8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 1/152
®
Internal HexagonProduct Catalog, 2011
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 3/152
MIS offers technicians a range of innovative
tools that ease and simplify lab work, and
help reach higher accuracy in every case.
© MIS Corporation. All rights Reserved.
MIS, vision is to produce user-friendly implants
and superstructures that offer clinicians simple
and creative procedures and keep our customers
continuously smiling.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 4/152
Implants System
UNO 6 - 9
BIOCOM 10 - 16
SEVEN 17 - 24
Mountless 25
LINK Orthodontic Implants 26 - 27
Packaging 28-29
Surgical InstrumentsDrills - Internal Irrigation 32-33
Drills - External Irrigation 34
Drills 35
Ceramic Drills - External Irrigation 36
Trephine Burs 37
Surgical Tools - UNO 38
Surgical Tools 39
Surgical Instruments 40-41
KitsAdvanced Surgical Instrument Kit 44 - 45
Prosthetic Tools Kit 46 - 47Drill Stopper Kit 48
Yeung Bone Harvest Kit 49
Crest Widener Kit 50 - 51
Abrahami Drill Guide Kit 52 - 53
Bone Compression Kit 54 - 55
UNO Implant Surgical Kit 56 - 58
Mountless Basic Surgical Kit 59
Organizer Kit 60
Convex Osteotomes Set 61
Osteotomes Set 62
Sinus Lift Osteotomes Set 63
Accessories
Narrow Platform 66-72
UNO Narrow - Ball Attachment 66Analog and Impression Coping 67
NPK - Narrow Prosthetic Kit 68-69
Direct System - Screw Retained Reconstruction 70
Direct System - Cemented Reconstruction 71
Ball Attachment System 72
Standard Platform 73-93
Analogs and Impression Coping 73
CPK - Complete Prosthetic Kit 74-75
RA Technical Kit 76-77
RA - Gold Base Kit 78-79
PBK - Plastic Base Kit 80-81
2.
Table of Contents
Implant Systems4-29
Surgical Instruments30-41
Kits
42-63
Prosthetic64-105
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 5/152
Direct System - Screw Retained Reconstruction 82
Direct System - Cemented Reconstruction 83-85
Multi-Unit System 86-88
Ball Attachment System 89-91
Locator Attachments System 92-93
Wide Platform 94-104
Analog and Impression Coping 94-95
CPK - Complete Prosthetic Kit 96-97
Direct System - Screw Retained Reconstruction 98
Direct System - Cemented Reconstruction 99-100
Multi-Unit System 101
Ball Attachment System 102
Locator Attachments System 103-104
Bars - Reconstruction System 105
Prosthetic Instruments 108-109
Prosthetic Planning Kit 110-111MIS-MCU Control Unit 112-113
Crown Set 114
Abutment Holding System Kit 115
Zircon Diamond Burr Set 116
MGUIDE Surgical Kit 117-121
4BONE - Synthetic Bone Substitute 123-124
4Bone RCM 125
Bone Graft Materials and Membranes 126
Material Compositions 127
Index 130-146Restorative Components Table 147
Accessories
106-121
Bone Graft122-127
Index 128-147
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 7/152
Implant systems.
The wide range of MIS implant product lines provides a variety of clinical
solutions such as reconstruction of a single tooth, screw-retained or cemented
xed bridges and overdentures. Furthermore, MIS implants can be used in
any surgical and bone augmentation procedures, from the simplest to the
most intricate. All MIS implants adhere to the highest international standards
and have ISO, and CE approvals. They are made of biocompatible medical
grade titanium, and their surface is dual-roughed by sand blasting and acid-
etching procedures.
The MIS self-tapping Seven Implants are especially designed for implantation in a wide rangeof bone types and bone augmentation procedures. Their new geometric design includes dualthreads, three spiral channels stemming from the apex, micro rings on the implants’ neck,and a changing thread thickness along the implant. A ll MIS Seven implants are supplied witha single use nal drill for reducing the heat produced during drilling, resulting in improvedosseointegration.
MIS BioCom Implants are titanium cylinder screw type implants that are designed for bothtwo-stage and single stage procedures. They are self tapping with a unique wide thread design,and tapered threads on their apical part.
MIS UNO unique implants are specically engineered for narrow ridges and tight spaces.The insertion of the UNO implant is a quick and simple one stage procedure. Due to theirinnovative geometries and advanced surface morphology these unique implants offer highinitial stability. These versatile implants can be used to restore single crowns and anteriorcemented bridges.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 8/152
Ø3
mm
Ø 3mm
Ø3.50
mm
One Piece
Narrow
Screw type implant range
Screw type implant range
16mm
16mm
11.50mm
11.50mm
10mm
10mm
13mm
13mm
Length
Length
Type
Type
MO1-10300
MO2-10300
MO1-10350
MO1-11300
MO2-11300
MO1-11350
MO1-16300
MO2-16300
MO1-16350
MO1-13300
MO2-13300
MO1-13350
6.
MT-HKO21
MT-HKL21
UNO One Piece implant insertion tool
UNO One Piece implant long key
MT-HKS15UNO One Piece implant short key
(For more info please see page no. 38)Surgical tools
Hex. ratchet short adapter forint. hex. connection
MT-MRH20
MT-MRH10
Hex. ratchet long adapter forint. hex. connection
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 9/152
Drill Speed(RPM)
Diameter
Dimensions
Procedure recommended by MIScannot replace the judgment and theexperience of the surgeon.
Catalog No.
Implant Procedure
Ø
2.7mm
6.3mm
3
L
UNO One Piece Implant
3mmOne Piece
Ø3mm
1200-1500
Ø1.90
900-1200
Ø2
700-900
Ø2.40
15-25
Ø3
Titanium Alloy Ti 6Al 4V ELI
Implant: Sand Blasted and Acid-EtchedAbutment: Acid Etched
MO1-10300Ø3mm
length 10mm
MO1-11300Ø3mm
length 11.50mm
MO1-13300Ø3mm
length 13mm
MO1-16300
Ø3mm
length 16mm
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 10/152
Implant Procedure
Drill Speed(RPM)
Diameter
Procedure recommended by MIScannot replace the judgment and theexperience of the surgeon.
Catalog No. Dimensions
Ø
2.7mm
6.3mm
3.50
L
UNO One Piece Implant
Ø3.50mmOne Piece
Ø3.50mm
1200-1500
Ø1.90
900-1200
Ø2
700-900
Ø2.40
700-400
Ø3
15-25
Ø3.50
Titanium Alloy Ti 6Al 4V ELI
Implant: Sand Blasted and Acid-EtchedAbutment: Acid Etched
MO1-10350Ø3.50mm
length 10mm
MO1-11350Ø3.50mm
length 11.50mm
MO1-13350Ø3.50mm
length 13mm
MO1-16350
Ø3.50mm
length 16mm
8.8.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 11/152
Drill Speed(RPM)
Diameter
Catalog No. Dimensions
Implant Procedure
L
2mm
UNO Narrow Implant
Ø3mmNarrow Implant
Ø3mm
1200-1500
Ø1.90
900-1200
Ø2
700-900
Ø2.40
15-25
Ø3
Titanium Alloy Ti 6Al 4V ELI
Sand Blasted and Acid-Etched
MO2-10300Ø3mm
length 10mm
MO2-11300Ø3mm
length 11.50mm
MO2-13300Ø3mm
length 13mm
MO2-16300
Ø3mm
length 16mm
(For more info please see page no. 66)
Procedure recommended by MIScannot replace the judgment and theexperience of the surgeon.
Narrow ball attachment key
UNO ball anchor screw 0.5mm
UNO ball anchor screw 1.5mm
Surgical tools
MH-N0442
MT-NB225
UNO ball anchor screw 2.5mmMB-NR025
MB-NR005
MB-NR015
UNO Narrow healing cap
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 12/152
13mm11.50mm8mm 10mm6mmLength 16mm
Available in gingival heights: 3,4,5,6mm
Implant cover screwsand healing caps
Standard PlatformScrew type implant range
Ø3.30mm
MF4-10330
MF4-11330
MF4-13330
MF4-16330
Ø3.75mm
MF4-08375
MF4-10375
MF4-11375
MF4-13375
MF4-16375
Ø4.20mm
MF4-06420
MF4-08420
MF4-10420
MF4-11420
MF4-13420
MF4-16420
MC1-00375
MH-03375
MH-04375
MH-05375
MH-06375
3/4/5/6mm
Ø 4mm
MH-53375
MH-54375
MH-55375MH-56375
3/4/5/6mm
Ø 5.5mm
Type
10.
(For more info please see page no. 39)
Hex. ratchet short adapterfor int. hex. connection
Short motor adapterfor int. hex. connection
Long motor adapterfor int. hex. connection
Surgical tools
MT-MRH20
MT-MRH10
Hand key for int. hex. connectionMT-HHK24
MT-MMH10
MT-MMH20
Hex. ratchet long adapterfor int. hex. connection
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 13/152
Procedure recommended by MIScannot replace the judgment and theexperience of the surgeon.
Drill Speed(RPM)
Diameter
Catalog No. Dimensions
Implant Procedure
Ø 3.75
Ø 3.30
L
2.45
BioCom internal hex. Implant
Ø3.30mmStandard Platform
Ø3.30mm
1200-1500
Ø1.90
900-1200
Ø2
Ø2
500-700
Ø2.80
Ø2.80
200-500
Ø3.30-Ø3.75
15-25
Ø3.30
Titanium Alloy Ti 6Al 4V ELI
Sand Blasted and Acid-Etched
MF4-10330Ø3.30mm
length 10mm
MF4-11330Ø3.30mm
length 11.50mm
MF4-13330Ø3.30mm
length 13mm
MF4-16330
Ø3.30mm
length 16mm
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 14/152
Catalog No. Dimensions
Procedure recommended by MIScannot replace the judgment and theexperience of the surgeon.
Drill Speed(RPM)
Diameter
Implant Procedure
2.45
Ø 3.75
Ø 3.75
L
BioCom internal hex. Implant
Ø3.75mmStandard Platform
Ø3.75mm
1200-1500
Ø1.90
900-1200
Ø2
Ø2
500-700
Ø2.80
400-700
Ø3.20
Ø3.20
200-500
Ø3.75
15-25
Ø3.75
Titanium Alloy Ti 6Al 4V ELI
Sand Blasted and Acid-Etched
MF4-08375Ø3.75mm
length 8mm
MF4-10375Ø3.75mm
length 10mm
MF4-11375Ø3.75mm
length 11.50mm
MF4-13375
Ø3.75mm
length 13mm
MF4-16375Ø3.75mm
length 16mm
12.12.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 15/152
Catalog No. Dimensions
Procedure recommended by MIScannot replace the judgment and theexperience of the surgeon.
Drill Speed(RPM)
Diameter
Implant Procedure
2.45
0.4mm
Ø 3.75
Ø4.20
L
BioCom internal hex. Implant
Ø4.20mmStandard Platform
Ø4.20mm
1200-1500
Ø1.90
900-1200
Ø2
Ø2
500-700
Ø2.80
400-700
Ø3.20
200-500
Ø3.80
Ø3.80
200-500
Ø4.20
15-25
Ø4.20
Titanium Alloy Ti 6Al 4V ELI
Sand Blasted and Acid-Etched
MF4-06420Ø4.20mm
length 6mm
MF4-08420Ø4.20mm
length 8mm
MF4-10420Ø4.20mm
length 10mm
MF4-11420
Ø4.20mm
length 11.50mm
MF4-13420Ø4.20mm
length 13mm
MF4-16420Ø4.20mm
length 16mm
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 16/152
13mm 16mm11.50mm8mm6mm 10mmLength
Available in gingival heights: 3,4,5mm
Implant cover screwsand healing caps
Screw type implant range
Ø5mm
MF4-06500
MF4-08500
MF4-10500
MF4-11500
MF4-13500
MF4-16500
Ø6mm
MF4-06600
MF4-08600
MF4-10600
MF4-11600
MF4-13600
MH-W3500
MH-W4500
MH-W55003/4/5mm
Ø 5mm
MC1-00470
MH-W3630
MH-W4630MH-W5630
3/4/5mm
Ø 6.3mm
Type
Wide Platform
14.
(For more info please see page no. 39)
Hex. ratchet short adapterfor int. hex. connection
Short motor adapterfor int. hex. connection
Long motor adapterfor int. hex. connection
Surgical tools
MT-MRH20
MT-MRH10
Hand key for int. hex. connectionMT-HHK24
MT-MMH10
MT-MMH20
Hex. ratchet long adapterfor int. hex. connection
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 17/152
Catalog No. Dimensions
Drill Speed(RPM)
Diameter
Implant Procedure
0.4mm
Ø4.50
Ø5
L
2.45
BioCom internal hex. Implant
Ø5mmWide Platform
Ø5mm
1200-1500
Ø1.90
900-1200
Ø2
Ø2
500-700
Ø2.80
400-700
Ø3.20
400-600
Ø3.80
400-600
Ø4.50
Ø4.50
200-500
Ø5
15-25
Ø5
Titanium Alloy Ti 6Al 4V ELI
Sand Blasted and Acid-Etched
MF4-06500Ø5mm
length 6mm
MF4-08500Ø5mm
length 8mm
MF4-10500Ø5mm
length 10mm
MF4-11500
Ø5mm
length 11.50mm
MF4-13500Ø5mm
length 13mm
MF4-16500Ø5mm
length 16mm
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 18/152
Catalog No.
Drill Speed(RPM)
Diameter
Dimensions
Implant Procedure
0.4mmØ 4.50
Ø 6
L
2.45
BioCom internal hex. Implant
Ø6mmWide Platform
Ø6mm
1200-1500
Ø1.90
900-1200
Ø2
Ø2
500-700
Ø2.80
400-700
Ø3.20
400-600
Ø3.80
400-600
Ø4.50
300-500
Ø5
300-500
Ø5.50
Ø5.50
200-500
Ø6
15-25
Ø6
Titanium Alloy Ti 6Al 4V ELI
Sand Blasted and Acid-Etched
MF4-06600Ø6mm
length 6mm
MF4-08600Ø6mm
length 8mm
MF4-10600Ø6mm
length 10mm
MF4-11600
Ø6mm
length 11.50mm
MF4-13600Ø6mm
length 13mm
16.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 19/152
13mm 16mm11.50mm8mm6mm 10mmLength
Ø3.30mm
MF7-10330
MF7-11330
MF7-13330
MF7-16330
MC1-00330
MH-N2330
MH-N3330
MH-N4330
2/3/4mm
Ø 4mm
Available in gingival heights: 2,3,4mm
Implant cover screwsand healing caps
Narrow PlatformScrew type implant range
®
Type
(For more info please see page no. 39)
Surgical tools
MT-MRH20 Hex. ratchet long adapter for int. hex. connection
Hex. ratchet short adapter for int. hex. connectionMT-MRH10
MT-HHK24
Short motor adapter for int. hex. connectionMT-MMH10
Long motor adapter for int. hex. connectionMT-MMH20
MT-NRH20 Hex. ratchet long adapter for int. hex. connection, NP
Hand key for int. hex. connection
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 20/152
Catalog No. Dimensions
Procedure recommended by MIScannot replace the judgment and theexperience of the surgeon.
