep this manual for future reference.

If you have any questions, contact:U.S.A. and Puerto Rico : 1-800-211-PANA(7262)Canada : 1-800-561-5505

Unless otherwise indicated, illustrations in this Owner’s Manual are of SC-BTT490 for U.S.A.

until 2012/03/07

P PC PX

SC-BTT490P_eng.book 1 ページ２０１２年２月２２日　水曜日　午前９時１分

2 VQT3X49

Getting started

IMPORTANT SAFETY INSTRUCTIONSRead these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference.1 Read these instructions.2 Keep these instructions.3 Heed all warnings.4 Follow all instructions.5 Do not use this apparatus near water.6 Clean only with dry cloth.7 Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.8 Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the manufacturer.

12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or when unused for long periods of time.

14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

UnitTo reduce the risk of fire, electric shock or product damage,≥ Do not expose this unit to rain, moisture, dripping or splashing.≥ Do not place objects filled with liquids, such as vases, on this

unit.≥ Use only the recommended accessories.≥ Do not remove covers.≥ Do not repair this unit by yourself. Refer servicing to qualified

service personnel.

AC power supply cord≥ Install this unit so that the power cord can be unplugged from

the socket outlet immediately if any problem occurs.

Small object≥ Keep the Memory Card out of reach of children to prevent

swallowing.≥ Keep the screws out of reach of children to prevent swallowing.

Unit≥ This unit utilizes a laser. Use of controls or adjustments or

performance of procedures other than those specified herein may result in hazardous radiation exposure.

≥ Do not place sources of naked flames, such as lighted candles, on this unit.

PlacementTo reduce the risk of fire, electric shock or product damage,≥ Do not install or place this unit in a bookcase, built-in cabinet or

in another confined space. Ensure this unit is well ventilated.≥ Do not obstruct this unit’s ventilation openings with

newspapers, tablecloths, curtains, and similar items.

Speaker≥ Use only supplied speakers

The main unit and supplied speakers are to be used only as indicated in this Owner’s Manual. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.

≥ Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the speakers.

≥ Do not hold the speaker in one hand to avoid injury by dropping the speaker when carrying.

≥ You can damage your speakers and shorten their useful life if you play sound at high levels over extended periods.

≥ Do not touch the front netted area of the speakers. Hold by the sides.

≥ When carrying speakers, hold the stand and base parts.≥ Place speakers on flat, secure surfaces.≥ To avoid injury by falling or dropping the speaker, place the

speaker cables with care not to stumble or hook.≥ Do not stand on the base for the speaker. Be cautious when

children are near.

BatteriesMishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.≥ Danger of explosion if battery is incorrectly replaced. Replace

only with the type recommended by the manufacturer.≥ When disposing the batteries, please contact your local

authorities or dealer and ask for the correct method of disposal.≥ Do not mix old and new batteries or different types at the same time.≥ Do not heat or expose to flame.≥ Do not leave the battery(ies) in a car exposed to direct sunlight

for a long period of time with doors and windows closed.≥ Do not take apart or short circuit.≥ Do not attempt to recharge alkaline or manganese batteries.≥ Do not use batteries if the covering has been peeled off.Remove batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

(Inside of product)

WARNING

CAUTION


Get

ting

star

ted

TV &

Rad

ioPl

ayba

ckR

efer

ence

Adva

nced

op

erat

ions

VQT3X49 3

Table of contentsIMPORTANT SAFETY INSTRUCTIONS ........ 2

Getting started

Package contents and accessories ................ 4Unit and media care ........................................ 5Playable media ............................................... 6Control reference guide .................................. 8STEP 1: Positioning ...................................... 10STEP 2: Preparing the speakers .................. 11STEP 3: Connections .................................... 13STEP 4: Connecting to an AC power source .... 17STEP 5: Settings ........................................... 18

•Easy Setting ......................................................... 18•Easy Network Setting ........................................... 18•Firmware updates ................................................ 19

Inserting or removing media ......................... 20Enjoying TV with unit’s speakers .................. 20HOME menu ................................................. 21Multi User Mode ............................................ 22

Playback

Playback ....................................................... 23Using the iPod/iPhone .................................. 25

•iPod/iPhone Connection ....................................... 26•iPod/iPhone Playback .......................................... 26

TV & Radio

VIERA LinkTM

“HDAVI ControlTM” ..........................................27•Enjoying TV and STB with unit’s speakers .......... 28

Listening to the Radio .................................... 29

Advanced operations

Enjoying Network Service(NETFLIX, etc.) ..............................................30Home Network feature ...................................31Option menu ..................................................32Setup menu ...................................................35

•Speaker settings .................................................. 40Enjoying sound effects from all speakers ......41Speaker installation option .............................42

Reference

Troubleshooting guide ...................................44Messages ......................................................47Specifications .................................................49Supplemental information ..............................50Limited Warranty ............................................54Index ................................................Back cover

≥ Please note that the actual controls and components, menu items, etc. may look somewhat different from those shown in the illustrations in this Owner's Manual.

Precautions of Wireless LAN connectionThe following limits are in place regarding the usage of this unit. You must be aware of these limits before using this unit.Panasonic will in no way be responsible for any incidental damage which may arise due to a failure to obey these limits, or to any condition of use or disuse of this unit.≥ Data transmitted and received over radio waves may be intercepted and monitored.≥ This unit contains delicate electronic components.

Please use this unit in the manner in which it was intended and follow the following points:jDo not expose this unit to high temperatures or direct sunlight.jDo not bend, or subject this unit to strong impacts.jKeep this unit away from moisture.jDo not disassemble or alter this unit in any way.

≥Restriction on use of unauthorized copied content ( 50)


4 VQT3X49

Getting started

Package contents and accessoriesCheck the package contents and supplied accessories before using this unit.

Package contents

Parts Parts number

Stands (with cables) RYP1714B-K: REDRYP1714A-K: WHITE

Bases RYP1745-K k 2Screws XSN5i12FJKk 8

Speaker cablesREEX1268: GREENREEX1269: GRAYREEX1270: BLUE

SUBWOOFER(SB-HW490)

CENTER(SB-HC490)

SURROUND(SB-HS290)

FRONT(SB-HF490)

(Speakers)

(Stands)

(Bases)

Main unit(SA-BTT490)

(Screws)

(Speaker cable)


Getti

ng st

arte

d

5VQT3X49

≥ Product numbers provided in this Owner’s Manual correct as of January 2012. These may be subject to change.≥ Do not use AC power supply cord with other equipment.[For_Canada]≥ The enclosed Canadian French label sheet corresponds to the English display on the front and back side of the unit.

Unit and media care∫ Clean this unit with a soft, dry

cloth≥ Never use alcohol, paint thinner or benzine to

clean this unit.≥ Before using chemically treated cloth, carefully

read the instructions that came with the cloth.

∫ This unit’s lens≥ Use the lens cleaner (not supplied) to clean the

unit’s lens.

∫ Clean discs

Wipe with a damp cloth and then wipe dry.

∫ Disc and card handling precautions

≥ Handle discs by the edges to avoid inadvertent scratches or fingerprints on the disc.

≥ Do not attach labels or stickers to discs.

≥ Do not use disc cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.

≥ Clean any dust, water, or foreign matter from the terminals on the rear side of the card.

≥ Do not use the following discs:– Discs with exposed adhesive from removed

stickers or labels (rented discs, etc).– Discs that are badly warped or cracked.– Irregularly shaped discs, such as heart

shapes.

∫ To dispose or transfer this unitThe unit may keep the user settings information in the unit. If you discard this unit either by disposal or transfer, then follow the procedure to return all the settings to the factory presets to delete the user settings. ( 44, “To return all settings to the factory preset.”)The operation history may be recorded in the memory of this unit.

Accessories

∏ 1 Remote control(N2QAYB000727)

∏ 1 AC power supply cordFor the U.S.A. and Canada(K2CB2CB00021)For units with PX printedon the packaging(K2CQ2CA00007)

∏ 1 FM indoor antenna

(RSAX0002)

∏ 1 Sheet of speaker cable sticker

∏ 2 Batteries for remote control

∏ 1 AC plug adaptorFor units with PX printed on the packaging(K2DAYYY00002)

DO DO NOT


6 VQT3X49

Playable media

≥ See pages 7 and 50 for more information on the types of content that can be played.

Type Logo examples Type detail Playable contentsBD-Video Video

BD-RE Video, JPEG, MPO

BD-R Video, MKV

DVD-Video Video

DVD-R

Video, AVCHD, MKV, JPEG, MPO, FLAC, MP3, WAV

DVD-R DL

DVD-RWVideo, AVCHD

— +R/+RW/+R DL

Music CD Music [CD-DA]

— CD-RCD-RW

MKV, JPEG, MPO, FLAC, MP3, Music [CD-DA], WAV

SD Memory Card (from 8 MB to 2 GB)SDHC Memory Card (from 4 GB to 32 GB)SDXC Memory Card (48 GB, 64 GB)

(Compatible with both mini and micro types)

AVCHD, AVCHD 3D, MP4, MPEG2, JPEG, MPO

— USB devices(up to 2 TB)

MP4, MPEG, MKV, JPEG, MPO, FLAC, MP3, WAV

BD

DVD

CD

SD

USB


Getti

ng st

arte

d

7VQT3X49

∫ Discs that cannot be played in this unit

Any other disc that is not specifically supported or previously described.≥ DVD-RAM≥ Super Audio CD≥ Photo CD≥ DVD-Audio≥ Video CD and Super Video CD≥ WMA discs≥ All types of DivX discs≥ PAL discs≥ HD DVD≥ BD-Video discs recorded at a rate of 50 fields/

sec∫ Region management informationBD-VideoThis unit can play BD-Video discs supporting the region code “A”.

DVD-VideoThis unit can play DVD-Video discs supporting the region number “1” or “ALL”.

∫ FinalizeDVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by a recorder, etc. needs to be finalized by the recorder to play on this unit. Please refer to the recorder’s instructions.

∫ BD-Video≥ This unit supports high bit rate audio (Dolby

Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adopted in BD-Video.

∫ 3D≥ 3D videos and 3D still pictures can be played

back when this unit is connected to a 3D compatible TV using a High Speed HDMI Cable.

≥ 2D video can be enjoyed as 3D virtually. ( 35)

∫ Music CD≥ Operation and sound quality of CDs that do not

conform to CD-DA specifications (copy control CDs, etc.) cannot be guaranteed.

≥ The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format so playback may not be possible.

∫ SD card≥ miniSD Cards, microSD Cards,

microSDHC Cards and microSDXC Cards can be used, but must be used with an adaptor card. These are usually supplied with such cards, or otherwise customer provided.

≥ To protect the card’s contents, move the record prevention tab (on the SD card) to “LOCK”.

≥ This unit is compatible with SD Memory Cards that meet SD Card Specifications FAT12 and FAT16 formats, as well as SDHC Memory Cards in FAT32 format and SDXC Memory Cards in exFAT.

≥ If the SD card is used with incompatible computers or devices, recorded contents may be erased due to the card being formatted etc.

≥ Useable memory may be slightly less than the card capacity.

∫ USB device≥ This unit does not guarantee connection with all

USB devices.≥ This unit does not support USB device charging.≥ FAT12, FAT16, FAT32 and NTFS file systems

are supported.≥ This unit supports USB2.0 High Speed.≥ This unit supports an HDD formatted in FAT32

and NTFS. If the HDD is not recognized the power to the HDD may not be supplied. Supply power from an external source.

≥ It may not be possible to play the above media in some cases due to the type of media, the condition of the recording, the recording method and how the files were created.

≥ The producers of the disc can control how discs are played, so you may not always be able to control play as described in this Owner’s Manual. Read the disc’s instructions carefully.

Example:

24

1ALL1

Example:


8 VQT3X49

Control reference guide

∫ Using the remote controlInsert so the poles (i and j) match those in the remote control.

Point it at the remote control signal sensor on this unit. ( 9)

1 Turn the unit on and off2 Select title numbers, etc./Enter numbers or

characters[CANCEL]: Cancel

3 Select the source4 Basic playback control buttons ( 23)5 Select preset radio stations ( 29)6 Show status messages ( 24)7 Show the Home screen of the VIERA

Connect ( 30)8 [3, 4, 2, 1]: Move the highlight for selection

[OK]: Confirm the selection(2;)(;1): Frame-by-frame ( 23)

9 Show OPTION menu ( 32)10 Colored buttons

Used for various purposes depending on the display

11 Set the sound mode ( 41)12 Select surround sound effects ( 41)/Set the

sleep timer1Press and hold [–SLEEP].2While “SLEEP ££” is displayed, press

[–SLEEP] several times to select the time (in minutes).

≥ Timer selection is up to 120 minutes.≥ Select “OFF” when canceling the setting.≥ To confirm the remaining time

Press and hold the button again.13 TV operation buttons

[Í TV]: Turn the television on and off[AV, INPUT]: Switch the input select[i j VOL]: Adjust the volume

14 Adjust the volume of the main unit15 Mute the sound

≥ “MUTE” flashes on the unit’s display, while the function is on.

≥ To cancel, press the button again or adjust the volume.