Drill Speed(RPM)
Diameter
Implant Procedure
Ø 2.40
Ø 3.30
2.10
Ø 2.20
Ø 3.20
Seven internal hex. Implant
Ø3.30mmNarrow Platform
Ø3.30mm
®
1200-1500
Ø1.90
900-1200
Ø2
Ø2
500-700
Ø2.40
200-400
Ø2.20-Ø3.20
15-25
Ø3.30
Titanium Alloy Ti 6Al 4V ELI
Sand Blasted and Acid-Etched
MF7-10330Ø3.30mm
length 10mm
MF7-11330Ø3.30mm
length 11.50mm
MF7-13330Ø3.30mm
length 13mm
MF7-16330
Ø3.30mm
length 16mm
Final Drill
A specially designed nal drill for 10mm,11.50mm, 13mm and 16mm implants issupplied with every implant, allowing ashort and safe drilling procedure.
For bonetype 1&2
Final drill
18.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 21/152
13mm 16mm11.50mm8mm6mm 10mmLength
Ø3.75mm
MF7-08375
MF7-10375
MF7-11375
MF7-13375
MF7-16375
Ø 4.20mm
MF7-06420
MF7-08420
MF7-10420
MF7-11420
MF7-13420
MF7-16420
MC1-00375
MH-03375
MH-04375
MH-05375
MH-06375
3/4/5/6mm
Ø 4mm
MH-53375
MH-54375
MH-55375MH-56375
3/4/5/6mm
Ø 5.5mm
Type
®
Standard PlatformScrew type implant range
Available in gingival heights: 3,4,5,6mm
Implant cover screwsand healing caps
(For more info please see page no. 39)
Hex. ratchet short adapterfor int. hex. connection
Short motor adapterfor int. hex. connection
Long motor adapterfor int. hex. connection
Surgical tools
MT-MRH20
MT-MRH10
Hand key for int. hex. connectionMT-HHK24
MT-MMH10
MT-MMH20
Hex. ratchet long adapterfor int. hex. connection
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 22/152
Catalog No. Dimensions
Procedure recommended by MIScannot replace the judgment and theexperience of the surgeon.
Drill Speed(RPM)
Diameter
Implant Procedure
Ø 3.10
Ø 3.75
2.45
Ø 2.80
Ø 3.60
Seven internal hex. Implant
Ø3.75mmStandard Platform
Ø3.75mm
®
1200-1500
Ø1.90
900-1200
Ø2
Ø2
500-700
Ø2.80
200-400
Ø2.80-Ø3.60
200-500
Ø3.75
15-25
Ø3.75
Titanium Alloy Ti 6Al 4V ELI
Sand Blasted and Acid-Etched
MF7-08375Ø3.75mm
length 8mm
MF7-10375Ø3.75mm
length 10mm
MF7-11375Ø3.75mm
length 11.50mm
MF7-13375
Ø3.75mm
length 13mm
MF7-16375Ø3.75mm
length 16mm
Final Drill
A specially designed nal drill for 8mm,10mm, 11.50mm, 13mm and 16mm implantsis supplied with every implant, allowing ashort and safe drilling procedure.
20.
For bonetype 1&2
For bonetype 3&4
Final drill
OR
Countersink (MT-GDN33)
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 23/152
Catalog No. Dimensions
Procedure recommended by MIScannot replace the judgment and theexperience of the surgeon.
Drill Speed(RPM)
Diameter
Implant Procedure
Ø3.30
Ø4.10
Ø 3.70
Ø 3.75
2.45
0.4mm
Ø4.20
Seven internal hex. Implant
Ø4.20mmStandard Platform
Ø4.20mm
®
1200-1500
Ø1.90
900-1200
Ø2
Ø2
500-700
Ø2.80
400-700
Ø3.20
200-400
Ø3.30-Ø4.10
200-500
Ø4.20
15-25
Ø4.20
Titanium Alloy Ti 6Al 4V ELI
Sand Blasted and Acid-Etched
MF7-06420Ø4.20mm
length 6mm
MF7-08420Ø4.20mm
length 8mm
MF7-10420Ø4.20mm
length 10mm
MF7-11420
Ø4.20mm
length 11.50mm
MF7-13420Ø4.20mm
length 13mm
MF7-16420Ø4.20mm
length 16mm
Final Drill
A specially designed nal drill for 6mm,8mm, 10mm, 11.50mm, 13mm and 16mmimplants is supplied with every implant,allowing a short and safe drilling procedure.
For bonetype 1&2
For bonetype 3&4
Final drill
OR
Countersink
(MT-GDN33)
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 24/152
13mm 16mm11.50mm8mm6mm 10mmLength
Available in gingival heights: 3,4,5mm
Implant cover screwsand healing caps
®
Wide PlatformScrew type implant range
Ø5mm
MF7-06500
MF7-08500
MF7-10500
MF7-11500
MF7-13500
MF7-16500
Ø6mm
MF7-06600
MF7-08600
MF7-10600
MF7-11600
MF7-13600
MC1-00470
MH-W3630
MH-W4630
MH-W56303/4/5mm
Ø 6.3mm
MH-W3500
MH-W4500MH-W5500
3/4/5mm
Ø 5mm
Type
22.
MH-W3500
MH-W4500
MH-W5500
3/4/5mm
Ø 5mm
MH-W3630
MH-W4630
MH-W5630
3/4/5mm
Ø 6.3mm
(For more info please see page no. 39)
Hex. ratchet short adapterfor int. hex. connection
Short motor adapterfor int. hex. connection
Long motor adapterfor int. hex. connection
Surgical tools
MT-MRH20
MT-MRH10
Hand key for int. hex. connectionMT-HHK24
MT-MMH10
MT-MMH20
Hex. ratchet long adapterfor int. hex. connection
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 25/152
Catalog No. Dimensions
Procedure recommended by MIScannot replace the judgment and theexperience of the surgeon.
Drill Speed(RPM)
Diameter
Implant Procedure
Ø 4.50
Ø 4.50
0.4mm
Ø 4.10
Ø 4.90
2.45
Ø 5
Seven internal hex. Implant
Ø5mmWide Platform
Ø5mm
®
1200-1500
Ø1.90
900-1200
Ø2
Ø2
500-700
Ø2.80
400-700
Ø3.20
400-600
Ø3.80
200-400
Ø4.10-Ø4.90
200-500
Ø5
15-25
Ø5
Titanium Alloy Ti 6Al 4V ELI
Sand Blasted and Acid-Etched
MF7-06500Ø5mm
length 6mm
MF7-08500Ø5mm
length 8mm
MF7-10500Ø5mm
length 10mm
MF7-11500
Ø5mm
length 11.50mm
MF7-13500Ø5mm
length 13mm
MF7-16500Ø5mm
length 16mm
Final Drill
A specially designed nal drill for 6mm,8mm, 10mm, 11.50mm, 13mm and 16mmimplants is supplied with every implant,allowing a short and safe drilling procedure.
For bonetype 1&2
For bonetype 3&4
Final drill
OR
Countersink
MT-GDN50
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 26/152
Dimensions
Drill Speed(RPM)
Diameter
Catalog No.
Implant Procedure
Ø 5.10
Ø 4.50
Ø 5.50
Ø 6
0.4mm
Ø 5.90
2.45
Seven internal hex. Implant
Ø6mmWide Platform
Ø6mm
®
1200-1500
Ø1.90
900-1200
Ø2
Ø2
500-700
Ø2.80
400-700
Ø3.20
400-600
Ø3.80
400-600
Ø4.50
300-500
Ø5
200-400
Ø5.10-Ø5.90
200-500
Ø6
15-25
Ø6
Titanium Alloy Ti 6Al 4V ELI
Sand Blasted and Acid-Etched
MF7-06600Ø6mm
length 6mm
MF7-08600Ø6mm
length 8mm
MF7-10600Ø6mm
length 10mm
MF7-11600
Ø6mm
length 11.50mm
MF7-13600Ø6mm
length 13mm
Final Drill
A specially designed nal drill for 6mm,8mm, 10mm, 11.50mm and 13mm implantsis supplied with every implant, allowing ashort and safe drilling procedure.
For bone For bone
Final drill
OR
Countersink
MT-GDN50
24.24.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 27/152
All MIS implants are supplied without the blue xture mounts.They are packaged in distinctive and easily recognizable boxes.
Mountless
Mountless Tube
MT-MRH20Hex. Ratchet Long Adapter
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 28/152
Ø 1.60mm
OrthodonticAnchor Screw
Screw range
12mm8mm6mm 10mmLength
Type
MG2-06160 MG2-08160 MG2-12160MG2-10160
A revolutionary ortho anchor systemfor improving anchorage and efcientlyfacilitating better results.
26.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 29/152
Link Tools
MT-CDS20
MT-HDS10
MT-CDS10
MT-SHD10
MT-OS100
Ortho anchor pilot drill 1mmMT-TDO01
Cross drive shaft for screw driver
Hex. driver shaft for screwdriver body
Cross driver shaft for contra angle
Ortho screwdriver
Short hex. driver shaft for contra angle
Ø1.6mm
Titanium Alloy Ti 6Al 4V ELI
Orthodontic Anchor Screw
The Links specially engineered tools will allow simple, smooth and quick insertionor extraction of all standard Link orthodontic anchor screws. Insertion or extractioncan be done safely and effectively either by hand or motor drive.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 30/152
The implant packaging allows a convenient,logical arrangement in the drawer andimmediate identication of the parts.
Packaging.
Mountless special
identication strips.
Implant identication markings
Quick identication of implant sizeand length. Upper number representsthe implant diameter, while the lowerrepresents implant length.
The new packaging is designed for easy identication and use of our newmountless implants. Quick identication features include distinctive colorcoded boxes, large easy to read lettering and a bright yellow strip whichspecically identies the product as mountless. Added features include apull tab, for quick and easy opening and newly designed polystyrene tubesfor quick and easy extraction of the implants.
Easy pulling tab
The pull out tab is easily identied whichfacilitates quick and easy opening.
Packaging
28.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 31/152
Implant identication markings:
Light Gray Ø3 UNO One Piece / UNO Narrow
Gray Ø3.50 One Piece
Red Ø3.75 Standard
Blue Ø4.20 Standard
Green Ø5 Wide
White Ø6 Wide
Yellow Ø3.30 Narrow/Standard
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 32/152
30.
Implant system.
30.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 33/152
MIS offers technicians a range of innovative tools
that ease and simplify lab work, and help reach
higher accuracy in every case.
Surgical instruments.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 34/152
Drills - Internal Irrigation
1 MT-TD200
1:1
2 MT-TD240
1:1
3 MT-TD280
1:1
4 MT-TD300
1:1
5 MT-TD320
1:1
6 MT-TD350
1:1
7 MT-TD380
1:1
8 MT-TD450
1:1
9 MT-TD500
1:1
10 MT-TD550
1:1
MT-TD200Pilot drill 2mm
1
Dimensions: length - 37.3mmDiameter - 2mm
Material: Stainless steel
MT-TD240Twist drill 2.40mm
2
Dimensions: length - 37.5mmDiameter - 2.40mm
Material: Stainless steel
MT-TD280Twist drill 2.80mm
3
Dimensions: length - 37.5mmDiameter - 2.80mm
Material: Stainless steel
MT-TD300Twist drill 3mm
4
Dimensions: length - 37.6mmDiameter - 3mm
Material: Stainless steel
MT-TD320Twist drill 3.20mm
5
Dimensions: length - 37.6mmDiameter - 3.20mm
Material: Stainless steel
MT-TD350Twist drill 3.50mm
6
Dimensions: length - 37.7mmDiameter - 3.50mm
Material: Stainless steel
MT-TD380Twist drill 3.80mm
7
Dimensions: length - 37.8mmDiameter - 3.80mm
Material: Stainless steel
MT-TD450Twist drill 4.50mm
8
Dimensions: length - 38.2mmDiameter - 4.50mm
Material: Stainless steel
MT-TD500Twist drill 5mm
9
Dimensions: length - 38.2mmDiameter - 5mm
Material: Stainless steel
MT-TD550Twist drill 5.50mm
10
Dimensions: length - 38.2mmDiameter - 5.5mm
Material: Stainless steel
32.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 35/152
Drills - Internal Irrigation
1 MT-TDS20
1:1
2 MT-TDS28
1:1
3 MT-TDS32
1:1
4 MT-TDS38
1:1
5 MT-TDS45
1:1
6 MT-TDS50
1:1
7 MT-TDS55
1:1
MT-TDS20Pilot drill 2mm short
1
Dimensions: length - 26.7mmDiameter - 2mm
Material: Stainless steel
MT-TDS28Twist drill 2.80mm short
2
Dimensions: length - 28.4mmDiameter - 2.80mm
Material: Stainless steel
MT-TDS32Twist drill 3.20mm short
3
Dimensions: length - 28.5mmDiameter - 3.20mm
Material: Stainless steel
MT-TDS38Twist drill 3.80mm short
4
Dimensions: length - 28.7mmDiameter - 3.80mm
Material: Stainless steel
MT-TDS45Twist drill 4.50mm short
5
Dimensions: length - 28.9mmDiameter - 4.50mm
Material: Stainless steel
MT-TDS50Twist drill 5mm short
6
Dimensions: length - 29.1mmDiameter - 5mm
Material: Stainless steel
MT-TDS55Twist drill 5.50mm short
7
Dimensions: length - 29.1mmDiameter - 5.5mm
Material: Stainless steel
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 36/152
Drills - External Irrigation
1 MT-TDN20
1:1
2 MT-TDN24
1:1
3 MT-TDN28
1:1
4 MT-TDN30
1:1
5 MT-TDN32
1:1
6 MT-TDN35
1:1
7 MT-TDN38
1:1
8 MT-TDN45
1:1
9 MT-TDN50
1:1
10 MT-TDN55
1:1
MT-TDN20Pilot drill 2mmexternal irrigation
1
Dimensions: length - 37.3mmDiameter - 2mm
Material: Stainless steel
MT-TDN24Twist drill 2.40mmexternal irrigation
2
Dimensions: length - 37.5mmDiameter - 2.40mm
Material: Stainless steel
MT-TDN28Twist drill 2.80mmexternal irrigation
3
Dimensions: length - 37.5mmDiameter - 2.80mm
Material: Stainless steel
MT-TDN30Twist drill 3mmexternal irrigation
4
Dimensions: length - 37.6mmDiameter - 3mm
Material: Stainless steel
MT-TDN32Twist drill 3.20mmexternal irrigation
5
Dimensions: length - 37.6mmDiameter - 3.20mm
Material: Stainless steel
MT-TDN35Twist drill 3.50mmexternal irrigation
6
Dimensions: length - 37.7mmDiameter - 3.50mm
Material: Stainless steel
MT-TDN38Twist drill 3.80mmexternal irrigation
7
Dimensions: length - 37.8mmDiameter - 3.80mm
Material: Stainless steel
MT-TDN45Twist drill 4.50mmexternal irrigation
8
Dimensions: length - 38.2mmDiameter - 4.50mm
Material: Stainless steel
MT-TDN50Twist drill 5mmexternal irrigation
9
Dimensions: length - 38.2mmDiameter - 5mm
Material: Stainless steel
MT-TDN55Twist drill 5.50mmexternal irrigation
10
Dimensions: length - 38.2mmDiameter - 5.50mm
Material: Stainless steel
34.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 37/152
Drills
1 MT-TDN19
1:1
2 MT-TD110
1:1
3 MT-SMD10
1:1
4 MT-GDN33
1:1
5 MT-GDN50
1:1
MT-TDN19Marking drill 1.90mmexternal irrigation
1
Dimensions: length - 34mmDiameter - 1.90mm
Material: Stainless steel
MT-TD110Marking drill 1.90mm
2
Dimensions: length - 34mmDiameter - 1.90mm
Material: Stainless steel
MT-SMD10Spade marking drill
3
Dimensions: length - 27.5mmMaterial: Stainless steel
MT-GDN33Countersink forstandard platform
4
Dimensions: length - 26mmØ3.75mm/ Ø4.20mm
Material: Stainless steel
MT-GDN50Countersink forwide platform
5
Dimensions: length - 26.8mmØ5mm / Ø6mm
Material: Stainless steel
MT-GDN50Countersink for wide platform
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 38/152
Ceramic Drills -External Irrigation
1 MT-CRD21
1:1
2 MT-CRD20
1:1
3 MT-CRD28
1:1
MT-CRD21Ceramic marking drill
1
Dimensions: length - 28.5mmDiameter - 2.10mm
Material: Ceramics
MT-CRD20Ceramic pilot drill
2
Dimensions: length - 33.5mmDiameter - 2mm
Material: Ceramics
MT-CRD28Ceramic twist drill
3
Dimensions: length - 35mmDiameter - 2.80mm
Material: Ceramics
36.
MT-CRD28Ceramic Drills External Irrigation
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 40/152
Surgical Tools - UNO
1 MT-HKS15
1:1
2 MT-HKL21
1:1
3 MT-HKO21
1:1
4 MT-HRL27
1:1
5 MT-HRS27
1:1
6 MT-UML21
1:1
7 MT-UMS21
1:1
MT-HKS15UNO One Pieceimplant short key
1
Dimensions: length - 12mmMaterial: Stainless steel
MT-HKL21UNO One Pieceimplant long key
2
Dimensions: length - 17mmMaterial: Stainless steel
MT-HKO21UNO One Pieceimplant insertion tool
3
Dimensions: length - 18.8mmMaterial: Stainless steel
MT-HRL27Long ratchet adapter forNarrow implant
4
Dimensions: length - 22mmMaterial: Stainless steel
MT-HRS27Short ratchet adapter forNarrow implant
5
Dimensions: length - 15mmMaterial: Stainless steel
MT-UML21UNO One Piece implantmotor adapter, long
6
Dimensions: length - 30mmMaterial: Stainless steel
MT-UMS21UNO One Piece implantmotor adapter, short
7
Dimensions: length - 22mmMaterial: Stainless steel
38.
MT-HKO21UNO One Piece implant
insertion tool
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 41/152
Surgical Tools
1 MT-PP001
1:1
2MT-HW001
1.5:1
3 MT-SMK13
1:1
4 MT-LMK13
1:1
5 MT-DE001
1:1
6 MT-MRH10
1:1
7 MT-MRH20
1:1
8 MT-NRH20
1:1
9 MT-HHK24
1:1
10 MT-HDS30
1:1
11 MT-HDL30
1:1
12 MT-MMH10
1:1
13 MT-MMH20
1:1
MT-PP001Parallel pin
1
Dimensions: length - 24mmØ2mm / Ø3.20mm
Material: Stainless steel
MT-HW001Hand wrench
2
Dimensions: length - 13mmMaterial: Stainless steel
MT-SMK13Short motor keyadapter 0.05"
3
Dimensions: length - 22mmMaterial: Stainless steel
MT-LMK13Long motor keyadapter 0.05"
4
Dimensions: length - 30mmMaterial: Stainless steel
MT-DE001Drill extender
5
Dimensions: length - 28.85mmMaterial: Stainless steel
MT-MRH10Hex. ratchet short adapter forint. hex. connection
6
Dimensions: length - 19mmMaterial: Stainless steel
MT-MRH20Hex. ratchet long adapter forint. hex. connection
7
Dimensions: length - 25mmMaterial: Stainless steel
MT-NRH20Hex. ratchet long adapter forint. hex. connection, NP
8
Dimensions: length - 25mmMaterial: Stainless steel
MT-HHK24Hand key for int.hex. connection
9
Dimensions: length - 24mmMaterial: Stainless steel
MT-HDS30Short hex. drive 0.05"
10
Dimensions: length - 16mmMaterial: Stainless steel
MT-HDL30Long hex. drive 0.05"
11
Dimensions: length - 22mmMaterial: Stainless steel
MT-MMH10Short motor adapter forint. hex. connection
12
Dimensions: length - 22.50mmMaterial: Stainless steel
MT-MMH20Long motor adapter forint. hex. connection
13
Dimensions: length - 30.5mmMaterial: Stainless steel
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 42/152
Surgical Instruments
1 MT-TFA01
1:1
2 MT-TP500
1:2
3 MT-TP420
1:1
4 MT-DI001
1:1
5 MT-HMR05
1:1
6 MT-HMR10
1:1
7 MT-BT020
1:1
8 MT-BT028
1:1
9 MT-BT032
1:1
10 MT-BT038
1:1
11 MT-BT045
1:1
12 MT-BT050
1:1
13 MT-BT055
1:1
MT-TFA01Thread form adapter
1
Dimensions: length - 14mmMaterial: Stainless steel
MT-TP500Tissue punch
2
Dimensions: length - 28mmInner - Ø4.5mm
Material: Stainless steel
MT-TP420Tissue punch dia. 4.20mm
3
Dimensions: length - 29.50mmInner - Ø4.3mm
Material: Stainless steel
MT-DI001Implant Direction Indicator
4
Dimensions: length - 17mmMaterial: Stainless steel
MT-HMR05Short direct hand andratchet hex. key
5
Dimensions: length - 20.5mmMaterial: Stainless steel
MT-HMR10Long direct hand andratchet hex. key
6
Dimensions: length - 25mmMaterial: Stainless steel
MT-BT020Body try in 2mm
7
Dimensions: length - 28.50mmDiameter - 2mm
Material: Stainless steel
MT-BT028Body try in 2.80mm
8
Dimensions: length - 28.50mmDiameter - 2.80mm
Material: Stainless steel
MT-BT032Body try in 3.20mm
9
Dimensions: length - 28.50mmDiameter - 3.20mm
Material: Stainless steel
MT-BT038Body try in 3.80mm
10
Dimensions: length - 28.50mmDiameter - 3.80mm
Material: Stainless steel
MT-BT045Body try in 4.50mm
11
Dimensions: length - 28.50mmDiameter - 4.50mm
Material: Stainless steel
MT-BT050Body try in 5mm
12
Dimensions: length - 28.50mmDiameter - 5mm
Material: Stainless steel
MT-BT055Body try in 5.50mm
13
Dimensions: length - 28.50mmDiameter - 5.50mm
Material: Stainless steel
40.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 43/152
Surgical Instruments
1 MT-MSD20
1:4
2 MT-RI030
1:2
3 MT-RI040
1:2
4 MT-MAL10
1:5
5 MT-BTI10
1:3
MT-MSD20Surgical adapter driver
1
Dimensions: length - 120mmMaterial:
MT-RI030Ratchet wrench
2
Dimensions: length - 75mmMaterial: Stainless steel
MT-RI040Torque wrench
3
Dimensions: length - 80mmMaterial: Stainless steel
MT-MAL10Mallet with solid-plastic insert
4
Material: Stainless steel
MT-BTI10Implant site depth probe6/8/10/11.5/13/16mm
5
Dimensions: length - 100mmØ1.80mm / Ø2.70mm
Material: Stainless steel
Stainless steel+Aluminum
MT-RI030Ratchet wrench
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 45/152
Ongoing research and development efforts by MIS engineers
and scientists have produced state-of-the-art kits that simplify
common procedures and provide creative solutions for
dealing with complex cases.
Kits.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 46/152
MIS presents the Advanced Surgical Kit. The kit includestools for Biocom and Seven mountless implants.
Advanced Surgical Instrument Kit
44.
Advanced Surgical Kit withexternal irrigation drills
MK-EI35
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 47/152
Pcs: Pcs:Pcs: Pcs:
Kit Contents
MK-0035
MT-BT020Body try in 2mm
1
MT-BT028Body try in 2.80mm
1
MT-BT032Body try in 3.20mm
1
MT-BT038Body try in 3.80mm
1
MT-BT045Body try in 4.50mm
1
MT-BT050Body try in 5mm
1
MT-BT055Body try in 5.50mm
1
MT-DE001Drill extender
1
MT-DI001Implant direction indicator
2
MT-GDN33Countersink for
standard platform
1
MT-GDN50Countersink for wide platform1
MT-HHK24Hand key for int.
hex. connection
1
MT-HHR07Short screwdriver for 0.05" hex.
1
MT-HHR13Long hand screwdriver for
0.05" hex.
1
MT-HMR10Long direct hand and
ratchet hex. Key
1
MT-HW001Hand wrench
1
MT-LMK13Long motor key adapter 0.05"
1
MT-MMH10Short motor adapter for int.
hex. connection
1
MT-MMH20Long motor adapter for int.
hex. connection
1
MT-MRH10Hex. ratchet short adapter forint. hex. connection
1
MT-MRH20Hex. ratchet long adapter for
int. hex. connection
1
MT-PP001Parallel pin
3
MT-RI030Ratchet wrench
1
MT-SMK13Short motor key adapter 0.05"
1
MK-EI35
MT-TDN19Marking drill 1.90mm
1
MT-TDN20Pilot drill 2mm
1
MT-TDN28Twist drill 2.80mm
1
MT-TDN32Twist drill 3.20mm
1
MT-TDN38Twist drill 3.80mm
1
MT-TDN45Twist drill 4.50mm
1
MT-TDN50Twist drill 5mm
1
MT-TDN55Twist drill 5.50mm
1
MK-IR35
MT-TD110Marking drill 1.90mm
1
MT-TD200Pilot drill 2mm
1
MT-TD280Twist drill 2.80mm
1
MT-TD320Twist drill 3.20mm
1
MT-TD380Twist drill 3.80mm
1
MT-TD450Twist drill 4.50mm
1
MT-TD500Twist drill 5mm
1
MT-TD550Twist drill 5.50mm
1
Advanced Surgical Kit suppliedwithout drills
Advanced Surgical Kit withexternal irrigation drills
Advanced Surgical Kit withinternal irrigation drills
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 48/152
The MIS Prosthetic Tools Kit consists of all the tools that are needed for a successfulrestoration. The kit consists of a torque wrench, a locator placing tool, and abutmentholders and offers improved handling when preparing the abutment. MIS hex.drivers, abutment indicators are also a part of the kit.
Prosthetic Tools Kit
MK-0039
MK-0039Prosthetic Tools Kit
46.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 49/152
MT-MSD20Surgical adapter driver
Pcs: Pcs:Pcs: Pcs:
Kit Contents
MM-LCT10Locator core tool
1
MM-LSD15Locator torque wrench
driver short
1
MM-LSD21Locator torque wrench
driver long
1
MT-BK235Ball attachment anchor key
1
MT-DI001Implant Direction Indicator
4
MT-HDL30Long hex. drive 0.05"
1
MT-HDS30Short hex. drive 0.05"
1
MT-HHR07Short screwdriver for 0.05" hex.
1
MT-HHR13Long hand screwdriver
for 0.05" hex.
1
MT-IE172Int. connection
abutment extractor
1
MT-IT100Closed tray impression
coping key
1
MT-LMK13Long motor key adapter 0.05"
1
MT-MUK02Multi-Unit key
1
MT-RI040Torque wrench
1
MT-SMK13Short motor key adapter 0.05"
1
MT-US002Int. hex. implant analog for
universal hand driver
1
MT-UW002Wide int. hex. Implant analogfor universal hand driver
1
1
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 50/152
The Drill Stopper Kits ensure the dental surgeonsimple and accurate depth control.
Drill Stopper Kits
Stoppers
IN Insert
OUT InsertDrill
Five sleeves for standardimplants in 8, 10, 11.5, 13 and16mm with different-coloredrings for each diameter.
Teon® tube simplies theinsertion of the drill into thestopper sleeve.
Teon® tube simplies theremoval of the drill from thestopper sleeve.
Color-coded drill matchessleeve color.
Simple.
Quick, easy assembly.
Fast.
Color coding for immediateidentication of sleeve diameter.
Clear.
Clearly arranged matching depthsleeves from 8mm to 16mm.
Safe.
Safe drilling to planned depth.
The kit is available in 5 diameters. The MIS Stopper Kit ts MIS drills, enabling the doctor to drill to the exact desired
depth during implantation. It is simple to use and available in different diameters
(2mm, 2.8mm, 3.2mm, 3.8mm, 4.5mm).
Kit Contents:
Ø2mm - Standard
Ø2.80mm - Standard
Ø3.80mm - Standard
Ø3.20mm - Standard
Ø4.50mm - Standard
MK-ST020
MK-ST028
MK-ST032
MK-ST045
MK-ST038
48.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 51/152
The Bone Harvest Kit ensures easy and simplebone harvesting during surgery.
Yeung Bone Harvest Kit
Drill
Color-coded drill matches
the sleeve color.
Revolutionary dual action-bone harvesting while drilling;The harvested bone can now be used elsewhere, asneeded. A simple procedure enables the use of thepatient’s own bone, as opposed to substitute materials.Drills can also be used as nal drills.