≥ Muting is canceled if the unit is turned off.16 Show NETFLIX screen17 Select radio stations manually ( 29)18 Exit the menu screen19 Show HOME menu ( 21)20 Show Pop-up Menu/Top Menu ( 24)21 Return to previous screen22 Start up a video communication ( 30)23 Select speaker channel ( 41)/Select audio

( 23)

Remote control

18

820

21

23

13

19

1

4 17

22

16

2

5

6

7

91011

3

14

15

12

R6/LR6, AA

(Alkaline or manganese batteries)


Getti

ng st

arte

d

9VQT3X49

1 Standby/on switch [Í/I] ( 18)Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.

2 Open or close the disc tray ( 20)3 Adjust the volume of the main unit4 Disc tray5 Stop ( 23)6 Start play ( 23)

7 SD card slot ( 20)8 USB port ( 20)9 Remote control signal sensor

Distance: Within approx. 7 m (23 ft.)Angle: Approx. 20o up and down, 30o left and right

10 Display11 Dock for iPod/iPhone ( 26)

1 AC IN terminal ( 17)* (For units with PX printed on the packaging)

The terminal is not polarized.2 Speaker terminals ( 13)3 Cooling fan4 LAN port ( 17)5 USB port ( 30)6 HDMI AV OUT (ARC) terminal ( 14, 16)7 HDMI1 IN (CABLE/SAT) terminal ( 16)

8 HDMI2 IN terminal ( 16)9 DIGITAL AUDIO IN terminal ( 14, 15, 16)10 FM radio antenna terminal ( 15)11 AUX terminal ( 15)12 VIDEO OUT terminal ( 15)13 Digital transmitter dock for wireless system14 (For units with PX printed on the packaging)

AC Voltage selector ( 17)

Main unit (Front)

VOLOPEN/CLOSE

SD CARD

iPod

1 2 3

4 5 76 119 108

Main unit (Rear)

1* 2 3 4 5 6 7 1311 128 9 10

VOLT ADJ110 127V 220 240V

VOLT ADJ110 127V 220 240V

14

(on the bottom of the unit)


10 VQT3X49

STEP 1: PositioningFor optimum positionPlace the front, center and surround speakers at approximately the same distance from the seating position.≥ Adjust the volume using the Delay time function if the distance between each speaker and the

seating position is not equal. ( 41)

A Center speaker≥ Put on a rack or shelf not to interfere with

the TV's various sensors (ambient light, etc.). Vibration caused by the speaker can disrupt the picture if it is placed directly on the TV.

B Front speakersC SubwooferD Surround speakers

≥ Place the speakers at the same height or higher than ear level.

≥ Keep your speakers at least 10 mm (13/32z) away from the system for proper ventilation.≥ Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick curtains.≥ For optional wall mount, refer to page 42.

∫ Enjoy surround speaker sound wirelesslyUse the optional Panasonic wireless system (SH-FX71).

∫ Upgrade to 7.1-channel systemThe main unit is designed to enjoy the 7.1ch surround sound. A more theater-like effect is possible with a wireless connection.

Necessary equipment:≥ Wireless system (SH-FX71)

2 optional systems≥ 2 additional speakers

[Impedance: 3 ≠ to 6 ≠, Speaker input power: 100 W (Min)]

≥ For more details, refer to the operating instructions for SH-FX71.≥ The WIRELESS LINK indicator lights green when this unit and SH-FX71 are connected wirelessly. You can also check the

link status if you press and hold the [SOUND] of this unit. When WIRELESS LINK is turned on, the main unit's display shows the message, “WIRELESS SPEAKERS LINKED”.

120°

60°

Wireless connections (SH-FX71)


Getti

ng st

arte

d

11VQT3X49

STEP 2: Preparing the speakers

1 Attach the stand to the base.

2 Tighten the 3 screws (supplied) securely.

3 Attach the speaker.

(Continued on the next page)

Assembling the front speakers

Thread the speaker cable through the base.

Slide the speaker cable into the groove.

Speaker cable


12 VQT3X49

4 Tighten the screw (supplied) securely.

≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.

Attach the speaker cable sticker (supplied) and connect the speaker cables to the speakers.≥ When connecting speakers with the optional wireless system SH-FX71 ( 10), use the supplied

speaker cables of SH-FX71.e.g., Surround speaker

Connecting the speaker cables

SURROUNDLch

Push

r: Whites: Blue line

Speaker cable sticker (supplied)Connector

Speaker indication

Speaker cable sticker ConnectorFRONT Lch 1 WHITEFRONT Rch 2 REDSURROUND Lch 3 BLUESURROUND Rch 4 GRAYCENTER 5 GREENSUBWOOFER 6 PURPLE


Getti

ng st

arte

d

13VQT3X49

STEP 3: ConnectionsTurn off all equipment before connection and read the appropriate owner’s manual.Do not connect the AC power supply cord until all other connections are complete.

Connect the speaker cables to the terminals of the same color.

Speaker connection


14 VQT3X49

∫ HDMI≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.

It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0 meters (16.4 ft.) or less.Recommended part number (High Speed HDMI Cable):RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.), RP-CDHS50 (5.0 m/16.4 ft.), etc.

≥ Audio will be output through the system's speakers when “Off” is selected in “HDMI Audio Output”. ( 37)∫ TV Audio≥ To output TV audio from this unit's speakers, you need to switch the selector. ( 20)∫ OPTICAL IN≥ After making the digital audio connection, make settings to suit the type of audio from your digital equipment. ( 37)

≥ Do not make the video connections through the VCR.Due to copy guard protection, the picture may not display properly.

* If the HDMI terminal on the TV is labeled “HDMI (ARC)”, the connection of the optical digital audio cable is not required.

Connection to a TV

Best quality

OPTICALOUTHDMI

Optical digital audio cable* (not supplied)

HDMI cable (not supplied)

What is ARC?ARC is an abbreviation of Audio Return Channel, also known as HDMI ARC. This feature allows a home theater system to receive and play audio from the TV through a signal HDMI cable without additional wiring.


Getti

ng st

arte

d

15VQT3X49

≥ Use an FM outdoor antenna if radio reception is poor.

Standard picture and better audio

Standard picture and audio

OPTICALOUT

L

VIDEO IN

R

AUDIO IN

Optical digital audio cable (not supplied)

Video cable (not supplied)

L

VIDEO IN

R

AUDIO IN

L

R

AUDIO OUT

Video cable (not supplied)

Audio cable (not supplied)

FM antenna connection

Affix this end of the antenna to a wall or pillar where the reception is best.

FM indoor antenna (supplied)


16 VQT3X49

∫ When the connecting devices have an HDMI terminal

HDMI standby pass-throughEven if this system is in standby mode, the audio and/or video signal from the device connected to the HDMI1 IN (CABLE/SAT) or HDMI2 IN terminal will be sent to the TV connected to the HDMI AV OUT terminal (the sound will not be output from this system). Even while the unit is in the standby mode, you can change the input signal HDMI1 IN (CABLE/SAT) or HDMI2 IN by pressing [EXT-IN] on the remote control.

∫ When the connecting devices do not have an HDMI terminal

Other device connection

AV IN(ARC)

AV OUTAV OUT

e.g.,Set Top Box, etc. Video game, etc.



OPTICALOUT

e.g.,


Set Top Box, etc.


Getti

ng st

arte

d

17VQT3X49

The following services can be used when this unit is connected to broadband.≥ Firmware can be updated ( 19)≥ You can enjoy BD-Live ( 24)≥ You can enjoy VIERA Connect ( 30)≥ You can access other devices (Home Network) ( 31)

≥ This unit supports Wi-Fi DirectTM and can make a wireless connection to wireless devices without router. You can use this function when enjoying Home Network feature, etc. Internet access is not available while connected via Wi-Fi DirectTM. ( 31, 38)

For details about connection method, refer to the instructions supplied with the connected equipment.

This unit can be connected to a wireless router wirelessly.

≥ For up to date compatibility information on your wireless router refer tohttp://panasonic.jp/support/global/cs/(This site is in English only.)For additional information about this unit refer to http://www.panasonic.com/consumer/support (For U.S.A.)

≥ The unit is not compatible with public wireless LAN services provided in airports, stations, cafes etc.≥ See page 3 for the precautions of wireless LAN connection.

≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.≥ Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.

STEP 4: Connecting to an AC power sourceConnect only after all other connections are complete.

≥ This unit consumes a small amount of AC power ( 49) even when turned off. In the interest of power conservation, if you will not be using this unit for an extended period of time, it can be disconnected.

Connection to the network

Wireless LAN connection

LAN cable connection

Wireless router, etc. Internet

LAN Cable (not supplied)

InternetBroadband router, etc.

VOLT ADJ110 127V 220 240V

AC power supply cord(supplied)

To a household AC outlet

(For units with PX printed on the packaging)Before connecting the AC power supply cord;Set the voltage at the bottom of the main unit.≥ Use a flat-head screwdriver to move the voltage selector to the

appropriate position for the area in which this system is used.≥ If the power plug does not fit your AC

outlet, use the AC plug adaptor (supplied). If it still doesn't fit, contact an electrical parts distributor for assistance.


18 VQT3X49

STEP 5: Settings

After connecting your new home theater for the first time and pressing [Í], a screen for the basic settings will appear.

PreparationTurn on the television and select the appropriate video input on the television.

1 Press [Í].Setup screen appears.

2 Follow the on-screen instructions and apply the settings.

≥ You can perform this setup anytime by selecting “Easy Setting” in the Setup menu. ( 39)

≥ If this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later via an HDMI cable, then setting information on the TV such as “On-screen Language” is acquired by this unit.

After completing “Easy Setting”, you can perform “Easy Network Setting”.

Select “Wired” and press [OK].

Follow the on-screen instructions to apply your connection settings.

Preparation≥ Obtain your network name ( 19, SSID).≥ If your wireless connection is encrypted,

please be sure that you know your encryption key (password).

1 Select “Wireless” and press [OK].

2 Select “Search for wireless network” or “WPS (PUSH button method)” and press [OK], then follow the on-screen instructions and apply the settings.

∫ “WPS (PUSH button method)”If you are using a wireless router that supports WPS (Wi-Fi Protected SetupTM), you can easily perform the settings.

∫ “Search for wireless network”The available wireless networks will be displayed.1 Select your network name and press [OK].

≥ If your network name is not displayed, search again by pressing the [R] button on the remote control. Stealth SSID will not be displayed, in this case enter manually.

When your wireless network is encrypted2 Press [OK] to select “Encryption Key”.

Easy Setting

Easy Network Setting

Wired connection

Easy Network Setting

WiredWireless

Select a connection mode. Current setting : Wired

OKRETURN

Wireless connection

Wireless Settings

Select a connection method.Please refer to the operating instructions of your wireless access point about connection methods.

Search for wireless network

WPS (PUSH button method)

Search again

Wireless Settings

Reception

Select a wireless network for connection.

Network name (SSID)XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

R G B YOK

RETURNOPTION

Wireless SettingsEnter the encryption key (password) of the wireless network.

Encryption Key

Set


Getti

ng st

arte

d

19VQT3X49

3 Enter your encryption key (password).

To enter your network name (SSID) manuallyIf your network name (SSID) is not displayed in step 1, follow these steps.1 To display the network name (SSID) input

screen:Press [HOME] select “Others” [OK] select “Setup” [OK] select “Network” [OK] select “Network Settings” [OK] select “Wireless Settings” [OK] select “Connection Setting” [OK] select “Manual setting” [OK]

2 Press [OK] to select “SSID” and enter your SSID.

≥ If your wireless network is encrypted, go to step 2.

≥ Refer to the operating instructions of the hub or router.≥ WPS (Wi-Fi Protected Setup) is a standard that facilitates

settings relating to the connection and security of wireless LAN devices. To see whether your wireless router supports WPS, check the wireless router operating instructions.

≥ You can perform this setup anytime by selecting “Easy Network Setting” in the Setup menu. ( 38)

≥ You can redo these settings individually using “Network Settings”. ( 38)

≥ Do not use this unit to connect to any wireless network for which you do not have usage rights.During automatic searches in a wireless network environment, wireless networks (SSID*) for which you do not have usage rights may be displayed; however, using these networks may be regarded as illegal access.

≥ After performing network settings on this unit, the settings (encryption level, etc.) of the wireless router might change. When you have trouble getting online on your PC, perform the network settings on your PC in accordance with the settings of the wireless router.

≥ Please be aware that connecting to a network without encryption may result in the content of the communication being illegitimately viewed by a third party, or the leaking of data such as personal or secret information.* SSID:

An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular network. Transmission is possible if the SSID matches for both devices.

If you have more than one Panasonic products and the remote control operates both products at once, you will need to change the remote control code to prevent this occurrence. ( 40, “Remote Control Code”)

Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. These updates are available free of charge.

This unit is capable of checking the firmware automatically when connected to the Internet via a broadband connection.When a new firmware version is available, the following message is displayed.

To update the firmwarePress [HOME] select “Others” [OK] select “Setup” [OK] select “System” [OK] select “Firmware Update” [OK] select “Update Now” [OK]

DO NOT DISCONNECT the unit from the AC power or perform any operation while the update takes place.After the firmware is installed, “FINISH” will be displayed on the unit’s display. Unit will restart and the following screen will be displayed.

≥ If downloading on this unit fails or this unit is not connected to the Internet, then you can download the latest firmware from the following website and burn it to a CD-R to update the firmware.http://panasonic.jp/support/global/cs/(This site is in English only.)To show the firmware version on this unit. ( 40, “Firmware Version Information”)

≥ Downloading will require several minutes. It may take longer or may not work properly depending on the connection environment.

≥ If you do not want to check for the latest firmware version, set “Automatic Update Check” to “Off”. ( 40)

l

3

6

9

#

“

2

5

8

0

‘

1

4

7

*

;

g

n

u

@

,

f

m

t

.

-

e

l

s

z

_

d

k

r

y~

c

j

q

x

:

b

i

p

w

/

a

h

o

vSpace

Symbols

Encryption Key (Password)

Shift Delete

Finish

Alphanumeric Other Characters

OK

RETURNS

a

Wireless SettingsEnter your network name (SSID) to connect.