Simple.
The bone will accumulate insidethe drill’s slot during drilling.
Kit Contents
The Bone Harvest Kit includes these drills:
Easy.
The Bone Harvest Kit can be used asa nal drill while harvesting bone.
Safe.
The Bone Harvest Kit can be usedwith MIS drill stoppers, ensuring asafe drilling procedure.
Ø2.80mm
Ø3.20mm
Ø3.80mm
Ø4.50mm
Color coding: Drill diameter 2.80mm Drill diameter 3.80mm
Drill diameter 3.20mm Drill diameter 4.50mm
Recommendation:
The drill can be used with external irrigation.Start drilling with a slight push and a littlecontinuous pressure. When the drill is takenout, continue rotation to keep the bone insidethe drill’s slot.
* The drills should be used for a maximumof 30 drillings.
Recommended Speed:
Recommended speed is between20-50 RPM without irrigation.
Material:
The bone harvest drills are made ofstainless steel and can be easily cleaned.
MT-BC280
MT-BC320
MT-BC380
MT-BC450
MK-BH26
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 52/152
The MIS Crest Widener is used to widen a narrow alveolar crest which has sufcientheight for implantation. By separating the cortical plates new bone is created inbetween the plates, and the attached gingiva is extracted simultaneously. Withthis technique, bone augmentation is avoided, the implant is placed in the correctlateral position and sufcient attached gingiva is obtained. In addition, the widenercan be used to allow easy distal or mesial orthodontic movements of the molars.
Crest Widener
MK-CW28
50.
MK-CW28Crest Widener Kit
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 53/152
Advantages:
Mucosal Distraction leads to sufcientattached gingiva and soft tissue cover(DistractionHistiogenesis).
Implant placement is possible after ex tremelyshort post-operative period (5-8 weeks).
Simple, short, minimaltraumatic procedure.
Encourages ideal lateral implantplacement when needed.
No pain or morbidity at donor site.
Minimally compromised aesthetics.
Less technique-sensitive.
The transported bone is not strippedfrom periostium, therefore no postoperative bone resorption.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 54/152
The Abrahami Drill Guide Kit has been designed to enable the dental surgeonto accurately locate and drill the holes of two or more consecutive implants withoptimal spacing, angulation and parallelism.
Abrahami Drill Guide Kit
MK-0011
52.
MK-0011Abrahami Drill Guide Kit
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 55/152
Optimal parallelism
Guides and ensures completevertical parallelism between theimplants.
The stabilization system
The extension arms
Optimal spacing
Optimal angulation
Located within the top of the block and consistsof a screw (top) and a spring-loaded ball (inside).It allows the extension pin to be graduallystabilized at the desired length and inclination.
Permit variable bucco-lingual inclinations andmesio-dis tal locations relative to the central block.In the extension arm’s free end are 2 holes for2mm and 2.8mm drills in perpendicular planes.
Optimal spacing enables the surgeon to locate theholes for the planned implants with the requiredinter-implant distance.
Screw
Spring
Ball
Location pin
Optimal angulation enables the surgeon todrill in the most advantageous bucco-lingualangle possible, within anatomic limits.
Before cleaning, the location pins have to be separated
as follows: screws, springs, balls and pins. Cleaning anddrying the parts is essenti al for the good functioningof the system. This will avoid erosion of the parts.
Location Pins Ø2mm
Location Pins Ø2.80mm
Extension Arms
Paralleling Pin 20mm
Short 10mm
Short 10mm
6, 7, 8mm
9, 10, 11mm
Short 16mm
Short 16mm
12, 13, 14mm
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 56/152
The Bone Compression Kit developed by MIS improves the treatment of sinus liftingand anchoring in relatively soft bone types 3 and 4. A simple bone compressionprocedure enables better implantation, better primary stability, and the preventionof bone loss.
Bone Compression Kit
MK-0020
54.
MK-0020Bone Compression Kit
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 57/152
Kit Contents
1 MO-CO160
1:1
2 MO-CO200
1:1
3 MO-CO240
1:1
4 MO-CO280
1:1
5 MO-SO300
1:1
6 MO-SO350
1:1
7 MO-SO400
1:1
8 MT-MMA10
1:1
9 MT-MMA20
1:1
10 MT-MRL10
1:1
11 MT-MRS10
1:1
12 MT-SMD10
1:1
13 MT-RI030
1:2
MO-CO160Convex compress screw
1
Dimensions: Ø1.60-Ø2.90mmMaterial: Stainless steel
MO-CO200Convex compress screw
2
Dimensions: Ø2-Ø3.30mmMaterial: Stainless steel
MO-CO240Convex compress screw
3
Dimensions: Ø2.40-Ø3.70mmMaterial: Stainless steel
MO-CO280Convex compress screw
4
Dimensions: Ø2.80-Ø4.30mmMaterial: Stainless steel
MO-SO300Concave sinus screw 3mm
5
Dimensions: Diameter - 3mmMaterial: Stainless steel
MO-SO350Concave sinus screw3.50mm
6
Dimensions: Diameter - 3.50mmMaterial: Stainless steel
MO-SO400Concave sinus screw 4mm
7
Dimensions: Diameter - 4mmMaterial: Stainless steel
MT-MMA10Short motor mount adapter
8
Dimensions: length - 18.3mmMaterial: Stainless steel
MT-MMA20Long motor mount adapter
9
Dimensions: length - 25.3mmMaterial: Stainless steel
MT-MRL10Long ratchet mount adapter
10
Dimensions: length - 22mmMaterial: Stainless steel
MT-MRS10Short ratchet mount adapter
11
Dimensions: length - 15mmMaterial: Stainless steel
MT-SMD10Spade marking drill
12
Dimensions: length - 27.5mmMaterial: Stainless steel
MT-RI030Ratchet wrench
13
Dimensions: length - 75mmMaterial: Stainless steel
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 58/152
The MIS UNO implant surgical Kit is a small kitwhich includes drills, tools and a ratchet wrench.
MK-0036Uno Implant Surgical Kit
UNO Implant Surgical Kit
MK-0036
56.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 59/152
Kit Contents
1 MT-NB225
1:1
2 MT-BT020
1:1
3 MT-HDL30
1:1
4 MT-HKL21
1:1
5 MT-HKO21
1:1
6 MT-HRL27
1:1
7 MT-MMH20
1:1
8 MT-MRH20
1:1
9 MT-PP001
1:1
10 MT-RI030
1:2
11 MT-SMD10
1:1
MT-NB225Narrow ball attachment key
1
Dimensions: length - 22mmMaterial: Stainless steel
MT-BT020Body try in 2mm
2
Dimensions: length - 28.50mmDiameter - 2mm
Material: Stainless steel
MT-HDL30Long hex. drive 0.05"
3
Dimensions: length - 22mmMaterial: Stainless steel
MT-HKL21UNO One Piece implantlong key
4
Dimensions: length - 17mmMaterial: Stainless steel
MT-HKO21UNO One Piece implantinsertion tool
5
Dimensions: length - 20mmMaterial: Stainless steel
MT-HRL27Long ratchet adapter fornarrow implant
6
Dimensions: length - 22mmMaterial: Stainless steel
MT-MMH20Long motor adapter forint. hex. connection
7
Dimensions: length - 25mmMaterial: Stainless steel
MT-MRH20Hex. ratchet long adapter forint. hex. connection
8
Dimensions: length - 22mmMaterial: Stainless steel
MT-PP001Parallel pin
9
Dimensions: length - 24mmØ2-Ø3.20mm
Material: Stainless steel
MT-RI030Ratchet wrench
10
Dimensions: length - 75mmMaterial: Stainless steel
MT-SMD10Spade marking drill
11
Dimensions: length - 27.5mmMaterial: Stainless steel
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 60/152
MK-0036 - Kit Contents(Continuation)
1 MT-TDN20
1:1
2 MT-TDN24
1:1
3 MT-TDN30
1:1
4 MT-UML21
1:1
MT-TDN20Pilot drill 2mmexternal irrigation
1
Dimensions: length - 37.3mmDiameter - 2mm
Material: Stainless steel
MT-TDN24Twist drill 2.40mmexternal irrigation
2
Dimensions: length - 37.5mmDiameter - 2.40mm
Material: Stainless steel
MT-TDN30Twist drill 3mmexternal irrigation
3
Dimensions: length - 37.6mmDiameter - 3mm
Material: Stainless steel
MT-UML21UNO One Piece implantmotor adapter, long
4
Dimensions: length - 30mmMaterial: Stainless steel
58.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 61/152
Pcs
Kit Content:
MK-0016Mountless Basic Surgical Kit
MK-0016
The Mountless MIS Basic Kit is a small kit whichcontains the minimum surgical instrumentsnecessary for implant placement.
MT-BT020Body try in 2mm
1
MT-BT028Body try in 2.80mm
1
MT-BT032Body try in 3.20mm
1
MT-BT038Body try in 3.80mm
1
MT-DE001Drill extender
1
MT-GDN33Countersink for standardplatform
1
MT-HDL30Long hex. drive 0.05"1
MT-HMR10Long direct hand andratchet hex. key
1
MT-HW001Hand wrench
1
MT-MMH20Long motor adapter for int.hex.connection
1
MT-MRH10Hex. ratchet short adapterfor int. hex. connection
1
MT-MRH20Hex. ratchet long adapter
for int. hex. connection
1
MT-PP001Parallel pin
3
MT-RI030Ratchet wrench
1
MT-SMD10Spade marking drill
1
MT-TD200Pilot drill 2mm
1
MT-TD280Twist drill 2.80mm
1
MT-TD320Twist drill 3.20mm
1
MT-TD380Twist drill 3.80mm
1
Mountless Basic Surgical Kit
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 62/152
The MIS Organizer Kit is a small kit which includesempty places for drills, tools, ratchets, etc.
MK-0012The Organizer Kit
The Organizer Kit
MK-0012
60.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 63/152
Kit Content:
Pcs
MK-0024
The MIS Convex Osteotomes Set is used for expandingthe bone while preparing the implant site. The Set canalso be used in sinus elevation procedures.
MO-CBS20Convex bajonetosteotome with stopperdia. 2mm
1
MO-CBS30Convex bajonetosteotome with stopperdia. 3mm
1
MO-CBS32Convex bajonetosteotome with stopperdia. 3.25mm
1
MO-CBS40Convex bajonetosteotome with stopperdia. 4mm
1
1
MO-CS200Convex osteotome withstopper dia. 2mm
1
MO-CS300Convex osteotome withstopper dia. 3mm
1
MO-CS325Convex osteotome withstopper dia. 3.25mm
1
MO-CS400Convex osteotome withstopper dia. 4mm
1
Convex Osteotomes Set
MK-0024Convex Osteotomes Set
6mm
11mm
15mm
Convex
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 64/152
Kit Content:
Pcs
MK-0002
The MIS stainless steel Osteotomes Set tools are lasermarked for depth, and are used for splitting and expandingthe bone while preparing the implant site. The implant siteosteotomes tools in this set have a convex tip.
MO-IP180Implant site osteotomedia. 1.80mm
1
MO-IP280Implant site osteotomedia. 2.80mm
1
MO-IP320Implant site osteotomedia. 3.20mm
1
MO-IP380Implant site osteotomedia. 3.80mm
1
MO-IP435Implant site osteotomedia. 4.35mm
1
1
MO-SP300Expanding osteotomedia. 3mm
1
MO-SP450Expanding osteotomedia. 4.50mm
1
MO-SP550Expanding osteotomedia. 5.50mm
1
Osteotomes Set
62.
MK-0002Osteotomes Set
8mm
10mm
11.5mm
13mm
16mm
Convex
8mm
10mm
11.5mm
13mm
16mm
Sharp at
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 65/152
Kit Content:
Pcs
MK-0023
The MIS Alveolar Ridge Expanding Osteotomes Set is used forsinus elevation. The Set includes four straight sinus concaveosteotomes with stoppers, and four sinus concave bajonet toolswith stoppers. All tools in this Kit are made of stainless steel.
MO-SLS20Sinus concave osteotomewith stopper dia. 2mm
1
MO-SLS30Sinus concave osteotomewith stopper dia. 3mm
1
MO-SLS32Sinus concave osteotomewith stopper dia. 3.25mm
1
MO-SLS40Sinus concave osteotomewith stopper dia. 4mm
1
1
MO-SLA20Sinus concave bajonetosteotome with stopperdia. 2mm
1
MO-SLA30Sinus concave bajonetosteotome with stopperdia. 3mm
1
MO-SLA32Sinus concave bajonetosteotome with stopperdia. 3.25mm
1
MO-SLA40Sinus concave bajonetosteotome with stopperdia. 4mm
1
Sinus Lift Osteotomes Set
6mm
11mm
15mm
Concave
MK-0023Sinus Lift Osteotomes Set
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 66/152
Implant system.
64.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 67/152
MIS offers a wide variety of superstructures. This provides
many options, with an emphasis on simplicity and
convenience in restoration work.
Prosthetic.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 69/152
Analog and Impression Coping -Narrow Platform
1 MN-RSM10
1.5:1
2 MN-IT100
1.5:1
3 MN-GP100
1.5:1
4 MN-IT300
1.5:1
5 MN-I0330
1.5:1
6 MN-G0160
1.5:1
MN-RSM10Implant analoginternal hex. NP
1
Dimensions: length - 12mmMaterial: Stainless steel
MN-IT100Direct impression copingfor closed tray
2
Dimensions: height - 9mmMaterial: Stainless steel
MN-GP100Direct impression copingguide pin internal hex. NP
3
Dimensions: length - 16.5mmMaterial: Titanium
MN-IT300Direct impression copingSet for closed tray NP
4
Dimensions: height - 7.8mmMaterial: Titanium
MN-I0330Direct impression copingfor open tray internal hex. NP
5
Dimensions: height - 11mmMaterial: Stainless steel
MN-G0160Direct impression copingguide pin internal hex.
6
Dimensions: length - 21mmMaterial: Titanium
NARROW
MN-IT300Direct impression coping Set
for closed tray NP
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 70/152
5
1 MN-CPK61
2 MN-RSM60
3 MN-CHC60
4 MN-IC600
5 MN-IC040
6 MN-ICH40
NPK - NarrowProsthetic Kit
MK-NPK61
MK-NPK61Narrow prosthetic kit, NP
MN-CPK61Anatomic 1mm transgingival abutment,crown height 6mm, NP
1
MN-RSM60Abutment analog crown height 6mm, NP
2
MN-CHC60Plastic healing cap crown h. 6mm, NP
3
MN-IC600Direct Impression coping plastic cap, NP
4
MN-IC040Burn out plastic cap, NP
5
MN-ICH40Burn out anti rotation plastic cap, NP
6
68.
NARROW
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 71/152
Kit Options:
MK-NPK411mm Narrow prosthetic kit,
crown height 4mm, NP
1
MK-NPK422mm Narrow prosthetic kit,crown height 4mm, NP
6
MK-NPK433mm Narrow prosthetic kit,crown height 4mm, NP
6
MK-NPK444mm Narrow prosthetic kitcrown height 4mm, NP
6
MK-NPK611mm Narrow prosthetic kitcrown height 6mm, NP
6
MK-NPK622mm Narrow prosthetic kit,crown height 6mm, NP
6
MK-NPK633mm Narrow prosthetic kit,crown height 6mm, NP
6
MK-NPK644mm Narrow prosthetic kit,crown height 6mm, NP
6
NPK - Narrow Prosthetic Kit
NARROW
MK-NPK61
Narrow prosthetic kit
C=4mmH=1,2,3,4mm
C=Crown Height
H=Gingival Height
C=6mmH=1,2,3,4mm
}
}
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 72/152
Narrow Platform - Direct System -Screw retained reconstruction
1 MN-CP013
1.5:1
2 MN-CPH13
1.5:1
3 MN-S0160
1.5:1
MN-CP013Direct plastic cylinder int.hex. without hex. NP
1
Dimensions: height - 11mmMaterial: Burn out plastic
MN-CPH13Direct plastic cylinder int.hex. with hex. NP
2
Dimensions: height - 11mmMaterial: Burn out plastic
MN-S0160Direct prostheticscrew Int. hex. NP
3
Dimensions: length - 7.6mm30 Ncm
Material: Titanium
NARROW
* The” functional height “ of all abutments ismeasured from the platform connection anddoes not include the internal hex. connection.
70.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 73/152
Narrow Platform - Direct System -Cemented reconstruction
1 MN-MAC10
1.5:1
2 MN-AN020
1.5:1
3 MN-S0160
1.3:1
4 MN-ICH40
1.5:1
5 MN-IC040
1.5:1
MN-MAC10Narrow platformcementing post, NP
1
Dimensions: height - 11mmMaterial: Titanium
MN-AN02020 degree angulatedabutment Int. hex. NP
2
Dimensions: height - 8mmMaterial: Titanium
MN-S0160Direct prostheticscrew Int. hex. NP
3
Dimensions: length - 7.6mm30 Ncm
Material: Titanium
MN-ICH40Burn out anti rotationplastic cap, NP
4
Dimensions: length - 8mmMaterial: Burn out plastic
MN-IC040Burn out plastic cap, NP
5
Dimensions: length - 8mmMaterial: Burn out plastic
C=4mm,H=1,2,3,4mmMN-CPK41*MN-CPK42*MN-CPK43*MN-CPK44*
C=6mm,H=1,2,3,4mm
MN-CPK61*MN-CPK62*MN-CPK63*MN-CPK64*
6 transgingival abutment, NPMN-CPK
CH
}
NARROW
* All CPK abutments are provided with burn out anti rotation plastic cap MN-ICH40
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 74/152
Narrow PlatformBall Attachment System
1 MB-N2330
1.5:1
2 MB-N3330
1.5:1
3 MB-N4330
1.5:1
4 MT-NB225
1:1.5
5 MB-RS375
1.1
6 MB-SF200
7 MB-DB235
1:1
8 MB-GPS10
9 MB-DMH10
1:1
10 MB-PPC10
11 MB-TTP10
12 MB-PR010
13 MT-TSD10
1:2
14 MB-TBS10
15 MB-TBS20
MB-N2330Ball attachment anchorinternal hex. 2mm. NP
1
Dimensions: height - 2mmMaterial: Titanium
MB-N3330Ball attachment anchorinternal hex. 3mm. NP
2
Dimensions: height - 3mmMaterial: Titanium
MB-N4330Ball attachment anchorinternal hex. 4mm. NP
3
Dimensions: height - 4mmMaterial: Titanium
MT-NB225Ball attachment anchor key
4
Dimensions: length - 22mmMaterial: Stainless steel
MB-RS375Ball attachment analoginternal hex.
5
Dimensions: length - 15.1mmMaterial: Stainless steel
MB-SF200Plastic ball cap
6
Dimensions: length - 3.5mmMaterial: Plastic
MB-DB235Plastic disc for ballattachment
7
Dimensions: Diameter - 15mmMaterial: Plastic
MB-GPS10Gold ball cap
8
Dimensions: length - 2.4mmMaterial: Gold-e
MB-DMH10Double metal housing
9
MB-PPC10Standard plastic cap formetal housing
10
Dimensions: length - 2.6mmMaterial: Plastic
MB-TTP10Titanium ball cap
11
Dimensions: length - 3.1mmMaterial: Titanium
MB-PR010Plastic mounting sleeve
12
Dimensions: length - 2mmMaterial: Plastic
MT-TSD10Screw driver fortitanium ball cap
13
Dimensions: length - 60mmMaterial: Stainless steel
MB-TBS10Titanium ball capspring standard
14
Dimensions: Diameter - 2.5mmMaterial: Steel
MB-TBS20Titanium ball cap spring soft
15
Dimensions: Diameter - 2.6mmMaterial: Steel
NARROW1.5:1
1.5:1
1.5:1
1.5:1
1.5:1
2:1
2:1
2:1
16 MB-PPR10
MB-PPR10Soft plastic cap formetal housing
16
Dimensions: length - 2.6mmMaterial: Plastic
72.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 75/152
Analogs and Impression Coping -Standard Platform
1 MD-IT100
1.5:1
2 MD-GP100
1.5:1
3 MD-I0375
1.5:1
4 MD-G0213
1.5:1
5 MD-IT300
1.5:1
6 MD-PF375
1.5:1
7 MD-RSM10
1.5:1
MD-IT100Direct impression copingfor closed tray internal hex.
1
Dimensions: height - 9mmMaterial: Stainless steel
MD-GP100Direct impression copingguide pin internal hex.
2
Dimensions: length - 16.5mmMaterial: Titanium
MD-I0375Direct impression copingfor open tray internal hex.
3
Dimensions: height - 11mmMaterial: Stainless steel
MD-G0213Direct impression copingguide pin internal hex.
4
Dimensions: length - 21.3mmMaterial: Titanium
MD-IT300Direct impression copingfor closed tray internal hex.
5
Dimensions: height - 8mmMaterial: Titanium
MD-PF375Press t impressioncoping for closed tray
6
Dimensions: height - 11mmMaterial: Titanium
MD-RSM10Implant analog internal hex.
7
Dimensions: length - 12mmMaterial: Stainless steel
STANDARD
MD-IT100Direct impression coping
for closed tray internal hex.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 76/152
MK-CPK61Complete Prosthetic Kit, SP
5
1 MD-CPK61
2 MD-RSM60
3 MM-CHC60
4 MD-IC800
5 MD-IC040
6 MD-ICH40
CPK - CompleteProsthetic Kit
MK-CPK61
MD-CPK61Anatomic 1mm transgingival abutment,crown height 6mm, SP
1
MD-RSM60Standard abutment analogcrown height 6mm, SP
2
MM-CHC60Plastic healing cap crown h. 6mm, SP
3
MD-IC800Direct Impression coping, h. 8mm, SP
4
MD-IC040Burn out plastic cap, SP
5
MD-ICH40Burn out anti rotation plastic cap, SP
6
74.
STANDARD
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 77/152
MK-CPK411mm Complete prosthetic kit,
crown height 4mm, SP
1
MK-CPK422mm Complete prosthetic kit,crown height 4mm, SP
6
MK-CPK433mm Complete prosthetic kit,crown height 4mm, SP
6
MK-CPK444mm Complete prosthetic kit,crown height 4mm, SP
6
MK-CPK611mm Complete prosthetic kit,crown height 6mm, SP
6
MK-CPK622mm Complete prosthetic kit,
crown height 6mm, SP
6
MK-CPK633mm Complete prosthetic kit,crown height 6mm, SP
6
MK-CPK644mm Complete prosthetic kit,crown height 6mm, SP
6
MK-CPK811mm Complete prosthetic kit,crown height 8mm, SP
6
MK-CPK822mm Complete prosthetic kit,crown height 8mm, SP
6
MK-CPK833mm Complete prosthetic kit,
crown height 8mm, SP
6
MK-CPK844mm Complete prosthetic kit,crown height 8mm, SP
6
CPK - Complete Prosthetic Kit
STANDARD
MK-CPK61Complete Prosthetic Kit, SP
C=4mmH=1,2,3,4mm
C=Crown Height
H=Gingival Height
C=6mmH=1,2,3,4mm
C=8mmH=1,2,3,4mm
}
}
}
Kit Options
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 78/152
Packaging.RA Technical Kit
MK-RADT1
4
1
23
5
The drilling xture is a mechanical device for creating
the housing of the abutment screw once the PCE and
the ICE are denitively connected.
The Drilling Fixture
RA Technical Kit
The xture is made up of four components:
1. The ”body,” (4) with a Ø2.3 mm hole on top; on the bottom, an apertureallowing the positioning of the footer; and on the lateral side a screwto be activated by an “elen”.
2. The footer is for maintaining the model of the RA; it has a Ø1.8 mmdiameter hole at its base (1,2).
3. The footer screw (5).
4. A stopper used with the acryl ICE (3).
The Reverse Abutment technical kit facilitatesthe accurate drilling of a screw canal throughthe completed RA prior to its casting.
76.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 79/152
1
2
3
4
5
Stainless Steel
length 55mm
length 40mm
MaterialDimensions
MK-RADT1
Additional components
RA Technician kit
Tools
Drill Ø 1.80mmMT-RAD18
Drill Ø 2.30mmMT-RAD23
Stainless Steellength 40mmMT-RAPP2 Reverse Abutment Parallel Pin
Stainless Steellength 57.7mmAllen key 2mmMT-AL002
Locking xture nut
Drilling guide
Stopper
Body
Footer screw
MT-RAD10
Stainless Steel
R.A
I.C.E
I.E
P.C.E
Reverse abutment
Implant connection element
Intermediary element
Prosthesis connection element
Acronyms:
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 80/152
MK-RAGS1GBK- Gold Base KitStandard platform
MK-RAGW1GBK- Gold Base Kit Wide forStandard platform
The Gold Base Kit is conveniently designed to house all the necessarycomponents needed for the fabrication of an RA with a gold I.C.E andfor its simple impression transfer.
Reverse Abutment - Gold Base Kit
MK-RAGS1
78.
STANDARD
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 81/152
Kits Contents
1 MD-RAG01
2 MD-S0220
1.5:1
3 MM-RAPE1
1.5:1
4 MD-RAI01
1.5:1
5 MD-RSM48
1.5:1
6 MM-MTP53
7 MM-CHC55
8 MM-APC49
9 MM-CPC49
1 MD-RAG01
2 MD-S0220
1.5:1
3 MM-RAPE1
1.5:1
4 MD-RAI01
1.5:1
5 MW-RSM48
1.5:1
6 MM-MTP53
7 MW-CHC55
8 MW-APC49
9 MW-CPC49
MD-RAG01Gold implantconnection element
1
Dimensions: length - 4mmMaterial: Gold
MD-S0220Direct prosthetic screwinternal hex.
2
Dimensions: length - 7.6mm30 Ncm
Material: Titanium
MM-RAPE1Prosthesis connectionelement standard
3
Dimensions: length - 5.5mmMaterial: Burn out Plastic
MD-RAI01Connector pin
4
Dimensions: length - 6.95mmMaterial: Plastic
MD-RSM48Standard abutment analog
5
Dimensions: length - 17.7mmMaterial: Stainless steel
MM-MTP53Impression copingplastic cap
6
Dimensions: length - 9.6mmMaterial: Plastic
MM-CHC55Plastic healing cap
7
Dimensions: length - 5.5mmMaterial: Plastic
MM-APC49Burn out anti rotationplastic cap
8
Dimensions: length - 5.6mmMaterial: Burn out Plastic
MM-CPC49Burn out plastic cap
9
Dimensions: length - 5.6mmMaterial: Burn out Plastic
MD-RAG01Gold implantconnection element
1
Dimensions: length - 4mmMaterial: Gold
MD-S0220Direct prosthetic screwinternal hex.
2
Dimensions: length - 7.6mm30 Ncm
Material: Titanium
MM-RAPE1Prosthesis connectionelement standard
3
Dimensions: length - 5.5mmMaterial: Burn out Plastic
MD-RAI01Connector pin
4
Dimensions: length - 6.95mmMaterial: Plastic
MW-RSM48Wide abutment analog
5
Dimensions: length - 18mmMaterial: Stainless steel
MM-MTP53Impression copingplastic cap
6
Dimensions: length - 9.6mmMaterial: Plastic
MW-CHC55Wide plastic healing cap
7
Dimensions: length - 5.5mmMaterial: Plastic
MW-APC49Burn out anti rotationwide plastic cap
8
Dimensions: length - 5.6mmMaterial: Burn out Plastic
MW-CPC49Burn out wide plastic cap
9
Dimensions: length - 5.6mmMaterial: Burn out Plastic
MK-RAGW1MK-RAGS1
STANDARD1.5:1
1.5:1
1.5:1
1.5:1
1.5:1
1.5:1
1.5:1
1.5:1
1.5:1
1.5:1
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 82/152
MK-RAPS1PBK -Plastic Base KitStandard platform
MK-RAPW1PBK -Plastic Base KitWide for Standard platform
The Plastic Base Kit is conveniently designed to house all the necessarycomponents needed for the fabrication of an RA with a plastic I.C.E andfor its simple impression transfer.
PBK - Plastic Base Kit
MK-RAPS1
80.
STANDARD
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 83/152
Kits Contents
1 MD-CPH13
1.5:1
2 MD-RAI01
1.5:1
3 MD-RSM48
1.5:1
4 MD-S0220
1.5:1
5 MM-MTP53
6 MM-CHC55
7 MM-APC49
8 MM-CPC49
1 MD-CPH13
1.5:1
2 MD-RAI01
1.5:1
3 MW-RSM48
1.5:1
4 MD-S0220
1.5:1
5 MM-MTP53
6 MW-CHC55
7 MW-APC49
8 MW-CPC49
MD-CPH13Direct hexed plastic cylinderint. with gold screw
1
Dimensions: height - 11mmMaterial: Plastic
MD-RAI01Connector pin
2
Dimensions: length - 6.95mmMaterial: Plastic
MD-RSM48Standard abutment analog
3
Dimensions: length - 17.7mmMaterial: Stainless steel
MD-S0220Direct prosthetic screwinternal hex.