SSID

Set

Reprogramming the remote control

Firmware updates

New firmware is available.Please update firmware in Setup.

The firmware was updated.Current Version: x.xx

RETURN

OK


20 VQT3X49

Inserting or removing media

≥ When inserting a media item, ensure that it is facing the right way up.

≥ When removing the SD card, press the center of the card and pull it straight out.

≥ If you connect a Panasonic product with a USB connection cable, the setup screen may be displayed on the connected equipment. For details, refer to the instructions for the connected equipment.

≥ Use the front USB port when you connect a USB memory or a USB HDD. The USB port on the rear panel is only for the Communication Camera.

Enjoying TV with unit’s speakers1 Connect the TV and the main unit.

( 14-15)2 Press [EXT-IN] several times to select the

appropriate external input mode. ( 21)≥ Reduce the volume on the TV to its

minimum, and then adjust the volume of the main unit.

1 Press and hold [jAUDIO] to activate the audio setting mode.

2 Press [jAUDIO] several times to select the audio. (MAIN, SAP)≥ Set “PCM-FIX” ( 37) to “Off”.≥ “SAP” (Secondary Audio Program) only

works with Dolby Dual Mono.

≥ You cannot change the audio type when the TV is connected to this unit via the AUX terminal.

SD CARD

VOLOPEN/CLOSE

Selecting the type of audio


Getti

ng st

arte

d

21VQT3X49

HOME menuMajor functions of this unit can be operated from the HOME menu.

PreparationTurn on the television and select the appropriate video input on the television.

1 Press [Í] to turn on the unit.

2 Press [OK] or [3, 4, 2, 1] to select the item.≥ If there are any other items, repeat this

step.

EXT INWhen you want to output audio of an external device from this unit, select the name of the terminal to which you have connected the device.

If audio output from a TV or STB is selected, “(TV)” or “(CABLE/SATELLITE)” is displayed. ( 37)

Network

FM Radio

Videos/Photos/Music

Sound

iPod

Others

To show the HOME menuPress [HOME].

≥ Items to be displayed may vary with the media.≥ When the selector is switched, it may take time to play

back the selected video and/or audio.≥ To save on electricity, the power is turned off automatically

if there is no button operation for about 30 minutes when not playing back (such as when paused, displaying the menu, displaying still pictures, etc.). (Compatible with ENERGY STAR)

AUX AUX terminal

ARC HDMI AV OUT (ARC) terminal

DIGITAL IN DIGITAL AUDIO IN terminal

HDMI IN1HDMI IN2

HDMI1 IN (CABLE/SAT) and/or HDMI2 IN terminal ( 16)

Network Service

Displays the Home screen of VIERA Connect. ( 30)

Home Network

DLNA Client ( 31)Media Renderer ( 31)

To enjoy the FM radio ( 29)

HOME

Home theater

Videos MusicPhotos

Network

Personalize 1st user

EXT IN FM Radio

Sound OthersiPod

OK

Disc Play back the contents. ( 23)≥ When multiple contents are

recorded, select the types of contents or the title.

SD Card

USB

Select sound quality (equalizer). ( 34)

All( 26)Music

Videos

Setup ( 35)SD Card Management ( 24)

Wallpaper Changes the background of HOME menu.


22 VQT3X49

Multi User ModeMulti User Mode is a function that enables switching of multiple settings easily.Up to 4 people can use the unit with their own settings.

Following settings can be personalized.≥ The user icon≥ The wallpaper of Home menu≥ The audio and picture settings ( 32, 35)

A The user name and icon currently selectedB Personalize a new user and switch the

users with colored buttons.

1 Press [HOME].

2 Press a colored button that indicates new user personalization.

3 Select an item and change the settings according to the indications.The following items can be set.

4 Select “Confirm” and press [OK].

To change the personalized user informationSelect “Edit User Information” from Setup menu. ( 40)

∫ Using colored buttonsPress the colored buttons in the Home menu to switch to the user corresponding to the button.

∫ Using facial recognition(Only when connected to Communication Camera 30)

1 Press [OPTION] in the Home menu.

2 Select “Facial Recognition” and press [OK].

3 Turn the face to Communication Camera.The camera determines the closest face from the face pictures of the personalized users and displays the results.

4 Press [OK].≥ To redo the facial recognition, press [RETURN].

∫ Using registered smartphonesWhen the unit is turned on using the registered smartphone, the user who registered the smartphone will automatically be selected.≥ Perform the “Remote Device Settings”. ( 38)

≥ To use smartphones as a remote control, installation of dedicated software is required. For more details, refer to the following website.http://panasonic.jp/support/global/cs/(This site is in English only.)

Personalizing a new user

Input Nickname Personalize a user name.

Select Icon

Personalize a user icon. Select from illustrationsThe image can be selected from prepared illustrations.Create from PhotosIf the Communication camera is connected, you can shoot and personalize your photo.≥ You can also select a

photo in recording media as an icon. ( 32, “Icon Personalization”)

HOME

Home theater

Videos MusicPhotos

NetworkEXT IN FM Radio

Sound OthersiPod

USER1A

USER1 Personalize 2nd userB

OK

Select Wallpaper

Personalize a background of the Home menu.≥ Other than prepared

wallpapers, you can also select a photo in recording media as an wallpaper. ( 32, “Wallpaper”)

Personalize Smartphone

Smartphone used as a remote control can be registered with respect to each user.≥ Multiple users cannot be

registered for one smartphone.

Switching the user


Getti

ng st

arte

d Pl

ayba

ck

23VQT3X49

Playback

Playback1 Insert the media.

Playback starts depending on the media.

2 Select the item to play and press [OK].Repeat this procedure if necessary.

≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press [∫STOP] when you have finished playback to protect the unit’s motor, your television screen and so on.

≥ MKV: Successive play is not possible.≥ It is not possible to play back AVCHD and MPEG2 video

which have been dragged and dropped, copied and pasted to the media.

Following functions may not work depending on the media and contents.

Press [∫STOP].The stopped position is memorized.Resume play functionPress [1PLAY] to restart from this position.≥ The position is cleared if the tray is opened or

you press [∫STOP] several times to display “STOP” on the unit’s display.

≥ On BD-Video discs including BD-J, the resume play function does not work.

Press [;PAUSE].≥ Press [;PAUSE] again or [1PLAY] to restart play.

SearchWhile playing, press [SEARCH6] or [SEARCH5].≥ Music and MP3: The speed is fixed to a single step.Slow-motionWhile paused, press [SEARCH6] or [SEARCH5].≥ BD-Video and AVCHD: [SEARCH5] only.The speed increases up to 5 steps.≥ Press [1PLAY] to revert to normal playback speed.

While playing or paused, press [:] or [9].Skip to the title, chapter or track.

While paused, press [2] (2;) or [1] (;1).≥ Press and hold to change in succession forward

or backward.≥ Press [1PLAY] to revert to normal playback

speed.≥ BD-Video and AVCHD: [1] (;1) only.

Press and hold [jAUDIO] to activate the audio setting mode.You can change the audio channel number or soundtrack language, etc.

Operations during playback

Stop

Pause

Search/Slow-motion

Skip

Frame-by-frame

Changing audio


24 VQT3X49

Press [POP-UP MENU/TOP MENU].≥ Select the item and press [OK].

While playing, press [STATUS].The status messages give you information about what is currently being played. Each time you press [STATUS], the display information may change or will disappear from the screen.≥ Depending on media and contents, the display

may change or may not appear.

e.g., BD-Video

A T: Title, C: Chapter, PL: PlaylistB Elapsed time in the titleC Current positionD Total timee.g., JPEG

PreparationConnect 3D compatible TV to an HDMI AV OUT terminal of this unit using a High Speed HDMI Cable. ( 14, 16)≥ Perform the necessary preparations for the TV.≥ Play back following the instructions displayed

on the screen.≥ 3D Settings ( 35, 37)

≥ Please refrain from viewing 3D images if you do not feel well or are experiencing visual fatigue.In the event that you experience dizziness, nausea, or other discomfort while viewing 3D images, discontinue use and rest your eyes.

≥ 3D images may not output as settings of “HDMI Resolution” and “24p Output”. ( 36)

≥ When playing back 3D photos from “Photos” screen, select from the “3D” list. (Still pictures in “2D” are played back in 2D.)If “2D” and “3D” indications are not displayed, press [R] to switch the view of playback contents.

With “BD-Live” discs, you can enjoy bonus contents that use Internet access.For this BD-Live function, insertion of an SD card is necessary along with Internet connection.

1 Perform network connection and settings. ( 17, 18)

2 Insert an SD card with 1 GB or more free space.≥ The SD card is used as the local storage.

3 Insert the disc.

∫ Deleting data/Formatting SD cards

Select “SD Card Management” in the Home menu ( 21), then select “BD-Video Data Erase” or “Format SD Card” and press [OK].

≥ The usable functions and the operating method may vary with each disc, please refer to the instructions on the disc and/or visit their website.

≥ “BD-Live Internet Access” may need to be changed for certain discs ( 39).

Displaying menus and playback information

Show top menu/pop-up menu

Show the status messages

PlayBD-Video

T1 C1 0:05.140:20.52

A

C D

B

Date 11/12/2007 Size 500 x 375ManufacturerEquipment

1 / 26

Enjoying 3D video and photos

Enjoying BD-Live


Play

back

25VQT3X49

Play a slideshow of photos and make various settings during the playback.

1 Insert the media.

2 Select “Photos”.

3 Select an item and press [G].The following items can be set.

≥ Still pictures displayed as “ ” cannot be played back with this unit.

≥ When a music CD, a USB device with music recorded, and an iPod/iPhone are inserted/connected to this unit, iPod/iPhone has priority to played back as background music.

Using the iPod/iPhoneCompatible iPod/iPhone (as of January 2012)≥ Update your iPod/iPhone with the latest

software before using this unit.≥ Compatibility depends on the software version

of your iPod/iPhone.≥ iPod/iPhone compatibility assures music, video

and photo playback and battery charge functions of this unit as a home theater system.

* Playback functions on the main unit may be limited in the “All” mode.

≥ In some locations, reception status of an iPhone may be poor when it is loaded on this unit.

≥ When the iPhone receives a call while connected to this unit, playback, etc. of the iPhone may stop.To prioritize the operation with the iPhone connected to this unit, make the setting so that the iPhone does not receive calls.

≥ Avoid using Wi-Fi mode on your iPhone while the network functions or surround speakers on this unit are in use wirelessly.

About recharging the battery≥ iPod/iPhone will start recharging regardless of whether this

unit is on or off.≥ “IPOD CHARGING” will be shown on the main unit’s

display during iPod/iPhone charging in main unit standby mode.

≥ iPod/iPhone will not be recharged after the battery charge completion.

Slideshow

Start Slideshow

Start the slideshow.You can display still pictures in the selected folder one by one at a constant interval.

Display Interval Change the display interval.

Transition Effect

Select the effect when sliding pictures.

Repeat Play Set whether to repeat the slideshow.

Soundtrack

Set whether to play background music.≥ You can select the soundtrack

from USB device, Music CD and iPod/iPhone.

≥ Some media cannot be selected as the source depending on the case.

Soundtrack Folder

Select the folder from which the music files are played.

Random Soundtrack

Background music is played in random order.

iPod touch:1st, 2nd, 3rd, and 4th generation

iPod nano:1st, 2nd, 3rd, 4th, 5th, and 6th* generation

iPod classic

iPod: 5th* generation

iPhone 4S/ iPhone 4 / iPhone 3GS / iPhone 3G/ iPhone


26 VQT3X49

Preparation≥ Turn the main unit off or reduce the volume of

the main unit to its minimum.1 Push the center of drawer (A), and pull

out fully until it clicks to open the dock.

2 Attach the dock adapter (B) until it is firmly in place.≥ To purchase a dock adapter, consult your

local dealer for iPod/iPhone.

3 Connect the iPod/iPhone firmly.≥ Check that the connector has no dust or

foreign materials before connecting.

≥ Make sure that the video cable connection is made to view photos/videos on the TV.

Preparation≥ To display the picture, turn on the TV and select

the appropriate video input mode.1 Press [HOME].

2 Select “iPod” and press [OK].

3 Select the item to play.≥ Select “All” mode to display the photo.≥ Repeat this procedure if necessary.

“All” modeIf “All” mode is used, you can use your iPod or iPhone to play back music/photo/video files. The remote control of this unit can be used to control iPod/iPhone operations.

Album artwork (For music playback only.)e.g., music playback screen

≥ If album artwork is not contained in the

data, “ ” will appear on TV.≥ Depending on the software version of your

iPod/iPhone, the album artwork may not appear properly.

≥ Some operations may not work while reading the album artwork.

1 Press [iPod] to select “IPOD”.

2 Press [STATUS] several times to select the menus.

3 Press [3, 4] to select an item and press [OK].

≥ The setting of the playback mode will be kept until changes are made on the same iPod/iPhone.

≥ This function does not work when “All” is selected.≥ Surround sound effect and sound mode are available.

iPod/iPhone Connection

The center of drawer

iPod/iPhone (not supplied)

AUDIO IN

VIDEO IN

iPod/iPhone Playback

Other methods of playback

iPod

Ronaldo

-2:30

Good morning

45 of 1230

Happy days

1:00


TV &

Rad

ioPl

ayba

ck

27VQT3X49

TV & Radio

VIERA LinkTM

“HDAVI ControlTM”

Preparation1 Set “VIERA Link” to “On” ( 39).

(The default setting is “On”.)2 Set the “HDAVI Control” operations on the

connected equipment (e.g., TV).3 Turn on all “HDAVI Control” compatible

equipment and select this unit’s input channel on the connected TV so that the “HDAVI Control” function works properly.Also when the connection or settings are changed, repeat this procedure.

When the following operations are performed, the input channel of the television will be automatically switched and the screen of this unit will be displayed.When the television is off, the television will automatically turn on.– When play starts on the unit– When an action that uses the display screen is

performed(e.g., Home menu)

≥ This function does not work when the iPod/iPhone selector is chosen. ( 26)

All connected equipment compatible with “HDAVI Control”, including this unit, automatically turns off when you switch the television off.

Playing music continuously even after turning off power to the televisionWhen the unit is connected to a Panasonic TV (VIERA) that supports HDAVI Control 2 or later.Select “Video” in “Power Off link” ( 39)

Only when TV supports “HDAVI Control 2” or laterBy using the TV remote control, you can perform various playback operations and settings.See the operating instructions of the TV for more details.

≥ The buttons that you can use for this unit vary depending on the TV. For details, refer to the operating instructions for the TV.

≥ The operation of this unit may be interrupted when you press certain buttons on the TV remote control.

≥ This unit supports “HDAVI Control 5” function.“HDAVI Control 5” is the newest standard (current as of November, 2011) for Panasonic’s HDAVI Control compatible equipment. This standard is compatible with Panasonic’s conventional HDAVI equipment.

≥ VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.

≥ Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function.

Automatic input switchingPower on link

What is VIERA Link “HDAVI Control”?

VIERA LinkTM is a new name for EZ SyncTM.VIERA Link “HDAVI Control” is a convenient function which will link the operations of this unit and a Panasonic TV (VIERA) under “HDAVI Control”.You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipment for operational details.

Power Off link

Easy control only with VIERA remote control


28 VQT3X49

You can select whether audio is output from the unit’s speakers or the TV speakers by using the TV menu settings. Switch the audio output setting of the TV to this unit’s speakers.

When the TV is turned on, this unit will also automatically turn on.

1 Press [HOME].2 Press [3, 4, 2, 1] to select “Others” and

press [OK].3 Press [2, 1] to select “Setup” and press [OK].4 Press [3, 4] to select “Audio” and press [OK].5 Press [3, 4] to select “TV Audio Input” and

press [OK].6 Press [3, 4] to switch “AUX”, “ARC” or

“DIGITAL IN” and press [OK].≥ Select an audio input terminal connected to

the unit.

≥ For details, refer to the operating instructions of the TV.

When the STB power is turned on, this unit and the TV will automatically turn on. The video is output from the TV, and the audio is output from the speakers of this unit.≥ When “HDMI Standby Pass-Through” is set to

“Yes” ( 36) this unit will not turn on.

Connecting the HDMI cable≥ The setting for audio output is not necessary

when the unit is connected to the STB with an HDMI cable.

Connecting the optical digital audio cable≥ When this unit and the STB are connected by

an optical digital audio cable, the settings below are required to enable output of audio from the speakers of this unit.

1 Press [EXT-IN] to select “D-IN”.2 Press [STATUS] to select “CABLE/

SATELLITE AUDIO ON”.Set to “CABLE/SATELLITE AUDIO OFF” when this unit and the STB are not connected by an optical digital audio cable.

Enjoying TV and STB with unit’s speakers

Select the TV audio

OPTICALOUT


e.g.,

Select the STB audio


Set Top Box, etc.

e.g.,



Set Top Box, etc.

e.g.,


TV &

Rad

ioRe

fere

nce

Adva

nced

op

erati

ons

29VQT3X49

Listening to the RadioYou can preset up to 30 channels.PreparationMake sure that the FM antenna is connected. ( 15)

1 Press [RADIO] to select “FM”.

2 Press and hold [STATUS] to select “LOWEST” or “CURRENT”.LOWEST:To begin auto preset with the lowest frequency (FM87.9).CURRENT:To begin auto preset with the current frequency.** To change the frequency, refer to “Manual

tuning and presetting”.

3 Press and hold [OK].

Release the button when “AUTO” is displayed.The tuner starts to preset all the stations it can receive into the channels in ascending order.

1 Press [RADIO] to select “FM”.

2 Press the number buttons to select the channel.To select a 1-digit numbere.g., 1: [1] [OK].To select a 2-digit numbere.g., 12: [1] [2].Alternatively, press [W, X] or [3, 4].

∫ Manual tuning and presettingSelect a radio broadcast.1 Press [RADIO] to select “FM”.2 Press [SEARCH6] or [SEARCH5] to

select the frequency.≥ To start automatic tuning, press and hold [SEARCH6],

[SEARCH5] until the frequency starts scrolling. Tuning stops when a station is found.

To preset the channel3 While listening to the radio broadcast

Press [OK].4 While “P” is flashing on the display

Press the number buttons to select the channel.

≥ A station previously stored is overwritten when another station is stored in the same channel preset.

≥ The radio settings will be shown on the unit's display. (Some settings are also indicated on the TV screen.)

Presetting stations automatically

Listening to a preset channel


30 VQT3X49

Advanced operations

Enjoying Network Service(NETFLIX, etc.)You can access information services from the VIERA Connect Home screen via the Internet.

* Images are for illustration purposes, contents may change without notice.

Preparation≥ Network connection ( 17)≥ Network setting ( 18)

To enjoy video communication (ex. SkypeTM) :≥ Connect this unit with optional Communication

Camera (TY-CC20W or TY-CC10W).Depending on your location, this optional camera may not be available. Please consult your local Panasonic dealer for advice.

≥ For operating method refer to the following website.http://panasonic.jp/support/global/cs/(This site is in English only.)

1 Press [INTERNET].≥ The video communication service can be

accessed directly by pressing [ ] button, and NETFLIX can be accessed directly by pressing [NETFLIX] button.

2 Select the item and press [OK].

To exit from VIERA ConnectPress [EXIT], [HOME] or [POP-UP MENU/TOP MENU].

≥ When playing content in the media, VIERA Connect cannot be accessed by pressing [INTERNET].

≥ In the following cases, settings are possible using the Setup menu items.– When restricting the use of VIERA Connect

( 39, “Network Service Lock”)– When the audio is distorted

( 38, “Audio Auto Gain Control”)– When wrong time is displayed

( 38, “Time Zone”, “DST”)≥ If using slow Internet connection, the video may not be

displayed correctly. A high-speed Internet service with a speed of at least 6 Mbps is recommended.

≥ Be sure to update the firmware when a firmware update notice is displayed on the screen. If the firmware is not updated, you will not be able to use the VIERA Connect function. ( 19)

≥ VIERA Connect Home screen is subject to change without notice.

≥ The services through VIERA Connect are operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the services.

≥ All features of websites or content of the service may not be available.

≥ Some content may be inappropriate for some viewers.≥ Some content may only be available for specific countries

and may be presented in specific languages.

*

MORE

BACK

XXXXXX

Featured Videos

XXXXXXXXXXX

XXXXXXXX

XXXXXXXX

New York, NY

Mostly Cloudy39°F

XXXXXX

Market

XXXXXXXXXXXXXXXXXXXX

XXXXX

VIERA Connect provides a variety of selected Internet services such as the following.≥ Online movie rental service≥ Video communication service≥ Video browsing service

Internet

Communication Camera TY-CC20W or TY-CC10W


Adva

nced

op

erati

ons

31VQT3X49

Home Network feature

You can share photos, videos and music stored in the DLNA Certified media server (PC with Windows 7 installed, smartphone, etc.) connected to your home network, and enjoy the contents with this home theater.

Preparation1 Perform network connection ( 17) and

network settings ( 18) of this unit.2 Perform Home Network settings of the

connected equipment.3 Add the contents and folder to the libraries of

the Windows Media® Player or the smartphone, etc.≥ Playlist of Windows Media® Player can play

back only the contents that are stored in the libraries.

1 Press [HOME].

2 Select “Network”.

3 Select “Home Network”.

4 Select “DLNA Client”.≥ The list can be updated by pressing [R] on

the remote control.≥ The connection method can be switched to Wi-Fi

Direct by pressing [G] on the remote control.

5 Select the equipment and press [OK].

6 Select the item to play and press [OK].≥ You may be able to use convenient

functions depending on the content by pressing [OPTION].

≥ Control Panel ( 33) is displayed once the playback starts. Press [OK] if the Control Panel is not displayed, and press [RETURN] to hide the Control Panel.

To exit from Home NetworkPress [EXIT], [HOME] or [POP-UP MENU/TOP MENU].

You can use the smartphone, etc. as the Digital Media Controller (DMC) to play back contents from DLNA server on the Renderer (this unit).Possible applications:

* DMC compatible software should be installed.PreparationPerform steps 1 to 3. ( left)4 Perform the “Remote Device Settings”. ( 38)

≥ You can register up to 16 devices.

1 Press [HOME].

2 Select “Network”.

3 Select “Home Network”.

4 Select “Media Renderer”.

5 Select “Home Network” or “Wi-Fi Direct” and press [OK], then follow the indications on the screen.

6 Operate the DMC compatible devices.

To exit from Media Renderer screenPress [HOME].

≥ Wi-Fi Direct connection while using Home Network feature is only temporary, and the network connection method returns to the original setting when exiting.

≥ Depending on the contents and the connected equipment, playback may not be possible.

≥ Items displayed in gray on the display cannot be played back by this unit.

≥ This unit can be played back via connected equipment only when controlled using DMC.

Playing back contents on the DLNA server

Server

Home Theater

Using the Digital Media Controller

For more details, refer to the following website and the operating instructions for each of the equipment.http://panasonic.jp/support/global/cs/(This site is in English only.)

*

*

*Renderer

Renderer

Server

Server+

Controller

Controller


32 VQT3X49

Option menuA variety of playback operations and settings can be performed from this menu.Available options differ depending on the playing contents and the condition of the unit.

About Multi User Mode: Settings of the items with this indication are

saved by the respective users registered in the Home menu.Please refer to page 22 for details about user registration and switching.

1 Press [OPTION].e.g., BD-Video

2 Select an item and change the settings.To exit the screenPress [OPTION].

Regarding Language: ( 50)

∫ SoundtrackShow or change the soundtrack.

∫ Audio channelSelect the audio channel number.

∫ SubtitleChange the subtitle settings.

∫ AngleSelect the number of the angle.

∫ Repeat Play(Only when the elapsed time is being displayed on the unit’s display.)Select the item which you want to repeat. ≥ The items displayed differ depending on the

type of media.≥ Select “Off” to cancel.

∫ ShuffleSelect whether or not to play random.

∫ Start SlideshowStart the slideshow.

∫ StatusShow the status messages.

∫ Rotate Right∫ Rotate LeftRotate the still picture.

∫ WallpaperSet the still picture to the wallpaper of HOME menu. ( 21)

∫ Icon PersonalizationSet the still picture as your user icon. ( 22)

∫ VideoThe recording method of original video appears.

∫ Secondary Video

Operation Menu

Operation Menu

Pop-up Menu

Top Menu

Playback Information Window

Control Panel

Status

Repeat Play

Angle

Subtitle

Soundtrack

Off

Secondary Video

1

1 ENG DTS-HD MSTR Multi

Video

Select on/off of images. The recording method of original video appears.≥ During search/slow-motion or

frame-by-frame, only the primary video is displayed.

Soundtrack Select on/off of audio and the language.


Adva

nced

op

erati

ons

33VQT3X49

∫ Playback Information WindowDisplays the following.

Press [RETURN] to exit.

∫ Control PanelDisplay the Control Panel.Playing back while using VIERA Link, etc.

Press [RETURN] to hide the Control Panel.

∫ Top MenuDisplay Top Menu.

∫ Pop-up MenuDisplay Pop-up Menu.

∫ MenuDisplay Menu.

You can access settings to enjoy special features of this unit from this category. Refer to “Video Settings” and “Audio Settings” ( 34) for more details on each setting item.

∫ Picture Mode Select the picture quality mode during play.≥ If you select “User”, you can change settings in

“Picture Adjustment”.

∫ Picture Adjustment Specific picture quality settings can be performed.≥ 3D NR:

Reduces the rough noise in the background to give a greater feeling of depth.When “24p Output” is set to “On”, this function may not operate. ( 36)

≥ Integrated NR:Smoothes block noise and reduces the smudging that appears around contrasting sections of the picture.

∫ Chroma Process The high-resolution processing of HDMI chroma signals produces a high-resolution picture with rich picture quality.

∫ Detail Clarity The picture is sharp and detailed.

∫ Super Resolution Pictures of normal image quality are corrected to sharp and detailed images when output as 1080i/1080p from HDMI AV OUT.

∫ ProgressiveSelect the method of conversion for progressive output to suit the type of material being played.≥ When the content is distorted change the

settings from “Auto” to “Video”.

∫ 24pMovies and other material recorded on DVD-Video at 24p are output at 24p.≥ Only when you have selected “On” in “24p Output” ( 36).

∫ Screen AspectSwitch the screen mode.

∫ Reset to Default Video SettingsReturn video settings to the factory preset.

Audio/video attribute information of disc.

Settings status of “Digital Audio Output” ( 36).

HDMI output information.

Personal Preference

EXITe.g.,

Video Settings


34 VQT3X49

“Surround Effects” and “Sound Effects” can also be set by using the [SURROUND] and [SOUND] on the remote control. ( 41)∫ Surround Effects

BD/DVD (Multi-ch Source):

TV/CD/iPod (2ch Source):

∫ Sound Effects*1, 2, 3

TV/CD/iPod (2ch Source):Re-master:This feature gives you brighter sound by increasing the high frequency portion of the audio. (Discs recorded at 48 kHz or less)Recommended settings:

Digital Tube Sound:This feature gives you warm sound, like that produced by a vacuum tube amplifier.