4
Dimensions: length - 7.6mm30 Ncm
Material: Titanium
MM-MTP53Impression copingplastic cap
5
Dimensions: length - 9.6mmMaterial: Plastic
MM-CHC55Plastic healing cap
6
Dimensions: length - 5.5mmMaterial: Plastic
MM-APC49Burn out anti rotationplastic cap
7
Dimensions: length - 5.6mmMaterial: Burn out Plastic
MM-CPC49Burn out plastic cap
8
Dimensions: length - 5.6mmMaterial: Burn out Plastic
MD-CPH13Direct hexed plastic cylinderint. with gold screw
1
Dimensions: height - 11mmMaterial: Plastic
MD-RAI01Connector pin
2
Dimensions: length - 6.95mmMaterial: Plastic
MW-RSM48Wide abutment analog
3
Dimensions: length - 18mmMaterial: Stainless steel
MD-S0220Direct prosthetic screwinternal hex.
4
Dimensions: length - 7.6mm30 Ncm
Material: Titanium
MM-MTP53Impression copingplastic cap
5
Dimensions: length - 9.6mmMaterial: Plastic
MW-CHC55Wide plastic healing cap
6
Dimensions: length - 5.5mmMaterial: Plastic
MW-APC49Burn out anti rotation wideplastic cap
7
Dimensions: length - 5.6mmMaterial: Burn out Plastic
MW-CPC49Burn out wide plastic cap
8
Dimensions: length - 5.6mmMaterial: Burn out Plastic
MK-RAPW1MK-RAPS1
STANDARD
1:1
1.5:1
1.5:1
1.5:1
1:1
1.5:1
1.5:1
1.5:1
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 84/152
Standard Platform Direct System -Screw retained reconstruction
1 MD-TCH13
1.5:1
2 MD-TPH50
1.5:1
3 MD-CP013
1.5:1
4 MD-CP050
1.5:1
5 MD-CPH13
1.5:1
6MD-CPH50
1.5:1
7 MD-GP010
1.5:1
8 MD-GPC10
1.5:1
9 MD-G0220
1.5:1
10 MD-S0200
1.5:1
11 MD-S0220
1.5:1
12 MD-S0222
1.5:1
13 MD-S0224
1.5:1
MD-TCH13Direct temporary cylinderwith hex. internal hex.
1
Dimensions: height - 11mmMaterial: Titanium
MD-TPH50Direct temporary plasticcylinder internal hex.
2
Dimensions: height - 12mmDiameter - 4mm
Material: Plastic
MD-CP013Direct plastic cylinderwithout hex. internal hex.
3
Dimensions: height - 11mmDiameter - 3.20mm
Material: Burn out Plastic
MD-CP050Wide prole direct plasticcylinder without hex.
4
Dimensions: height - 11mmDiameter - 5mm
Material: Burn out Plastic
MD-CPH13Direct plastic cylinderwith hex. internal hex.
5
Dimensions: height - 11mmDiameter - 3.20mm
Material: Burn out Plastic
MD-CPH50Wide prole direct plasticcylinder with hex.
6
Dimensions: height - 11mmDiameter - 4mm
Material: Burn out Plastic
MD-GP010Direct gold plastic cylinderwithout hex. internal hex.
7
Dimensions: height - 15mmDiameter - 4.50mm
Material:
MD-GPC10Direct gold plastic cylinderwith hex. internal hex.
8
Dimensions: height - 15mmDiameter - 4.50mm
Material:
MD-G0220Direct gold prostheticscrew internal hex.
9
Dimensions: length - 7.70mm20 Ncm
Material: Gold-s
MD-S0200Mini prosthetic screwinternal hex.
10
Dimensions: length - 6.90mm30 Ncm
Material: Titanium
MD-S0220Direct prosthetic screwinternal hex.
11
Dimensions: length - 7.60mm30 Ncm
Material: Titanium
MD-S0222Medium prosthetic screwinternal hex.
12
Dimensions: length - 12mm30 Ncm
Material: Titanium
MD-S0224Long prosthetic screwinternal hex.
13
Dimensions: length - 14mm30 Ncm
Material: Titanium
STANDARD
Burn out Plastic+gold -a
Burn out Plastic+gold -a
* The” functional height “ of all abutments ismeasured from the platform connection anddoes not include the internal hex. connection.
82.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 85/152
Standard Platform Direct System -Cemented reconstruction
1 MD-A0010
1.5:1
2 MD-P0030
1.5:1
3 MD-CR010
1.5:1
4 MD-CTP10
1.5:1
5 MD-MAC10
1.5:1
6 MD-MACF1
1.5:1
7 MD-WMAC1
1.5:1
8 MD-IC040
1.5:1
9 MD-ICH40
1.5:1
MD-A0010Esthetic abutmentinternal hex. 1mm
1
Dimensions: height - 9mmMaterial: Titanium
MD-P0030Esthetic abutmentinternal hex. 3mm
2
Dimensions: height - 11mmMaterial: Titanium
MD-CR010Standard platform Zircon1mm internal hex.
3
Dimensions: height - 9mmMaterial: Zircon
MD-CTP10Narrow cementing post
4
Dimensions: height - 8.5mmDiameter - 3.75mm
Material: Titanium
MD-MAC10Standard cementing post
5
Dimensions: height - 11mmDiameter - 4.75mm
Material: Titanium
MD-MACF1Friction ft cementing postplatform switching, SP
6
Dimensions: height - 11mmDiameter - 4.80mm
Material: Titanium
MD-WMAC1Wide cementing post, SP
7
Dimensions: height - 11mmDiameter - 5.50mm
Material: Titanium
MD-IC040Burn out plastic cap
8
Dimensions: length - 10mmMaterial: Burn out Plastic
MD-ICH40Burn out anti rotationplastic cap
9
Dimensions: length - 10mmMaterial: Burn out Plastic
}C=4mm,H=1,2,3,4mm
MD-CPK41*MD-CPK42*MD-CPK43*MD-CPK44*
C=6mm,H=1,2,3,4mm
MD-CPK61*MD-CPK62*MD-CPK63*MD-CPK64*
C=8mm,H=1,2,3,4mm
MD-CPK81*MD-CPK82*MD-CPK83*MD-CPK84*
10 Anatomic transgingival abutment, SPMD-CPK CH
STANDARD
* All CPK abutments are provided with burn out anti rotation plastic cap MN-ICH40
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 86/152
Standard Platform Direct System -Cemented reconstruction
1 MD-A1510
1.5:1
2 MD-A2510
1.5:1
3 MD-AN151
1.5:1
4 MD-AN251
1.5:1
5 MD-P1530
1.5:1
6 MD-P2530
1.5:1
7 MD-G0220
1.5:1
8 MD-S0200
1.5:1
9 MD-S0220
1.5:1
10 MD-S0222
1.5:1
11 MD-S0224
1.5:1
MD-A1510Esthetic 15 angulatedabutment internal hex. 1mm
1
Dimensions: height - 9mmMaterial: Titanium
MD-A2510Esthetic 25 angulatedabutment internal hex. 1mm
2
Dimensions: height - 9mmMaterial: Titanium
MD-AN15115 degree angulatedabutment internal hex.
3
Dimensions: height - 9mmMaterial: Titanium
MD-AN25125 degree angulatedabutment internal hex.
4
Dimensions: height - 8.5mmMaterial: Titanium
MD-P1530Esthetic 15 angulatedabutment internal hex. 3mm
5
Dimensions: height - 11mmMaterial: Titanium
MD-P2530Esthetic 25 angulatedabutment internal hex. 3mm
6
Dimensions: height - 11mmMaterial: Titanium
MD-G0220Direct gold prosthetic screwinternal hex.
7
Dimensions: length - 7.70mm20 Ncm
Material: Gold-s
MD-S0200Mini prosthetic screwinternal hex.
8
Dimensions: length - 6.90mm30 Ncm
Material: Titanium
MD-S0220Direct prosthetic screwinternal hex.
9
Dimensions: length - 7.60mm30 Ncm
Material: Titanium
MD-S0222Medium prosthetic screwinternal hex.
10
Dimensions: length - 12mm30 Ncm
Material: Titanium
MD-S0224Long prosthetic screwinternal hex.
11
Dimensions: length - 14mm30 Ncm
Material: Titanium
STANDARD
* The” functional height “ of all abutments ismeasured from the platform connection anddoesnot include the internal hex connection
84.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 87/152
Esthetic abutments 0º
8mm
3mm
7mm
MD-P0030
Ø5.60mmØ5.60mm
8mm
1mm
7mm
Ø3.40mm
Ø3.40mm
MD-A0010
Esthetic angulated abutments 15º
MD-A1510
7mm
1mm
8mm
Ø5.20mm
8mm
3mm
7mm
MD-P1530
Ø5.20mm
3.50
2.40
Esthetic angulated abutments 25º
8mm
1mm
7mm
MD-A2510
Ø5.60mm
8mm7mm
MD-P2530
3mm
Ø5.60mm
3.50
2.40
Standard abutments
MD-CTP10
8.5mm
Ø3.75mm
MD-MAC10
11mm
Ø4.75mm
MD-WMAC1
11mm
Ø5.50mm
MD-MACF1
11mm
Ø4.75mm
MD-AN151
1.5mm
7.5mm
Ø5.20mm
6.6mm
Ø5.60mm
MD-AN251
1.6mm
6.9mm6.1mm
Ø2.80mm
Ø3.30mm
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 88/152
STANDARD
Multi-Unit System
1 MM-IT450
1.5:1
2 MM-IO450
1.5:1
3 MA-RSM10
1.5:1
4 MM-CP045
1.5:1
5 MT-MUK02
1:1
6 MM-T0450
1.5:1
7 MM-MG450
1:1
MM-IT450Multi-Unit impression copingfor closed tray
1
Dimensions: length - 8mmMaterial: Stainless steel
MM-IO450Multi-Unit impression copingfor open tray
2
Dimensions: length - 10mmMaterial: Stainless steel
MA-RSM10Multi-Unit abutment analog
3
Dimensions: length - 12mmMaterial: Stainless steel
MM-CP045Multi-Unit plastic cylinder
4
Dimensions: length - 10mmMaterial: Burn out plastic
MT-MUK02Multi-Unit key
5
Dimensions: length - 22mmMaterial: Stainless steel
MM-T0450Multi-Unit Titaniumtemporary cylinder
6
Dimensions: length - 10mmMaterial: Titanium
MM-MG450Multi-Unit direct gold
7
Dimensions: length - 14.5mmMaterial:
MT-MUK02Multi-Unit key
Burn out plastic + gold
86.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 89/152
Multi-Unit System
1 MA-S1375
1.5:1
2 MA-S2375
1.5:1
3 MA-S3375
1.5:1
4 MA-S4375
1.5:1
5 MA-ANH17
1.5:1
6 MA-ANH30
1.5:1
7 MH-00450
8 MM-BGC45
9 MM-S0330
10 MM-G0330
MA-S1375Multi-Unit abutment 1mm
1
Dimensions: height -1mm30-35 Ncm
Material: Titanium
MA-S2375Multi-Unit abutment 2mm
2
Dimensions: height -2mm30-35 Ncm
Material: Titanium
MA-S3375Multi-Unit abutment 3mm
3
Dimensions: height -3mm30-35 Ncm
Material: Titanium
MA-S4375Multi-Unit abutment 4mm
4
Dimensions: height -4mm30-35 Ncm
Material: Titanium
MA-ANH17Multi-Unit 17deg. angulatedabutment with hex.
5
Material: Titanium
MA-ANH30Multi-Unit 30deg. angulatedabutment with hex.
6
Material: Titanium
MH-00450Multi-Unit healing cap
7
Dimensions: length - 3.3mmMaterial: Titanium
MM-BGC45Multi-Unit bar gold coping
8
Dimensions: length - 3.3 mmMaterial: Gold-e
MM-S0330Multi-Unit directprosthetic screw
9
Dimensions: length - 3.8mm25 Ncm
Material: Titanium
MM-G0330Multi-Unit directprosthetic gold screw
10
Dimensions: length - 3.8mm20 Ncm
Material: Gold
STANDARD
MA-ANH30Multi-unit 30deg. angulatedabutment with hex.
1.5:1
1.5:1
1.5:1
1.5:1
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 90/152
88.
A B C
The maximum 30°insertion path.
^
^
30°
The 17° Multi unit abutment allowsa maximum 64° insertion path.
^
^
64°
^
^
90°
The 30° Multi unit abutment allowsa maximum 90° insertion path.
2.6mm
15°
1.3mm
1.2mm
17°
MA-ANH17
3.2mm
1.2mm 15°
30°
1mm
MA-ANH30
Extensive insertion path
Operating Procedure
Place Multi-Unit angulated abutment (17°/30°) onthe implant with the assistance of the grippingbar. To screw the abutment to the implant,
position the Multi-Unit key (MT-MUK02) throughthe gripping bar’s opening. Recommendedtightening moment 30 Ncm.
Multi-Unit Angulated
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 91/152
Ball Attachment - System
1 MB-N1375
1.5:1
2 MB-N2375
1.5:1
3 MB-N3375
1.5:1
4 MB-N4375
1.5:1
5 MB-N5375
1.5:1
6 MB-AN152
1.5:1
7 MB-AN252
1.5:1
8 MT-BK235
1:1
9 MB-RS375
1:1
10 MB-SF200
11 MB-GPS10
MB-N1375Ball attachment anchorinternal hex. 1mm
1
Dimensions: height - 1mmMaterial: Titanium
MB-N2375Ball attachment anchorinternal hex. 2mm
2
Dimensions: height - 2mmMaterial: Titanium
MB-N3375Ball attachment anchorinternal hex. 3mm
3
Dimensions: height - 3mmMaterial: Titanium
MB-N4375Ball attachment anchorinternal hex. 4mm
4
Dimensions: height - 4mmMaterial: Titanium
MB-N5375Ball attachment anchorinternal hex. 5mm
5
Dimensions: height - 5mmMaterial: Titanium
MB-AN152Ball anchor 15deg.angulated abutment
6
Material: Titanium
MB-AN252Ball anchor 25deg.angulated abutment
7
Material: Titanium
MT-BK235Ball attachment anchor key
8
Dimensions: length - 22mmMaterial: Stainless steel
MB-RS375Ball attachment analoginternal hex.
9
Dimensions: length - 15.1mmMaterial: Stainless steel
MB-SF200Plastic ball cap
10
Dimensions: length - 3.5mmMaterial: Plastic
MB-GPS10Gold ball cap
11
Dimensions: length - 2.4mmMaterial: Gold-e
STANDARD
MB-SF200Plastic ball cap
2:1
2:1
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 92/152
Ball Attachment System
1 MB-PPR10
2 MB-DB235
1:1
3 MB-PPC10
4 MB-TTP10
5 MB-PR010
6 MT-TSD10
1:2.5
7 MB-TBS10
8 MB-TBS20
MB-PPR10Soft plastic cap formetal housing
1
Dimensions: length - 2.6mmMaterial: Plastic
MB-DB235Plastic disc forball attachment
2
Dimensions: Diameter - 15mmMaterial: Plastic
MB-PPC10Standard plastic cap formetal housing
3
Dimensions: length - 2.6mmMaterial: Plastic
MB-TTP10Titanium ball cap
4
Dimensions: length - 3.1mmMaterial: Titanium
MB-PR010Plastic mounting sleeve
5
Dimensions: length - 2mmMaterial: Plastic
MT-TSD10Screw driver fortitanium ball cap
6
Dimensions: length - 60mmMaterial: Stainless steel
MB-TBS10Titanium ball capspring standard
7
Dimensions: Diameter - 2.50mmMaterial: Steel
MB-TBS20Titanium ball capspring soft
8
Dimensions: Diameter - 2.60mmMaterial: Steel
STANDARD
MB-DB235Plastic disc for ballattachment
1.5:1
1.5:1
2:1
2:1
2:1
3:1
MB-DMH10Double metal housing
1
9 MB-DMH10
1:1
1 MB-PPR10
2 MB-DB235
1:1
3 MB-PPC10
4 MB-TTP10
5 MB-PR010
2:1
2:1
2:1
1.5:1
90.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 93/152
A B C
MB-AN152
Extensive insertion path
Operating Procedure
3mm
1.7mm
Ø 4 .6
Ball Ø2.25
15°
1.7mm
Ø 4 . 6
3.5mm25°
Ball Ø2.25
Place the Ball anchor angulated abutment (15°/25°) onthe implant by the gripping bar. To screw the abutment tothe implant, posi tion the Hand Hex. Driver (MT-HHR13)through the gripping bar’s opening. Recommended
tightening moment 30 Ncm.
MB-AN252
^
^
30°
15° ^
^ ^
^15°
The Ball anchor 15° angulatedabutment allows a maximum30° insertion path.
^
^
50°
25° 25° ^
^ ^
^
The Ball anchor 25° angulatedabutment allows a maximum 50°insertion path.
Ball Attachment Angulated
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 94/152
Locator Attachment System
1 MB-SZL00
2 MB-SZL01
3 MB-SZL02
4 MB-SZL03
1:1
5 MB-SZL04
1:1
6 MB-SZL05
1:1
7 MB-SZL06
1:1
8 MM-LCT10
9 MM-LMP02
10 MM-LIC10
11 MM-LFA40
1:1.5
MB-SZL000mm Locatorstandard abutment
1
Dimensions: height -0mmMaterial:
MB-SZL011.0mm Locatorstandard abutment
2
Dimensions: height -1mmMaterial:
MB-SZL022.0mm Locatorstandard abutment
3
Dimensions: height -2mmMaterial:
MB-SZL033.0mm Locatorstandard abutment
4
Dimensions: height -3mmMaterial:
MB-SZL044.0mm Locatorstandard abutment
5
Dimensions: height -4mmMaterial:
MB-SZL055.0mm Locatorstandard abutment
6
Dimensions: height -5mmMaterial:
MB-SZL066.0mm Locatorstandard abutment
7
Dimensions: height -6mmMaterial:
MM-LCT10Locator core tool
8
Material: Steel /
MM-LMP02Locator male processingpackage (2 Pack)
9
Dimensions: length - 1.80mmMaterial: Steel/ Nylon
MM-LIC10Locator impression coping(4 Pack)
10
Dimensions: length - 4.50mmDiameter - 4.70mm
Material:
MM-LFA40Locator female analog4mm dia. (4 Pack)
11
Dimensions: length - 10.40mmDiameter - 4mm
Material: Aluminum
STANDARD
Aluminum polyethylene
MB-SZL011.0mm Locatorstandard abutment
Titanium nitrite coating Titanium nitrite coating
Titanium nitrite coatingTitanium nitrite coating
Titanium nitrite coating
Titanium nitrite coating
Titanium nitrite coating
Titanium nitrite coating
1:1.5
1:1.5
1:1
1:1
1:1
Gingival Height
0-6mm
1.5mm
92.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 95/152
Locator Attachment System
2 MM-LRM10
3 MM-LLR10
4 MM-LEL10
5 MM-LER10
6 MM-LELE1
6 MM-LPP10
7 MM-LBP10
8 MM-LSD15
1.5:1
9 MM-LSD21
1.5:1
MM-LFA40Locator female analog 4mmdia. (4 Pack)
1
Dimensions: length - 10.40mmDiameter - 4mm
Material: Aluminum
MM-LPP10Locator parallel post (4 Pack)
6
Dimensions: length - 15mmDiameter - 4.60mm
Material: Polyethylene Black
MM-LBP10Locator black processingreplacement male (4 Pack)
7
Dimensions: length - 1.80mmDiameter - 4.60mm
Material: Polyethylene Black
MM-LSD15Locator torque wrenchdriver short
8
Dimensions: length - 15mmMaterial: stainless steel
MM-LSD21Locator torque wrenchdriver long
9
Dimensions: length - 21mmMaterial: stainless steel
1:1
1:1
1:1
1:1
1:1
1:1
1:1
Locator light retention(4 Pack) 0°-10°*, 3 lbs**, 1.36 kg
Locator extra light retention(4 Pack) 0°-10°*, 1.5 lbs**, 0.68 kg
Locator extended range (4 Pack) 10°-20°*, 3-4 lbs**, 1.36-1.82 kg
Locator extra light extended(4 Pack)10°-20°*, 1.5 lbs**, 0.68 kg
1 MM-LRM10
2 MM-LLR10
3 MM-LEL10
4 MM-LER10
5 MM-LELE1
1:1
1:1
1:1
1:1
1:1
MM-LRM101
Dimensions: length - 1.80mmDiameter - 4.70mm
Material: Nylon
Locator replacement male clear(4 Pack) 0°-10°*, 5 lbs**, 2.27 kg
MM-LLR102
Dimensions: length - 1.80mmDiameter - 4.70mm
Material: Nylon Pink
MM-LEL103
Dimensions: length - 1.80mmDiameter - 4.70mm
Material: Nylon Blue
MM-LER104
Dimensions: length - 1.80mmDiameter - 4.70mm
Material: Nylon Green
MM-LELE15
Dimensions: length - 1.80mmDiameter - 4.70mm
Material: Nylon Red
* For the correction of the Axes divergences for one implant
** Retentions strength
STANDARD
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 96/152
Impression CopingWide Platform
94.94.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 97/152
Analog and Impression Coping -Wide Platform
1 MW-I0470
1.5:1
2 MD-G0213
1.5:1
3 MW-IT100
1.5:1
4 MD-GP100
1.5:1
5 MW-IT300
1.5:1
6 MW-PF550
2:1
7 MW-RSM10
1.5:1
MW-I0470Impression coping for opentray internal hex. WP
1
Dimensions: height - 11mmMaterial: Stainless steel
MD-G0213Direct impression copingguide pin internal hex.
2
Dimensions: length - 21.3mmMaterial: Titanium
MW-IT100Impression coping for closedtray internal hex. WP
3
Dimensions: height - 9mmMaterial: Stainless steel
MD-GP100Direct impression copingguide pin internal hex.
4
Dimensions: length - 16.5mmMaterial: Titanium
MW-IT300Direct impression coping forclosed tray int. hex. WP
5
Dimensions: height - 8mmMaterial: Titanium
MW-PF550Direct press t forclosed tray WP
6
Dimensions: height - 11mmMaterial: Titanium
MW-RSM10Wide dia. implant analoginternal hex.
7
Dimensions: length - 12mmMaterial: Stainless steel
WIDE
MW-I0470Impression coping for
open tray internal hex. WP
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 98/152
MK-WPK61Complete Prosthetic Kit, WP
5
1 MW-CPK61
2 MW-RSM60
3 MW-CHC60
4 MW-IC800
5 MW-IC040
6 MW-ICH40
CPK - CompleteProsthetic Kit
MK-WPK61
MW-CPK61Anatomic 1mm transgingival abutment,crown height 6mm, WP
1
MW-RSM60Wide abutment analog crown height6mm, WP
2
MW-CHC60Wide plastic healing cap h. 6mm, WP
3
MW-IC800Direct Impression coping h. 8mm, WP
4
MW-IC040Burn out plastic cap, WP
5
MW-ICH40Burn out anti rotation plastic cap, WP
6
96.
WIDE
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 99/152
MK-WPK411mm Complete prosthetic kit,
crown height 4mm, WP
1
MK-WPK422mm Complete prosthetic kit,crown height 4mm, WP
6
MK-WPK433mm Complete prosthetic kit,crown height 4mm, WP
6
MK-WPK444mm Complete prosthetic kit,crown height 4mm, WP
6
MK-WPK611mm Complete prosthetic kit,crown height 6mm, WP
6
MK-WPK622mm Complete prosthetic kit,
crown height 6mm, WP
6
MK-WPK633mm Complete prosthetic kit,crown height 6mm, WP
6
MK-WPK644mm Complete prosthetic kit,crown height 6mm, WP
6
MK-WPK811mm Complete prosthetic kit,crown height 8mm, WP
6
MK-WPK822mm Complete prosthetic kit,crown height 8mm, WP
6
MK-WPK833mm Complete prosthetic kit,
crown height 8mm, WP
6
MK-WPK844mm Complete prosthetic kit,crown height 8mm, WP
6
CPK - Complete Prosthetic Kit
WIDE
MK-WPK61Complete Prosthetic Kit, WP
Kit Options
C=4mm,H=1,2,3,4mm
C=Crown Height
H=Gingival Height
C=6mm,H=1,2,3,4mm
C=8mm,H=1,2,3,4mm
}
}
}
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 100/152
Wide Platform - Direct System -Screw retained reconstruction
1 MW-CPH13
1.5:1
2 MW-CP013
1.5:1
3 MW-CPH60
1.5:1
4MW-CP060
1.5:1
5 MW-TPH50
1.5:1
6 MW-GPC10
1.5:1
7 MW-GP010
1.5:1
8 MD-G0220
1.5:1
9 MD-S0200
1.5:1
10 MD-S0220
1.5:1
11 MD-S0222
1.5:1
12 MD-S0224
1.5:1
MW-CPH13Wide dia. plastic cylinderwith hex. internal hex.
1
Dimensions: height - 11mmDiameter - 3.60mm
Material: Burn out plastic
MW-CP013Wide dia. plastic cylinderwithout hex. internal hex.
2
Dimensions: height - 11mmDiameter - 3.60mm
Material: Burn out plastic
MW-CPH60Direct plastic cylinder withhex. Dia.6mm WP
3
Dimensions: height - 11mmDiameter - 6.50mm
Material: Burn out plastic
MW-CP060Direct plastic cylinder withouthex. Dia. 6mm, WP
4
Dimensions: height - 11mmDiameter - 6.50mm
Material: Burn out plastic
MW-TPH50Wide direct temporaryplastic cylinder internal hex.
5
Dimensions: height - 12mmDiameter - 4mm
Material: Plastic
MW-GPC10Wide gold plastic cylinderwith hex. internal hex.
6
Dimensions: height - 15mmDiameter - 4.50mm
Material:
MW-GP010Direct gold abutmentwithout hex. WP
7
Dimensions: height - 15mmDiameter - 4.50mm
Material:
MD-G0220Direct gold prosthetic screwinternal hex.
8
Dimensions: length - 7.7mm20 Ncm
Material: Gold-s
MD-S0200Mini prosthetic screwinternal hex.
9
Dimensions: length - 6.9mm30 Ncm
Material: Titanium
MD-S0220Direct prosthetic screwinternal hex.
10
Dimensions: length - 7.6mm30 Ncm
Material: Titanium
MD-S0222Medium prosthetic screwinternal hex.
11
Dimensions: length - 11.7mm30 Ncm
Material: Titanium
MD-S0224Long prosthetic screwinternal hex.
12
Dimensions: length - 13.8mm30 Ncm
Material: Titanium
WIDE
Burn-out plastic + gold - a
Burn-out plastic + gold - a
* The” functional height “ of all abutments ismeasured from the platform connection anddoesnot include the internal hex connection
98.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 102/152
100.
Esthetic abutments 0º
Esthetic angulated abutments 15º
4.50
2.90
Standard abutments
MW-AN151
Ø4.50mm
Ø4mm
9mm
MW-P0010
Ø6.30mm
Ø4.30mm
1mm
8mm
MW-P1510
Ø4.50mm
1mm
9mm
MW-CTP10
Ø4.50mm
8.5mm
MW-MAC10
Ø4.50mm
Ø5.50mm
10mm
MW-WMAC10
Ø3.80mm
Ø6.50mm
10mm
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 103/152
Multi-Unit System
1 MA-W1500
1.5:1
2 MA-W2500
1.5:1
3 MA-W3500
1.5:1
4 MA-W4500
1.5:1
5 MH-00450
6 MM-BGC45
7 MM-S0330
8 MM-G0330
9 MM-IT450
1.5:1
10 MA-RSM10
1.5:1
11 MM-CP045
1.5:1
12 MM-MG450
1:1
13 MM-T0450
1.5:1
14 MT-MUK02
1:1
15 MM-IO450
1.5:1
MA-W1500Wide platform Multi-Unitabutment 1mm
1
Dimensions: height- 1mm30-35 Ncm
Material: Titanium
MA-W2500Wide platform Multi-Unitabutment 2mm
2
Dimensions: height-2mm30-35 Ncm
Material: Titanium
MA-W3500Wide platform Multi-Unitabutment 3mm
3
Dimensions: height - 3mm30-35 Ncm
Material: Titanium
MA-W4500Wide platform Multi-Unitabutment 4mm
4
Dimensions: height - 4mm30-35 Ncm
Material: Titanium
MH-00450Multi-Unit healing cap
5
Dimensions: height - 3.3mm15 Ncm
Material: Titanium
MM-BGC45Multi-Unit bar gold coping
6
Dimensions: length - 3.3mmMaterial: Gold
MM-S0330Multi-Unit directprosthetic screw
7
Dimensions: length - 3.8mm25 Ncm
Material: Titanium
MM-G0330Multi-Unit directprosthetic gold screw
8
Dimensions: length - 3.8mm20 Ncm
Material: Gold
MM-IT450Multi-Unit impression copingfor closed tray
9
Dimensions: length - 8mmMaterial: Stainless steel
MA-RSM10Multi-Unitabutment analog
10
Dimensions: length - 12mmMaterial: Stainless steel
MM-CP045Multi-Unitplastic cylinder
11
Dimensions: length - 10mmMaterial: Burn out plastic
MM-MG450Multi-Unit direct gold
12
Dimensions: length - 14.5mmMaterial:
MM-T0450Multi-Unittemporary cylinder
13
Dimensions: length - 10mmMaterial: Titanium
MT-MUK02Multi-Unit key
14
Dimensions: length - 14mmMaterial: Stainless steel
MM-IO450Multi-Unit impression copingfor open tray
15
Dimensions: length - 10mmMaterial: Stainless steel
WIDE
Burn out plastic + gold
1.5:1
1.5:1
1.5:1
1.5:1
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 104/152
Ball Attachment System
1 MW-B1500
1.5:1
2 MW-B3500
1.5:1
3 MW-B5500
1.5:1
4 MT-BK235
1:1
5 MB-RS375
1:1
6 MB-SF200
7 MB-GPS10
8 MB-DMH10
1.5:1
MB-PPR10
10 MB-DB235
1:1
11 MB-PPC10
12 MB-TTP10
13 MB-PR010
14 MT-TSD10
1:2.5
15 MB-TBS10
16 MB-TBS20
MW-B1500Wide ball attachment anchorinternal hex. 1mm
1
Dimensions: height- 1mmMaterial: Titanium
MW-B3500Wide ball attachment anchorinternal hex. 3mm
2
Dimensions: height- 3mmMaterial: Titanium
MW-B5500Wide ball attachment anchorinternal hex. 5mm
3
Dimensions: height- 5mmMaterial: Titanium
MT-BK235Ball attachment anchor key
4
Dimensions: length - 22mmMaterial: Stainless steel
MB-RS375Ball attachment analoginternal hex.