All:

∫ High Clarity Sound When connected to TV via the HDMI terminal for outputting image, it produces clearer sound.≥ Only when you have selected “Enable” in “High

Clarity Sound” ( 37).

Audio Settings

3D Cinema Surround

Expand the sound field forward, backward, upward, right and leftward providing a sound with depth and force that bettermatches 3D images.

7.1ch Virtual Surround

You can enjoy 6.1/7.1-channel surround-like effect using 5.1-channel speakers.

2ch Stereo

You can play any source in stereo. Sound will be output to the front speakers and the subwoofer only.

Multi Channel Out

You can enjoy sound from the front speakers, as well as the surround speakers even when playing stereo sources.

Super Surround

You can enjoy sound from all speakers with stereo sources.

Dolby Pro Logic II Movie

Suitable for movie software, or the one recorded in Dolby Surround.

Dolby Pro Logic II Music

Adds 5.1-channel effects to stereo sources.

Re-master 1 Pop and rock

Re-master 2 Jazz

Re-master 3 Classical

Digital Tube Sound 1 A crisp, delicate sound

Digital Tube Sound 2 A tight, hi-fi sound

Digital Tube Sound 3 A soft, rich sound

Digital Tube Sound 4 A clear, powerful sound

Digital Tube Sound 5

A distinctive mid-range sound

Digital Tube Sound 6 A soft, enveloping sound

EqualizerYou can select sound quality settings.Flat/Heavy/Clear/Soft

Subwoofer

You can adjust the amount of bass.Level 1 (Weakest effect) to Level 4 (Strongest effect)≥ Levels can be set by

source.

H.Bass

You can enhance low-frequency sound so that heavy bass sound can be heard clearly, even if the acoustics of your room are not optimal.

Whisper-Mode Surround

You can enhance the surround effect for low volume sound. (Convenient for late night viewing.)

Center Focus

You can make the Center channel sound seem like it is coming from within the TV.


Adva

nced

op

erati

ons

35VQT3X49

∫ High Clarity Sound Plus When playing back music contents, it improves the sound quality by stopping the video output.≥ Only when you have selected “Enable” in “High

Clarity Sound” ( 37).

*1 Not every function can be set individually.*2 When audio is output from the HDMI AV OUT terminal this

function is effective only when “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” is set to “PCM”. ( 36)

*3 This function has no effect when the type of audio is Dolby Pro Logic II.

∫ Signal Format

∫ 3D Picture Mode

∫ Manual Settings

∫ Pop-Out Level (Only when “Full HD” is selected in “3D Type” ( 37).)3D position for the Option menu or message screen etc. can be adjusted during 3D playback.

Setup menuChange the unit’s settings if necessary. The settings remain intact even if you switch the unit to standby.Some items in the Setup menu are common to the Option menu. You can get the same effect by both menus.

About Multi User Mode: Settings of the items with this indication are

saved by the respective users registered in the Home menu. Please refer to page 22 for details about user registration and switching.

1 Press [HOME].

2 Press [3, 4, 2, 1] to select “Others” and press [OK].

3 Press [2, 1] to select “Setup” and press [OK].

4 Select an item and change the settings.

To exit the screenPress [HOME].

∫ Picture Mode ( 33)

∫ Picture Adjustment ( 33)

∫ Chroma Process ( 33)

∫ Detail Clarity ( 33)

∫ Super Resolution ( 33)

∫ HDMI OutputPress [OK] to show the following settings:

3D Settings

Original Keep original picture format.

Side by side 3D picture format comprising of left and right screens.

2D to 3D Converts 2D pictures to 3D effect.

Normal Play back pictures with normal 3D effects.

SoftYou can enjoy 3D pictures with a feeling of broadness, holding back the depth perception.

Manual Play back 3D pictures with settings of “Manual Settings”.

Distance Set the amount of depth perception.

Screen Type Selects how the screen appears during 3D playback (flat or round).

Frame Width Set the amount of feathering at the edge of screen.

Frame Color Set the color of feathering at the edge of screen.

Video

OK

RETURN

Setup

System

Ratings

Network

Language

3D

Audio

Video

Black Level Control

Seamless Play

Still Mode (paused video)

HDMI Output

Super Resolution

Detail Clarity

Chroma Process

Picture Adjustment

Picture Mode

Lighter

On

Auto

1

0

Advanced

Normal


36 VQT3X49

HDMI ResolutionThe items supported by the connected devices are indicated on the screen as “¢”. When any item without “¢” is selected, the images may be distorted.≥ If “Auto” is selected, the best suited output

resolution to the connected television is automatically selected.

≥ To enjoy high-definition video up-converted to 1080p, you need to connect the unit directly to 1080p compatible HDTV (High Definition Television). If this unit is connected to an HDTV through other equipment, the other equipment must also be 1080p compatible.

24p OutputWhen this unit is connected to a TV supporting 1080/24p output using an HDMI cable, movies and other material recorded at 24p are output at 24p.≥ When playing DVD-Video, set to “On” and then set

“24p” in “Video Settings” ( 33) to “On”.≥ When BD-Video images other than 24p are

played, images are output at 60p.≥ 24p: A progressive image recorded at a rate of 24

frames per second (motion-picture film). Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials.

HDMI Color ModeThis setting is for selecting color-space conversion of the image signal when the unit is connected using an HDMI cable.

Deep Color OutputThis setting is for selecting whether to use Deep Color output when a television that supports Deep Color is connected.

Contents Type FlagDepending on the playback content, the TV will output adjusting to the optimal method when a TV that supports this function is connected.

HDMI Standby Pass-ThroughEven if this unit is in standby mode, a device connected with this unit can output videos and sound to the TV.Moreover, you can switch the HDMI input terminal by pressing [EXT-IN] on the remote control.≥ Sound will not be output from this unit's

speakers.

∫ Still Mode (paused video)Select the type of picture shown when you pause playback.

∫ Seamless PlayThe chapter segments in playlists are played seamlessly.≥ Select “On”, when the picture freezes for a

moment at the chapters segment in playlists.

∫ Black Level Control(This works only for video output from the VIDEO OUT terminal.)Select lighter or darker for adjusting the black level to the desired setting for picture enhancement.

∫ Surround Effects ( 34)

∫ Sound Effects ( 34)

∫ Dynamic Range CompressionYou can listen at low volumes but still hear dialog clearly.(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)≥ “Auto” is effective only when playing Dolby TrueHD.

∫ Digital Audio OutputPress [OK] to show the following settings:

Dolby D/Dolby D +/Dolby TrueHDDTS/DTS-HD

Select the audio signal to output.≥ Select “PCM”, when the connected equipment

cannot decode the respective audio format. This unit decodes the audio format and transmits to the connected equipment.

≥ Not making the proper settings may result in noise.

BD-Video Secondary AudioSelect whether or not to mix the primary and secondary audio (including the button click sound).If “Off” is selected, the unit outputs the primary audio only.

Auto Automatically selects the type of picture shown.

Field Select if jittering occurs when “Auto” is selected.

Frame Select if small text or fine patterns cannot be seen clearly when “Auto” is selected.

Audio


Adva

nced

op

erati

ons

37VQT3X49

HDMI Audio OutputThis setting selects whether or not to output audio from HDMI.≥ Audio will be output through the system's

speakers when “Off” is selected.

∫ Digital Audio InputPress [OK] to show the following settings:

PCM-FIXSelects the audio output from the devices connected to this unit.≥ “On”: PCM is available.≥ “Off”: DTS, PCM and Dolby Digital are available.Select “On” if the sound is cut off intermittently.

∫ TV Audio InputSelect the TV audio input to work with the VIERA Link operations.

∫ DownmixSelect the downmix system of multi-channel to 2-channel sound.≥ Select “Surround encoded” to enjoy the

surround sound.≥ There is no downmix effect on the bitstream

audio signal.≥ The audio will be output in “Stereo” in the

following cases:– AVCHD playback– Dolby TrueHD playback– Playback of secondary audio (including the

button click sound).

∫ High Clarity Sound When connected to TV via the HDMI AV OUT terminal for outputting image, it produces clearer sound.≥ Select “Enable” to use “High Clarity Sound” or “High

Clarity Sound Plus” in the Option menu. ( 34, 35)

∫ Audio DelaySynchronization between picture and sound is corrected by adjusting the delay time of the audio output.

∫ SpeakerRefer to page 40.

∫ 3D BD-Video PlaybackSelect the playback method of 3D compatible video software.

∫ 3D AVCHD OutputSelect the output method of 3D AVCHD videos.

∫ 3D TypeSelect the format of the connected TV.≥ Change the settings for 3D on the TV also when

“Checker board” or “Side by side” is selected.

∫ 3D Playback PrecautionsSet to display or hide the 3D viewing warning screen when playing back the 3D compatible video software.

∫ Manual Settings ( 35)

∫ Pop-Out Level ( 35)

∫ Audio LanguageChoose the language for audio.≥ If “Original” is selected, the original language of

each disc will be selected.≥ Enter a code ( 50) when you select “Other

¢¢¢¢”.

∫ Subtitle LanguageChoose the language for the subtitle.≥ If “Auto” is selected and the language selected

for “Audio Language” is not available, subtitles of that language will automatically appear if available on that disc.

≥ Enter a code ( 50) when you select “Other ¢¢¢¢”.

3D

Language


38 VQT3X49

∫ Menu LanguageChoose the language for the disc menus.≥ Enter a code ( 50) when you select “Other

¢¢¢¢”.

∫ Subtitle TextSelect a suitable item according to the language used for MKV subtitles text.≥ This item is displayed only after playing back a file.

∫ On-screen LanguageChoose the language for menus and on-screen messages.

∫ Easy Network Setting ( 18)

∫ Network SettingsPerform network-related settings individually.Press [OK] to show the following settings:

LAN Connection ModeSelect the LAN connection method.≥ Select “Wireless Master” when you make a

direct wireless connection between this unit and a Home Network device. Internet connection is not available when this item is selected.

Wireless SettingsThis allows the wireless router and connection settings to be set. Current connection settings and connection state can be checked.

Connection SettingThe wireless router connection wizard will be displayed.

Double Speed Mode Setting (2.4GHz)When a 2.4 GHz wireless format is used, this sets the connection speed.≥ If you connect using the “Double Speed

Mode (40MHz)”, 2 channels use the same frequency band, and there is consequently a greater risk of reception interference. This can cause the connection speed to drop or become unstable.

IP Address/DNS SettingsThis is for checking the state of the network connection and setting the IP address and DNS-related.

Press [OK] to show the respective setting.

Proxy Server SettingsThis is for checking the state of connection with the Proxy server and performing settings.Press [OK] to show the respective setting.

Network Service Settings ( 30) (VIERA Connect)

Press [OK] to show the following settings:

Audio Auto Gain ControlVolume that is different depending on the contents is adjusted automatically to the standard volume while using the VIERA Connect.≥ Depending on contents, this function effect

will not work.≥ Select “Off” when the audio is warped.

Time ZoneBy selecting the time zone, it is possible to set the unit’s time to match your location.≥ Some VIERA Connect contents require the time

zone to be set. Set the time zone if necessary.

DSTSelect “On” when using Daylight Saving time.

Network Drive ConnectionIt is possible to access the shared folder of equipment not compatible with DLNA, such as the Windows XP operating system, and play back video, still pictures, and music on this unit.For the setting and operation method of connected equipment, refer to the following Website. http://panasonic.jp/support/global/cs/(This site is in English only.)

Remote Device Settings ( 31)Press [OK] to show the following settings:

Remote Device OperationEnable to operate by DMC.≥ If “On” is selected, “Quick Start” is fixed to “On”.

Setting Unit NameSet the name of this unit to be displayed on the connected equipment.

Network


Adva

nced

op

erati

ons

39VQT3X49

Registration Type

Remote Device ListRegistering/deregistering of the displayed equipment can be performed when “Manual” in “Registration Type” is selected.

BD-Live Internet Access ( 24)You can restrict Internet access when BD-Live functions are used.≥ If “Allow (Limited)” is selected, Internet

access is permitted only for BD-Live contents which have content owner certificates.

The following items use the same password.Don’t forget your password.

∫ DVD-Video RatingsSet a ratings level to limit DVD-Video play.

∫ BD-Video RatingsSet an age limit of BD-Video play.

∫ Network Service LockYou can restrict the usage of VIERA Connect.

∫ Easy SettingYou can execute basic settings.

∫ Display SettingsPress [OK] to show the following settings:

TV AspectSet to match the type of television connected.When connected to a 4:3 aspect television and playing 16:9 ratio image:

When connected to a 16:9 widescreen television and playing 4:3 ratio image:

Screen Saver FunctionThis is to prevent burn-in on the screen.≥ When this is set to “On”:

If a list of playback content is displayed and there is no operation for 10 minutes or more, the screen switches to HOME menu automatically.

≥ While playing and pausing, etc., this function is not available.

Status MessagesChoose whether to show status messages automatically.

VIERA LinkSet to use “HDAVI Control” function when connected via HDMI cable to a device that supports “HDAVI Control”.≥ Select “Off” when you do not want to use

“HDAVI Control”.

Power Off linkSelect the desired power off link setting of this unit for VIERA Link operation ( 27). (This works depending on the settings of the connected VIERA Link “HDAVI Control” compatible equipment.)

Video/Audio:When the TV is turned off, this unit will turn off automatically.Video:When playing back audio only content, the unit will not turn off automatically.

Auto Allow connection to all the equipment that is accessing this unit.

ManualSet the permission of the connection individually for the equipment that is accessing this unit.

Ratings

System

4:3

The sides are cut off so the picture fills the screen. When playing BD-Video, video is output as “4:3 Letterbox”.

4:3 Letterbox

Black bands appear at the top and bottom of the picture.

16:9Video is displayed as a 4:3 ratio image in the center of the screen.


40 VQT3X49

∫ Unit SettingsPress [OK] to show the following settings:

Front Panel DisplayChanges the brightness of the unit’s display.≥ If “Auto” is selected, the display is set to bright

and only dimmed during playback.

Edit User InformationChange the user information registered in the Home menu.

∫ Quick StartSpeed of startup from power off is increased.≥ When set to “On”, the internal control unit will be

powered and the idle power consumption will increase compared to when set to “Off”. (About the power consumption 49)

∫ Remote Control CodeChange the remote control code if other Panasonic products react to this remote control.

∫ Firmware Update ( 19)Press [OK] to show the following settings:

Automatic Update CheckWhen this equipment remains connected to the Internet, it will check for the latest firmware version when it is turned on and you can update it if necessary.

Update NowYou can update the firmware manually if a firmware update is available.

∫ System InformationPress [OK] to show the following settings:

LicenseInformation about the software used by this unit is displayed.

Firmware Version InformationDisplay firmware version of this unit and wireless LAN module.

∫ Restore Default SettingsThis returns all values in the Setup menu and the Option menu to the default settings, except for some settings of network, ratings, remote control code, language, etc.

A Volume (Channel balance)B Delay time for the Center speakerC Delay time for the Surround and Surround

back speakers** Surround back speakers: optional ( 10)

∫ Adjusting speaker level(Effective when playing multi-channel audio)1 Select “Test” and press [OK].

A test signal is output.2 While listening to the test signal

Press [3, 4] to adjust the volume of each speaker ( ).The volume can be adjusted between r6 dB to s6 dB.≥ Set each speaker level according to the

volume of the Front (L) and Front (R) speaker volume respectively.

3 Press [OK].The test signal stops.

Speaker settings

0

00

0.0

0.0ms

CompleteTest

LS

RL

RS

dB

dBdB

msC

0dB

SW

dB0


Adva

nced

op

erati

ons

41VQT3X49

∫ Delay timeFor optimum listening with 5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position.If either distance 1 or 2 is less than 3, measure the distance and adjust the time to make up for the difference (see the table below).

1 2 3: Primary listening distanceA Actual speaker positionB Ideal speaker position

1 Press [3, 4, 2, 1] to select the distance box ( ) and press [OK].

2 Press [3, 4] to select the setting and press [OK].

Delay time for the Center speakerSubtract the distance 1 from 3

Delay time for the Surround and Surround back speakers

Subtract the distance 2 from 3

To finish the speaker settingPress [3, 4, 2, 1] to select “Complete” and press [OK].

Enjoying sound effects from all speakersFor more details on each setting, refer to “Audio Settings” on the Option menu( 34)

1 Press [SURROUND].2 Press [3, 4] to select “MULTI CH SOURCE”

or “2CH SOURCE”, and then press [OK].e.g.,

3 While the selected mode is displayedPress [3, 4] to select the desired setting. ( 34)

∫ Adjusting speaker level during play

1 Press [CH SELECT] to activate the speaker setting mode.

2 Press [CH SELECT] several times to select the speaker.

≥Press [2, 1] to adjust the balance of the front speakers.

3 Press [3] (increase) or [4] (decrease) to adjust the speaker level for each speaker. s6 dB to r6 dB

1 Press [SOUND].2 Press [3, 4] to select “2CH SOURCE” or

“ ALL SOURCE”, and then press [OK].e.g.,

3 While the selected mode is displayedPress [3, 4] to select the desired setting and press [OK]. Repeat this procedure if necessary. ( 34)

≥ The sound effects/modes may not be available or have no effect with some sources.

≥ You may experience a reduction in sound quality when these sound effects/modes are used with some sources. If this occurs, turn the sound effects/modes off.

Distance (Approx.) Setting34 cm (1 ft. 1 in.) 1.0 ms68 cm (2 ft. 2 in.) 2.0 ms102 cm (3 ft. 4 in.) 3.0 ms136 cm (4 ft. 5 in.) 4.0 ms170 cm (5 ft. 6 in.) 5.0 ms

Distance (Approx.) Setting170 cm (5 ft. 6 in.) 5.0 ms340 cm (11 ft. 1 in.) 10.0 ms510 cm (16 ft. 8 in.) 15.0 ms

:

:

L

LS

R

SW

C

RS

C

RSLS

1

2

3

A

B

0.0ms

Surround Effects

Sound Effects


42 VQT3X49

Speaker installation optionConsult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers and personal injury.

You can attach all of the speakers (except subwoofer) to a wall.≥ The wall or pillar on which the speakers are to

be attached should be capable of supporting 10 kg (22 lbs) per screw.

1 Drive a screw (not supplied) into the wall.

A At least 30 mm (1 3/16q)B ‰ 4.0 mm (5/32q)C ‰ 7.0 mm to ‰ 9.4 mm (9/32q to 3/8q)D Wall or pillarE 5.5 mm to 7.5 mm (7/32q to 5/16q)

2 Fit the speaker securely onto the screw(s) with the hole(s).

Use the measurements indicated below to identify the screwing positions on the wall.≥ Leave at least 20 mm (25/32q) of space above the

speaker and 10 mm (13/32q) on each side to allow enough space for fitting the speaker.

Front speakerAttach to a wall without the base and the stand.

A 51 mm (2q)B 64 mm (2 17/30q)C 350 mm (13 25/32q)

Surround speaker

D 40 mm (1 9/16q)E 24 mm (15/16q)

Center speaker

F 18 mm (23/32q)G 25 mm (31/32q)H 230.5 mm (9 1/16q)

Attaching to a wall

e.g., Front speakerDO NOT DO

≥ In this position, the speaker will likely fall if moved to the left or right.

≥ Move the speaker so that the screw is in this position.


Adva

nced

op

erati

ons

43VQT3X49

It is possible to shorten the height of the front speaker by directly connecting the speaker to the base without using the stand.

PreparationDetach the speaker cable from the stand.

1 Thread the detached cable through the base.

2 Attach the speaker to the base and tighten the screw (supplied) securely.

3 Connect the speaker cable to the speaker and to the terminal of the main unit. ( 12, 13)

∫ Reattaching the speaker cable to the stand

Preventing from fallingFront speakerPreventing from droppingFront speaker, Surround speaker, Center speaker

1 Thread a string to the speaker.≥ Use a string of less than ‰ 2.0 mm (3/32q),

which is capable of supporting over 10 kg (22 lbs).

e.g., Front speaker

A String (not supplied)B Rear of the speaker

2 Thread a string from the wall to the speaker and tie tightly.

C Screw eye (not supplied)D WallE Approx.150 mm (5 29/32q)F Less than 100 mm (3 15/16q)

Front speaker assembly option

Straighten the cable and run through the stand.

Pull out the cable through the hole.

Preventing the speakers from falling or dropping

When mounted on a wall

When placed on the floor


44 VQT3X49

Reference

Troubleshooting guideBefore requesting service, please perform the following steps.

The following do not indicate a problem with this unit:– Regular disc rotating sounds.– Image disturbance during search.– Image disturbance when replacing 3D discs.

∫ Unit doesn’t respond to remote control or front panel buttons.

Press and hold [Í/I] on the main unit for 3 seconds.– If still unable to power the unit off, disconnect the power

cord, wait 1 minute, then reconnect the power cord.

∫ Cannot eject disc.The unit may have a problem.1 While the unit is off, press and hold [OK], [B]

and [Y] on the remote control at the same time for more than 5 seconds.–“00 RET” is displayed on the unit’s display.

2 Repeatedly press [1] (right) on the remote control or [Í/I] on the unit until “06 FTO” is displayed on the unit’s display.

3 Press [OK] on the remote control or [< OPEN/CLOSE] on the unit.

To return to the factory preset.Select “Yes” in “Restore Default Settings” in the Setup menu. ( 40)

To return all settings to the factory preset.Reset the unit as follows:

1 While the unit is off, press and hold [OK], [B] and [Y] on the remote control at the same time for more than 5 seconds.–“00 RET” is displayed on the unit’s display.

2 Repeatedly press [1] (right) on the remote control or [Í/I] on the unit until “08 FIN” is displayed on the unit’s display.

3 Press and hold [OK] on the remote control or [< OPEN/CLOSE] on the unit for at least 3 seconds.

This unit is turned off when the input for the TV is switched.

This is a normal phenomenon when using VIERA Link (HDAVI Control 4 or later). For details please read the operating instructions for the TV.

The remote control doesn’t work properly.Change the batteries in the remote control. ( 8)The remote control and main unit are using different codes. If “SET ” is displayed on the unit’s display when a button is pressed on the remote control, change the code on the remote control. ( 40, 48)

The TV tuner mode is not displayed when the TV is switched on.

This phenomenon may occur, depending on the TV setting, when “Quick Start” is set to “On”.Depending on the TV, this phenomenon may be prevented by reconnecting the HDMI cable to a different HDMI input terminal or by changing the HDMI auto connection setting.

You have forgotten your ratings password.You want to cancel the ratings level.

The ratings level returns to the factory preset.1 While the unit is on, press and hold [OK], [B]

and [Y] on the remote control at the same time for more than 5 seconds.–“00 RET” is displayed on the unit’s display.

2 Repeatedly press [1] (right) on the remote control or [Í/I] on the unit until “03 VL” is displayed on the unit’s display.

3 Press [OK] on the remote control or [< OPEN/CLOSE] on the unit.

(For the U.S.A. and Canada)Do you have the latest firmware installed?Firmware updates may be released to correct operating irregularities that are discovered with certain movies. ( 19)

4Make the following checks and visit our website for more information.For U.S.A.: www.panasonic.com/helpEnter the model number.For Canada: http://www.panasonic.ca

4Or visit our website to find a service center.You can find a service center near you easily on our website.Other support information:“Customer Services Directory (United States and Puerto Rico)” ( 54) or “Limited Warranty (Only for CANADA)” ( 55).(For units with PX printed on the packaging)Do you have the latest firmware installed?Firmware updates may be released to correct operating irregularities that are discovered with certain movies. ( 19)Even so, you still have trouble, consult your dealer.

General operation


Refe

renc

e

45VQT3X49

This unit does not recognize the USB connection correctly.

Disconnect and reconnect the USB cable. If it still does not recognize the connection, turn the power of this unit off and on again.If you connect USB HDD to this unit, use USB extension cable that is supplied with the HDD.

The unit switches to standby mode.This unit will automatically turn to standby mode after 30 minutes if it is inactive. ( 21)When the time set for the sleep timer has passed, the power will be turned off. ( 8)One of the unit’s safety devices is activated. Press [Í/I] on the main unit to turn the unit on.

The unit does not turn off.1 Press and hold [Í/I] on the main unit for 5

seconds. (If still unable to power the unit off, disconnect the power cord, wait 1 minute, then reconnect the power cord.)

2 Reset the unit as follows:While the unit is off, press and hold [+ VOLUME], [< OPEN/CLOSE] and [Í/I] on the main unit at the same time for more than 5 seconds.

The images from this unit do not appear on the TV.Picture is distorted.Jittering occurs.

An incorrect resolution is selected in “HDMI Resolution”. Reset the setting as follows:

1 While the unit is on, press and hold [OK], [B] and [Y] on the remote control at the same time for more than 5 seconds.–“00 RET” is displayed on the unit’s display.

2 Repeatedly press [1] (right) on the remote control or [Í/I] on the unit until “04 PRG” is displayed on the unit’s display.

3 Press and hold [OK] on the remote control or [< OPEN/CLOSE] on the unit for at least 3 seconds.Set the item again. ( 36)–When Dolby Digital Plus, Dolby TrueHD,

and DTS-HD audio are not output in bitstream, select “Yes” in “Restore Default Settings” and make proper settings. ( 40)

When “3D BD-Video Playback” in the Setup menu is set to “Auto”, images may not be output depending on the connection method. After removing the disc from this unit, select “Set before play” in the Setup menu, and select “2D Playback” in the setup screen displayed when playing 3D discs. ( 37)

If irregular coloring occurs on your TV, turn the TV off for about 30 minutes.If it persists, move the speakers further away from the TV.

Video is not output.Set “High Clarity Sound” in the Setup menu to “Disable” to use the VIDEO OUT terminal. ( 37)

Video is not output in high-definition.Confirm that “HDMI Resolution” in the Setup menu is set properly. ( 36)

3D video is not output.Change the settings as required by the connected TV format. ( 37, “3D Type”)Are the settings on this unit and the TV correct? ( 24)Depending on the connected TV, the video being played back might switch to 2D video due to changes in resolution etc. Check the 3D setting on the TV.Check that proper HDMI video input is selected on the TV.

3D video is not output correctly as 2D.Select “Set before play” in the Setup menu, and select “2D Playback” in the setup screen displayed when playing 3D discs. ( 37, “3D BD-Video Playback”)Discs that have recorded titles with Side by side (2 screen structure) and that can be enjoyed in 3D are played back in accordance with the settings of the TV.

No subtitles.When progressive output is on, closed captions/subtitles cannot be displayed.

The subtitles overlap closed captions recorded on discs.

Turn off the subtitles or the closed caption setting on the TV. ( 32)

A black band is displayed around the edge of the screen.The aspect ratio of the screen is abnormal.

Confirm the “TV Aspect” is set properly. ( 39)Adjust the aspect setting on the television.

Picture


46 VQT3X49

No sound.Low volume.Distorted sound.Cannot hear the desired audio type.

Check connections to speakers and other equipment. ( 11s17)Ensure the speaker settings for your speakers are correct. ( 40)To output audio from a device connected with an HDMI cable, set “HDMI Audio Output” to “On” in the Setup menu. ( 37)When “BD-Video Secondary Audio” is set to “On”, Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio and DTS-HD High Resolution Audio are output as Dolby Digital or DTS Digital Surround.Re-master will not work when the bitstream signal is output from the HDMI AV OUT terminal. ( 34)Depending on the connected equipment, the sound may be distorted if this unit is connected with an HDMI cable.The multi-channel audio from a device connected to the TV is not output in it’s original multi-channel form.–If the device has an optical audio output

terminal, connect the device to this unit’s DIGITAL AUDIO IN terminal. ( 16)

No surround sound.Press [SURROUND] to select a surround effect. ( 41)(When using the 7.1ch speaker system)Audio is not available from the surround back speakers (optional) even though Dolby Pro Logic II turns on.

Cannot switch audio.When audio is output from the HDMI AV OUT terminal, set “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to “PCM”. ( 36)

No sound from the TV.Press [EXT-IN] to select the corresponding source. ( 20)When connecting the unit to a TV using an HDMI cable, check whether the HDMI terminal on the TV is labeled “HDMI (ARC)”. If not labeled in this way, connect using the HDMI cable in combination with an optical digital audio cable.( 14)If there is no sound from the equipment connected to this unit’s DIGITAL AUDIO IN terminal, please make sure that the optical audio output of the equipment is set to PCM.

Disc cannot be played.The disc is dirty. ( 5)

Still pictures (JPEG) do not play back normally.The images that were edited on the PC, such as Progressive JPEG, etc., may not be played back.

I can’t play back BD-Live.The SD card is write-protected. ( 7)Confirm that this unit is connected to the broadband Internet. ( 17)Confirm the “BD-Live Internet Access” settings. ( 39)Confirm an SD card is inserted into the SD card slot. ( 20)

Alternative soundtrack and subtitles cannot be selected.

The languages are not recorded on the disc.You may not be able to use the Option menu to change the soundtrack and subtitles on some discs. Use the disc’s menus to make changes. ( 24)

Cannot charge or operate.Check that the iPod/iPhone is connected firmly. ( 26)The battery of the iPod/iPhone is depleted. Charge the iPod/iPhone, and then operate again.When unexpected operation occurs while using the iPod/iPhone, connect the iPod/iPhone again or try to restart the iPod/iPhone.

Cannot display iPod/iPhone videos/photos on the TV.Make sure that TV is connected to the VIDEO OUT terminal on this unit. ( 15)Operate the iPod/iPhone menu to make the appropriate video/photo output settings for your TV. (Refer to operating instructions for your iPod/iPhone.)

The TV input channel unintentionally changes to HDMI input.

When the main unit is connected with an “HDAVI Control” compatible TV and VIDEO IN is selected for iPod/iPhone video or photo playback, the TV input channel will automatically change to the HDMI input channel when [HOME] is pressed.–Re-select the TV’s VIDEO IN input channel.

Sound Playback

iPod/iPhone operation


Refe

renc

e

47VQT3X49

Distorted sound or noise is heard.Adjust the position of the antenna.

A beat sound is heard.Try to keep a certain amount of distance between the antenna and the TV.

Stations cannot be selected.1 Press [RADIO] to select “FM”.2 Press and hold [RADIO].

After a few seconds the display changes to show the current lowest frequency (87.9 MHz). Continue to hold the button down. The lowest frequency changes (87.5 MHz) and the step is changed.

Noise is excessive.Change the audio to be output as monaural.

1 Press and hold [jAUDIO].2 Press [jAUDIO] to select “MONO”.

The sound becomes monaural.≥ To cancel, press the button again or change

the frequency.In normal circumstances, select “AUTO STEREO”

I can’t connect to the network.Confirm the network connection and settings. ( 17, 18, 38)Check the operating instructions for each device and connect accordingly.

When using wireless LAN connection, video from the DLNA Certified media server is not played back or video frames are dropped during playback.

Higher transfer rate router such as 802.11n (2.4 GHz) wireless router may solve the problem. If you use 802.11n (2.4 GHz) wireless router, it is necessary to set the encryption type to “AES”.Simultaneous use with a microwave, cordless telephone etc. at 2.4 GHz may result in connection interruptions or other problems.On the “Wireless Settings” screen ( 38), the continuous lighting of at least 4 “Reception” indicators is the target for a stable connection. If 3 or fewer indicators are lit or the connection is being interrupted, change the position or angle of your wireless router and see if the connection state improves. If there is no improvement, connect to a wired network and perform the “Easy Network Setting” ( 18) again.

MessagesThe following messages or service numbers appear on the television or unit’s display.

Cannot play.You inserted an incompatible disc (Discs recorded in PAL video, etc.).

Cannot display on this unit.You tried to play a non-compatible image.Confirm “SD” on the unit’s display is not displayed and re-insert the card.

No disc inserted.The disc may be upside down.

$ This operation is not available.Some operations are unsupported by the unit. For example;–BD-Video: During playback, reverse

slow-motion or reverse frame-by-frame is not possible.

IP address is not set.The “IP Address” in “IP Address/DNS Settings” is “---. ---. ---. ---”. Set the “IP Address”, “Subnet Mask”, and “Default Gateway”. (Select the automatic address acquisition if necessary.)

The current wireless network security setting is weak. It is recommended to change to a stronger security setting.

Authentication type for the wireless LAN is set to “Open system”, or the encryption type is set to “No encryption”. It is recommended to encrypt for safety reasons. For details, refer to the instructions of the wireless router being used. Encryption is required when playing back video, etc., from DLNA compatible devices.

No VideoDepending on the connected iPod/iPhone, video menu may not be available on the TV. Select “ALL” on the unit’s display and operate video playback from your iPod/iPhone menu. ( 26)

Radio

Network

On the television


48 VQT3X49

F99The unit fails to operate properly. Press [Í/I] on the main unit for 3 seconds to switch the unit to standby, then switch back on.

HDMI ONLYSome BD-Video discs can only be output with HDMI.

NETWhile connecting to a network.

No PLAYThere is a viewing restriction on a BD-Video or DVD-Video. ( 39)

No READThe media is dirty or badly scratched. The unit cannot play.

PLEASE WAITThe unit is carrying out an internal process. This is not a malfunction. You cannot operate the unit while “PLEASE WAIT” is displayed.

REMOVEThe USB device is drawing too much power. Remove the USB device.

SET (“ ” stands for a number.)The remote control and main unit are using different codes. Change the code on the remote control.Press and hold [OK] and the indicated number button at the same time for more than 5 seconds.

U59The unit is hot.The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears.Select a position with good ventilation when installing the unit.

H or F(“ ” stands for a number.)

Check and correct the speaker cable connections.There is something unusual.

Check the unit using the troubleshooting guide. If the service number remains displayed, do the following.

1 Disconnect the plug from the AC outlet, wait a few seconds, then reconnect it.

2 Press [Í/I] to turn the power on.If the service number remains displayed despite doing the above, request service from the dealer. Inform the dealer of the service number when requesting service.

IPOD OVER CURRENT ERRORThe iPod/iPhone is drawing too much power. Remove the iPod/iPhone, and turn the unit off and on again.

STARTThe system is being restarted during the firmware update. Please do not turn off the unit.

UPD/(“ ” stands for a number.)

The firmware is being updated.Please do not turn off the unit.

FINISHThe firmware update is complete.

NOT CONDITIONALThe requested operation cannot be conducted.

SET OKThe stations are set, and the radio tunes to the last preset station.

ERRORAutomatic presetting is unsuccessful. Preset the stations manually.

TUNED/STEREOStereo broadcasting or stereo sound is selected.

TUNEDMonaural broadcasting or monaural sound is selected.

On the unit’s display


Refe

renc

e

49VQT3X49

Specifications

* The impedance of all the speakers is 3 ≠.

* This unit supports “HDAVI Control 5” function.

Specifications are subject to change without notice.

GENERAL

Power consumption(For the U.S.A. and Canada): 84 W(For units with PX printed on the packaging): 89 W

Power consumption in standby mode(For the U.S.A. and Canada): Approx. 0.05 W(For units with PX printed on the packaging): Approx. 0.1 W

Power supply(For the U.S.A. and Canada): AC 120 V, 60 Hz(For units with PX printed on the packaging):

AC 110 V to 127 V, 220 V to 240 V, 50 Hz/60 Hz

iPod/iPhone Connector: DC OUT 5 V 1.0 A MAXDimensions (WkHkD): 430 mmk38 mmk279 mm

(1615/16qk11/2qk1031/32q)Mass (Weight): Approx. 2.7 kg (6 lbs)Operating temperature range: 0 oC to 40 oC (32 oF to 104 oF)Operating humidity range: 35 % to 80 % RH (no condensation)

AMPLIFIER SECTION

RMS TOTAL POWER OUTPUT: 1000 W1 kHz, 10 % total harmonic distortionFRONT: 185 W per ch (3 ≠)CENTER: 180 W per ch (3 ≠)SURROUND: 125 W per ch (3 ≠)100 Hz, 10 % total harmonic distortionSUBWOOFER: 200 W per ch (3 ≠)

FTC TOTAL POWER OUTPUT: 430 W120 Hz to 20 kHz, 1.0 % total harmonic distortion

FRONT: 60 W per ch (3 ≠)CENTER: 90 W per ch (3 ≠)SURROUND: 60 W per ch (3 ≠)

45 Hz to 120 Hz, 1.0 % total harmonic distortionSUBWOOFER: 100 W (3 ≠)

Audio InputAUX: k 1

Digital Audio InputOptical k 1HDMI AV input k 2Sampling frequency: 32 kHz, 44.1 kHz, 48 kHzAudio Format: PCM, Dolby Digital, DTS

FM TUNER SECTION

Frequency range: 87.9 MHz to 107.9 MHz (200 kHz step), 87.5 MHz to 108.0 MHz (100 kHz step)

Antenna terminals: 75 ≠ (unbalanced)

SPEAKER SECTION*

FRONT SPEAKERSFull range: 6.5 cm (21/2q) CONE TYPEDimensions (WkHkD): 292 mmk1185 mmk292 mm

(111/2qk4621/32qk111/2q)Mass (Weight): Approx. 2.6 kg (5.7 lbs)

CENTER SPEAKERWoofer: 6.5 cm (21/2q) CONE TYPEFull range: 6.5 cm (21/2q) CONE TYPEDimensions (WkHkD): 280 mmk84 mmk78 mm


SURROUND SPEAKERSFull range: 6.5 cm (21/2q) CONE TYPEDimensions (WkHkD): 80 mmk139 mmk70 mm


SUBWOOFERWoofer: 16 cm (61/2q) CONE TYPEDimensions (WkHkD): 180 mmk408 mmk300 mm


TERMINAL SECTION

USB slot: USB2.0: 2 systemSD card slot: Connector: 1 systemEthernet: 10BASE-T/100BASE-TX 1 systemWireless LAN: Standard Compliance:

IEEE802.11 b/g/nFrequency range: 2.4 GHz bandSecurity: WPATM/WPA2TM (Encryption Type: TKIP/AES, Authentication Type: PSK), WEP (64 bit/128 bit)

VIDEO SECTION

Signal system: NTSCVideo output

Output level: 1.0 Vp-p (75 ≠)Output connector: Pin jack (1 system)

HDMI AV output*Output connector: Type A (19 pin)

HDMI AV Input*Input connector: Type A (19 pin) 2 system

LASER SpecificationClass I LASER ProductWave length: 790 nm (CDs)/660 nm (DVDs)/405 nm (BDs)Laser power: No hazardous radiation is emitted

with the safety protection


50 VQT3X49

≥ With certain recording states and folder structures, the play order may differ or playback may not be possible.

Supplemental information∫ Display languages list

∫ Language code list

File format

File format Extension Reference

MP3 “.MP3”, “.mp3”This unit supports ID3 tags, but only titles, artist names and album names can be displayed.

JPEG “.JPG”, “.jpg”

≥ MOTION JPEG and Progressive JPEG is not supported

≥ You may not be able to play back the file if you have edited the folder structure or the file name on a PC or other device.

MKV

“.MKV”, “.mkv” ≥ The video file and subtitles text file are inside the same folder, and the file names are the same except for the file extensions.

≥ Some MKV files may not play back, depending on the video resolution and frame rate condition.

Subtitles text file“.SRT”, “.srt”, “.SSA”, “.ssa”, “.ASS”, “.ass”

FLAC “.flac” Maximum sampling rate:192 kHz/24 bit

WAV “.wav” Maximum sampling rate:48 kHz/16 bit

MPO “.mpo” 3D still picture

Restriction on use of unauthorized copied contentThis unit adopts the following technology for copyright protection.

Cinavia NoticeThis product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted.More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing address to:Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA.

Display Language Display Language Display Language

Language Code Language Code Language Code

ENGFRADEUITAESPNLDSVENORDANPORRUS

EnglishFrenchGermanItalianSpanishDutchSwedishNorwegianDanishPortugueseRussian

ARA HINPERINDMRIBULRUMGRETUR

JPNCHIKORMALVIETHAPOLCESSLKHUNFIN

JapaneseChineseKoreanMalayVietnameseThaiPolishCzechSlovakHungarianFinnish

ArabicHindiPersianIndonesianMaoriBulgarianRomanianGreekTurkishOthers

Abkhazian: 6566Afar: 6565Afrikaans: 6570Albanian: 8381Amharic: 6577Arabic: 6582Armenian: 7289Assamese: 6583Aymara: 6589Azerbaijani: 6590Bashkir: 6665Basque: 6985Bengali; Bangla:

6678Bhutani: 6890Bihari: 6672Breton: 6682Bulgarian: 6671Burmese: 7789Byelorussian: 6669Cambodian: 7577Catalan: 6765Chinese: 9072Corsican: 6779Croatian: 7282Czech: 6783Danish: 6865Dutch: 7876English: 6978Esperanto: 6979Estonian: 6984Faroese: 7079Fiji: 7074Finnish: 7073French: 7082Frisian: 7089Galician: 7176Georgian: 7565German: 6869Greek: 6976Greenlandic: 7576Guarani: 7178

Gujarati: 7185Hausa: 7265Hebrew: 7387Hindi: 7273Hungarian: 7285Icelandic: 7383Indonesian: 7378Interlingua: 7365Irish: 7165Italian: 7384Japanese: 7465Javanese: 7487Kannada: 7578Kashmiri: 7583Kazakh: 7575Kirghiz: 7589Korean: 7579Kurdish: 7585Laotian: 7679Latin: 7665Latvian, Lettish: 7686Lingala: 7678Lithuanian: 7684Macedonian: 7775Malagasy: 7771Malay: 7783Malayalam: 7776Maltese: 7784Maori: 7773Marathi: 7782Moldavian: 7779Mongolian: 7778Nauru: 7865Nepali: 7869Norwegian: 7879Oriya: 7982Pashto, Pushto: 8083Persian: 7065Polish: 8076Portuguese: 8084Punjabi: 8065Quechua: 8185

Rhaeto-Romance:8277

Romanian: 8279Russian: 8285Samoan: 8377Sanskrit: 8365Scots Gaelic: 7168Serbian: 8382Serbo-Croatian: 8372Shona: 8378Sindhi: 8368Singhalese: 8373Slovak: 8375Slovenian: 8376Somali: 8379Spanish: 6983Sundanese: 8385Swahili: 8387Swedish: 8386Tagalog: 8476Tajik: 8471Tamil: 8465Tatar: 8484Telugu: 8469Thai: 8472Tibetan: 6679Tigrinya: 8473Tonga: 8479Turkish: 8482Turkmen: 8475Twi: 8487Ukrainian: 8575Urdu: 8582Uzbek: 8590Vietnamese: 8673Volapük: 8679Welsh: 6789Wolof: 8779Xhosa: 8872Yiddish: 7473Yoruba: 8979Zulu: 9085


Refe

renc

e

51VQT3X49

THE FOLLOWING APPLIES IN THE U.S.A. AND CANADAThis device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.Contains FCC ID: MCLT77H330Contains IC:2878D-T77H330This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20cm (77/8q) or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).

THE FOLLOWING APPLIES ONLY IN THE U.S.A.FCC Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:≥ Reorient or relocate the receiving antenna.≥ Increase the separation between the equipment and receiver.≥ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.≥ Consult the dealer or an experienced radio/TV technician for help.FCC Caution:To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to peripheral devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.Declaration of ConformityTrade Name: PanasonicModel No.: SC-BTT490

Responsible Party:Panasonic Corporation of North AmericaOne Panasonic Way, Secaucus, NJ 07094Support Contact:Panasonic Consumer Marketing Company of North AmericaTelephone No.: 1-800-211-PANA (7262)

THE FOLLOWING APPLIES ONLY IN CANADA.This Class B digital apparatus complies with Canadian ICES-003.

THE FOLLOWING APPLIES ONLY IN CANADA.Product Identification Marking is located on the bottom of the unit.

Java is a registered trademark of Oracle and/or its affiliates.

Manufactured under license from Dolby Laboratories.Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.


52 VQT3X49

VIERA Connect is a trademark of Panasonic Corporation.

“AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/Progressive” are trademarks of Panasonic Corporation and Sony Corporation.

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered trademarks & DTS-HD Master Audio | Essential is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

This product is licensed under the AVC patent portfolio license and VC-1 patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC/VC-1 Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC.See http://www.mpegla.com.

HDAVI Control™ is a trademark of Panasonic Corporation.

VIERA Link™ is a trademark of Panasonic Corporation.

EZ Sync™ is a trademark of Panasonic Corporation.

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.

SDXC Logo is a trademark of SD-3C, LLC.

“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.

DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living Network Alliance.

Windows is a trademark or a registered trademark of Microsoft Corporation in the United States and other countries.

Skype, associated trade marks and logos and the “ ” logo are trade marks of Skype Limited.

The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.

“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct”, “WPA” and “WPA2” are marks or registered marks of the Wi-Fi Alliance.

“Made for iPod” , and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards.Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.Please note that the use of this accessory with iPod, or iPhone may affect wireless performance.iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.


Refe

renc

e

53VQT3X49

gSOAP Public License 1.3

Part of the software embedded in this product is gSOAP software.Portions created by gSOAP are Copyright (C) 2001-2009 Robert A. van Engelen, Genivia inc. All Rights Reserved.THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY GENIVIA INC AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

(1) MS/WMAThis product is protected by certain intellectual property rights of Microsoft Corporation and third parties. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.

(2) MS/PlayReady/Final Product LabelingThis product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft.

(3)MS/PlayReady/End User NoticesContent owners use Microsoft PlayReadyTM content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may requireMicrosoft to revoke the device’s ability to consume PlayReady-protected content. Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.

(4) VorbisThe software license is displayed when “License” in the Setup menu is selected.( 40)

(5) FLAC, WPA SupplicantThe software licenses are displayed when “License” in the Setup menu is selected.( 40)

This product incorporates the following software:

(1) the software developed independently by or for Panasonic Corporation,(2) the software owned by third party and licensed to Panasonic Corporation,(3) the software licensed under the GNU General Public License, Version 2 (GPL v2),(4) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL v2.1) and/or,(5) open sourced software other than the software licensed under the GPL v2 and/or LGPL v2.1

For the software categorized as (3) and (4), please refer to the terms and conditions of GPL v2 and LGPL v2.1, as the case may be athttp://www.gnu.org/licenses/old-licenses/gpl-2.0.html andhttp://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.In addition, the software categorized as (3) and (4) are copyrighted by several individuals. Please refer to the copyright notice of those individuals athttp://panasonic.net/avc/oss/bdplayer/AWBPP12.html

The GPL/LGPL software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

At least three (3) years from delivery of products, Panasonic will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL v2/LGPL v2.1.

Contact [email protected]

Source code is also freely available to you and any other member of the public via our website below.http://panasonic.net/avc/oss/bdplayer/AWBPP12.html

For the software categorized as (5) includes as follows.1. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit.

(http://www.openssl.org/)2. This product includes software developed by the University of California, Berkeley and its contributors.3. FreeType code.4. The Independent JPEG Group's JPEG software.

Copyright 2004-2010 Verance Corporation. CinaviaTM is a Verance Corporation trademark. Protected by U.S. Patent 7,369,677 and worldwide patents issued and pending under license from Verance Corporation. All rights reserved.


54 VQT3X49

Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO)Panasonic Consumer Marketing Company of North America, Division of Panasonic Corporation of North AmericaOne Panasonic Way, Secaucus, New Jersey 07094

Panasonic Blu-ray and DVD Products Limited WarrantyLimited Warranty Coverage (For USA and Puerto Rico Only)If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Marketing Company of North America (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.

During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States or Puerto Rico. This warranty is extended only to the original purchaser of a new product which was not sold “as is”.

Mail-In ServiceFor assistance in the U.S.A. and Puerto Rico in obtaining repairs, please ship the product prepaid to:

Panasonic Exchange Center4900 George McVay DriveSuite BMcAllen, TX [email protected]

When shipping the unit, carefully pack, include all supplied accessories listed in the Owner’s Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at www.panasonic.com/BatteryHandling as Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty.

IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.

Limited Warranty Limits And ExclusionsThis warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids,

commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.)ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to the warrantor’s Consumer Affairs Department at the addresses listed for the warrantor.

PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.

As of January 2012User memo:

Product or Part Name Parts Labor

Blu-ray Disc Player, Portable Blu-ray Disc Player 1 year 90 days

Blu-ray Home Theater System 1 year 1 year

DVD Player, Portable DVD Player 1 year 90 days

DVD Recorder 1 year 90 days

Rechargeable Batteries (pack) 90 days NotApplicable

Customer Services Directory (United States and Puerto Rico)

Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchaseParts and Accessories; or make Customer Service andLiterature requests by visiting our Web Site at:http://www.panasonic.com/helpor, contact us via the web at:http://www.panasonic.com/contactinfoYou may also contact us directly at:1-800-211-PANA (7262)Monday-Friday 9am-9pm, Saturday-Sunday 10am-7pm EST

For hearing or speech impaired TTY users, TTY: 1-877-833-8855

Accessory Purchases (United States and Puerto Rico)

Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at:http://www.pstc.panasonic.comOr, send your request by E-mail to:[email protected] may also contact us directly at:1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday-Friday 9am-9pm EST)Panasonic National Parts Center20421 84th Ave S., Kent, WA 98032(We accept Visa, MasterCard, Discover Card, American Express)

For hearing or speech impaired TTY users, TTY: 1-866-605-1277

The model number and serial number of this product can be found on either the back or the bottom of the unit.Please note them in the space provided below and keep forfuture reference.

MODEL NUMBER SC-BTT490

SERIAL NUMBER

DATE OF PURCHASE DEALER NAME DEALER ADDRESS

TELEPHONE NUMBER


Refe

renc

e

55VQT3X49

Limited Warranty (Only for CANADA)Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario L4W 2T3

PANASONIC PRODUCT - LIMITED WARRANTY

Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by Panasonic Canada Inc.

Technics Audio Product - One (1) year, parts and labourPanasonic BD/DVD Product - One (1) year, parts and labourPanasonic Audio Receivers - One (1) year, parts and labourHome Theater Systems Product - One (1) year, parts and labour

This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original packaging.

IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIRED

LIMITATIONS AND EXCLUSIONS

This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than an Authorized Servicer, or damage that is attributable to acts of God.

Dry cell batteries are also excluded from coverage under this warranty.

THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is not exhaustive, but for illustration only.)

In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific legal rights and you may have other rights which vary depending on your province or territory.

WARRANTY SERVICEFor product operation and information assistance, please contact:

PRODUCT OPERATION ASSISTANCECustomer Care Centre: Telephone #: 1-800-561-5505

Fax #: (905) 238-2360Email link: “Support # contact us # email” on www.panasonic.ca

PRODUCT REPAIRSPlease locate your nearest Authorized Servicentre.

Link: “Support # Panasonic Servicentre® locator” on www.panasonic.ca

IF YOU SHIP THE PRODUCT TO A SERVICENTRECarefully pack and send prepaid, adequately insured and preferably in the original carton.

Include details of the defect claimed, and proof of date of original purchase.


As an ENERGY STAR Partner, Panasonichas determined that this product meets the ENERGY STAR guidelines for energy efficiency.

®

®

For Canada only: The word “Participant” is used in place of the word “Partner”.

Panasonic Corporation 2012Printed in Malaysia

5770 Ambler Drive Mississauga, OntarioL4W 2T3www.panasonic.ca

Panasonic Canada Inc.

One Panasonic Way, Secaucus, New Jersey 07094http://www.panasonic.com

Panasonic Consumer Marketing Company of North America, Division of Panasonic Corporation of North America

Panasonic CorporationCorporate Management Division For North America Sales Team1-61, Shiromi 2-Chome, Chuo-ku, Osaka City 540-6255, Japan

IndexAAudio

Changing audio . . . . . . . . 23Language . . . . . . . . . . 32, 37

BBD-Live. . . . . . . . . . . . . . . . .24DDLNA . . . . . . . . . . . . . . . . . .31FFile format . . . . . . . . . . . . . .50Firmware update . . . . . . . . .19IiPod/iPhone . . . . . . . . . . . . .25LLAN. . . . . . . . . . . . . . . . . . . .17

LanguageAudio . . . . . . . . . . . . . . . . 37Menu. . . . . . . . . . . . . . . . . 38On-screen. . . . . . . . . . . . . 38Soundtrack. . . . . . . . . . . . 32Subtitle . . . . . . . . . . . . 32, 37

MMedia Renderer . . . . . . . . . 31Multi User Mode . . . . . . . . . 22NNetwork

Connection. . . . . . . . . . . . 17Setting . . . . . . . . . . . . 18, 38

PPop-up menu . . . . . . . . . . . 24QQuick Start . . . . . . . . . . . . . 40

RRadio . . . . . . . . . . . . . . . . . .29Re-master. . . . . . . . . . . . . . .34Restore Default Settings. . .40Resume play function . . . . .23S

Subtitle . . . . . . . . . . . . . . . . .32UUSB device. . . . . . . . . . . . . . .7VVIERA Connect . . . . . . . . . .30VIERA LinkTM “HDAVI ControlTM”. . . . . . . . . . . . . . .27WWireless LAN . . . . . . . . . . . .1724p . . . . . . . . . . . . . . . . .33, 363D . . . . . . . . . . . . . . . . . . . . .24

VQT3X49-3F1211SB3022

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union.If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.

THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION

CAUTION : TO REDUCE THE RISK OF ELECTRICSHOCK, DO NOT REMOVE SCREWS.NO USER-SERVICEABLE PARTSINSIDE.REFER SERVICING TO QUALIFIEDSERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

RISK OF ELECTRIC SHOCKDO NOT OPEN


Documents

Manual de Teatro en Casa Nuevo Panasonic