5
Dimensions: length - 15.1mmMaterial: Stainless steel
MB-SF200Plastic ball cap
6
Dimensions: length - 3.5mmMaterial: Plastic
MB-GPS10Gold ball cap
7
Dimensions: length - 2.4mmMaterial: Gold-e
MB-DB235Plastic disc for ballattachment
10
Dimensions: Diameter - 15mmMaterial: Plastic
MB-PPC10Standard plastic cap formetal housing
11
Dimensions: length - 2.6mmMaterial: Plastic
MB-TTP10Titanium ball cap
12
Dimensions: length - 3.1mmMaterial: Titanium
MB-PR010Plastic mounting sleeve
13
Dimensions: length - 2mmMaterial: Plastic
MT-TSD10Screw driver fortitanium ball cap
14
Dimensions: length - 60mmMaterial: Plastic
MB-TBS10Titanium ball capspring standard
15
Dimensions: Diameter - 2.5mmMaterial: Steel
MB-TBS20Titanium ball cap spring soft
16
Dimensions: Diameter - 2.6mmMaterial: Steel
WIDE
2:1
2:1
2:1
2:1
3:1
1.5:1
1.5:1
8 MB-PPR10
9 MB-DMH10
1:1
1.5:1
MB-PPR10Soft plastic cap for metalhousing
8
Dimensions: length - 2.6mmMaterial: Plastic
MB-DMH10Double metal housing
9
102.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 106/152
Locator Attachment System
1 MM-LRM10
2 MM-LLR10
3 MM-LEL10
4 MM-LER10
5 MM-LELE1
6 MM-LPP10
7 MM-LBP10
8 MM-LSD15
1.5:1
1
MM-LLR10Locator light retention(4 Pack) 0°-10°*, 3 lbs**, 1.36 kg
2
Dimensions: length - 1.8mmDiameter - 4.70mm
Material: Nylon Pink
MM-LEL10Locator extra light retention(4 Pack) 0°-10°*, 1.5 lbs**, 0.68 kg
3
Dimensions: length - 1.8mmDiameter - 4.70mm
Material: Nylon Blue
MM-LER104
Dimensions: length - 1.8mmDiameter - 4.70mm
Material: Nylon Green
MM-LELE1Locator extra light extended(4 Pack)10°-20°*, 1.5 lbs**, 0.68 kg
5
Dimensions: length - 1.8mmDiameter - 4.70mm
Material: Nylon Red
MM-LPP10Locator parallel post (4 Pack)
6
Dimensions: length - 15mmDiameter - 4.60mm
Material: Polyethylene Black
MM-LBP10Locator black processingreplacement male (4 Pack)
7
Dimensions: length - 1.80mmDiameter - 4.60mm
Material: Polyethylene Black
MM-LSD15Locator torque wrenchdriver short
8
Dimensions: length - 15mmMaterial: stainless steel
MM-LSD21Locator torque wrenchdriver long
9
Dimensions: length - 21mmMaterial: stainless steel
WIDE
Locator extended range (4 Pack )10°-20°*, 3-4 lbs**, 1.36-1.82 kg
MM-LSD21Locator torque wrench
driver long
1:1 1:1
1:1
1:1
1:1
1:1
1:1
MM-LELE1Locator extra light extended(4 Pack)10°-20°*, 1.5 lbs**, 0.68 kg
5
Dimensions: length - 1.8mmDiameter - 4.70mm
Material: Nylon Red
*For the correction of the Axes divergences for one implant
**Retentions strength
9 MM-LSD21
1.5:1
MM-LRM10Locator replacement male clear(4 Pack) 0°-10°*, 5 lbs**, 2.27 kg
1
Dimensions: length - 1.80mmDiameter - 4.70mm
Material: Nylon
104.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 107/152
Bars - Reconstruction System
1 MM-TRU10
1:2
2 MM-GRU10
1:2
3 MM-PBU10
1:3
4 MM-GBU10
1:2
5 MM-TC100
6 MM-PC100
1:3
7 MM-GB100
1:2
MM-TRU10Titanium rider-ovoid
1
Dimensions: length - 50mmheight - 2.9mm
Material: Titanium
MM-GRU10Gold rider-ovoid
2
Dimensions: length - 50mmheight - 2.8mm
Material: Gold-e
MM-PBU10Plastic bar-ovoid
3
Dimensions: length - 80mmheight - 2.3mm
Material: Plastic
MM-GBU10Gold bar-ovoid
4
Dimensions: length - 50mmheight - 2.3mm
Material: Gold-e
MM-TC100Gold rider-round
5
Dimensions: length - 3.5mmheight - 2.5mm
Material: Gold-e
MM-PC100Plastic bar-round
6
Dimensions: length - 85mmDiameter - 2mm
Material: Burn out plastic
MM-GB100Gold bar-round
7
Dimensions: length - 50mmDiameter - 1.90mm
Material: Gold-e
2:1
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 109/152
MIS offers technicians a range of innovative tools
that ease and simplify lab work, and help reach
higher accuracy in every case.
Accessories.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 110/152
Prosthetic Instruments
1 MT-HHR07
1:1
2 MT-HHR13
1:1
3 MT-HDL30
1:1
4 MT-HDS30
1:1
5 MT-BK235
1:1
6 MT-IE172
1:1
7 MT-IE160
1:1
8 MT-AL005
1:3
9 MT-TSD10
1:2
10 MT-IT100
1:1
11 MT-SMK13
1:1.5
12 MT-LMK13
1:1.5
MT-HHR07Short screwdriverfor 0.05" hex.
1
Dimensions: length - 22mmMaterial: Stainless steel
MT-HHR13Long hand screwdriverfor 0.05" hex.
2
Dimensions: length - 29mmMaterial: Stainless steel
MT-HDL30Long hex. drive 0.05"
3
Dimensions: length - 22mmMaterial: Stainless steel
MT-HDS30Short hex. drive 0.05"
4
Dimensions: length - 16mmMaterial: Stainless steel
MT-BK235Ball attachment anchor key
5
Dimensions: length - 22mmMaterial: Stainless steel
MT-IE172Int. connectionabutment extractor
6
Dimensions: length - 27mmMaterial: Titanium
MT-IE160Int. connection abutmentextractor, NP
7
Dimensions: length - 27mmMaterial: Titanium
MT-AL005Allen key 0.05"
8
Dimensions: length - 72mmMaterial: Stainless steel
MT-TSD10Screw driver fortitanium ball cap
9
Dimensions: length - 50mmMaterial: Stainless steel
MT-IT100Closed tray impressioncoping key
10
Dimensions: length - 16.5mmMaterial: Stainless steel
MT-SMK13Short motor keyadapter 0.05"
11
Dimensions: length - 22mmMaterial: Stainless steel
MT-LMK13Long motor keyadapter 0.05"
12
Dimensions: length - 30mmMaterial: Stainless steel
108.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 111/152
Prosthetic Instruments
1 MT-MSD20
1:4
2 MT-US002
1:1
3 MT-UW002
1:1
4 MT-HTS10
1:4
5 MT-GDM01
1:3
MT-MSD20Surgical adapter driver
1
Dimensions: length - 120mmMaterial:
MT-US002Int. hex. implant analog foruniversal hand driver
2
Dimensions: length - 24mmDiameter - 4mm
Material: Stainless steel
MT-UW002Wide int. hex. Implant analogfor universal hand driver
3
Dimensions: length - 24mmDiameter - 5mm
Material: Stainless steel
MT-HTS10Technical hex. screw driver
4
Dimensions: length - 142.5mmMaterial:
MT-GDM01Gingival depth measuring2/4/6/8 mm
5
Dimensions: length - 100mmMaterial: Stainless steel
Stainless steel+Aluminum Stainless steel+Plastic
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 112/152
The MIS Prosthetic Planning Kit consists of replicas of the entire MIS superstructurerange. The kit allows the doctor or the technician to test the superstructures in orderto select the ideal size, diameter and shape of the superstructure on a case-by-case basis. The superstructure replicas are designed for quick, efcient and easyhandling. They are made of titanium with color coding. Red signies a standardplatform, green signies a wide platform, in accordance with MIS color coding.These replicas can be easily placed in either the analogs in the plaster modelor the implant in the patient’s mouth, using a special snap-on screw technique.
MK-0040Prosthetic Planning Kit
Prosthetic planning kit
MK-0040
110.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 113/152
Pcs: Pcs: Pcs:Pcs:
Kit Contents
MD-A0010-8Colored Esthetic abutment
internal hex. 1mm
1
MD-A1510-11Colored Esthetic 15 angulated
abutment internal hex. 1mm
1
MD-A2510-12Colored Esthetic 25 angulated
abutment internal hex. 1mm
1
MD-AN151-9Colored 15 Anatomic
angulated abutment
1
MD-AN251-10Colored 25 Anatomic
angulated abutment
1
MD-CPK81-1
Colored Anatomic 1mmtransgingival abutment,
h. 8mm SP
1
MD-CPK82-2Colored Anatomic 2mm
transgingival abutment,
h. 8mm SP
1
MD-CPK83-3Colored Anatomic 3mm
transgingival abutment,
h. 8mm SP
1
MD-CPK84-4Colored Anatomic 4mm
transgingival abutment,
h. 8mm SP
1
MD-CTP10-5Colored Narrow
cementing post
1
MD-MAC10-6Colored Standard
cementing post
1
MD-P0030-7Colored Esthetic abutment
internal hex. 3mm
1
MD-P1530-13Colored Esthetic 15 angulated
abutment internal hex. 3mm
1
MD-P2530-14Colored Esthetic 25 angulated
abutment internal hex. 3mm
1
MW-AN151-21Colored Wide 15 anatomic
angulated abutment
1
MW-CPK81-15Colored Anatomic 1mm
transgingival abutment,
h. 8mm WP
1
MW-CPK82-16Colored Anatomic 2mm
transgingival abutment,
h. 8mm WP
1
MW-CPK83-17Colored Anatomic 3mm
transgingival abutment,
h. 8mm WP
1
MW-CPK84-18Colored Anatomic 4mm
transgingival abutment, h. 8mm WP
1
MW-CTP10-19Colored Direct conical
titanium post for WP
1
MW-MAC10-20Colored cementing post WP
1
MW-P1510-22Colored Wide esthetic 15
angulated abutment int. hex.1
1
MD-GT190Guide pin for technician set
6
MK-0040Prosthetic Planning Kit
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 114/152
Packaging.MIS - MCU Control Unit
MWH-M0131 (230V)MWH-M0132 (115V)
The surgical micromotor has advanced functionsfor implantology, such as: programs, working stepsand low speed with high torque.
Exclusive design, highly practical andeasily portable.
112.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 115/152
Accessories
MWH-M7559
Surgical contra-angle 20:1
MWH-CAL59
Surgical contra-angle
LED 20:1
MWH-1STUB
One way sterile tubes
MWH-2STUB
Two way sterile tubes
The Motor already offers familiar features: for example the
Torque limitation for dental implantations (5-50 Ncm).
Wide speed range of 300-40,000 rpm.
Maintenance-free motor.
Integrated coolant pump.
And of course with the MCU you have a product
Not only meets but exceeds all quality requirements.
* Irrigation tubing is single use only and must be replaced after each use.
. Control Unit (Console)
. Foot Pedal Control
. Irrigation Support Rod
. Rubber Motor Support
. 3 Sterile Irrigation Tubes
. Power Cord (cord length 2m)
. MCU-MIS Control Unit User Manual
. Micromotor and cord kit
The MIS MCU core kit comes with:
Peformance is in line with all the most modernclinical developments in the dentistry eld.
Outstanding simplicity. All functions havea single key operation and are shown on aclearly visible display panel.
Touch button surgical micromotor with aphysiodispenser, electronic speed andtorque control.
Complies with the most stringent safety requirementsfor medical equipment. The MIS-MCU is approved
by the CE, FDA and manufactured under ISO9001:2000 regulations.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 116/152
Crown SetMK-0022
With the Crown Set, you’ll immediately notice the ease of seating. The cementextrudes easily around the crown margins and within 90 seconds reaches therst stage of cure. With a coherent rubbery consistency during the rst curestage, removal of the material from the interproximal areas, sulcular tissues andundercuts, is quick and easy. As the material continues to cure, it achieves a rigidset that easily retains the crown, yet can be simply removed if required. Crown setadvanced resin chemistry; 2-stage set ting and easy auto mix dispensing systemmake it ideal for cementing implant-retained crowns. The Crown Set can be automixed from a convenient 5 ml hand syringe.
Crown Set
MK-0022
114.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 117/152
This prosthetic holder provides an easy way to shape and grind ceramic andtitanium abutments without damaging surrounding structures.
Abutment Holding System Kit
MK-0001
MK-0001Abutment Holding System Kit
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 118/152
5
116.
Zircon DiamondBurr Set
MK-DB01
The Zircon Diamond Burr Set has beendesigned to enable easy grinding andpreparation of zircon abutments.
MT-A4022Diamond burr 2.20mm
1
MT-B4018Diamond burr 1.80mm
2
MT-C3125Diamond burr 2.50mm
3
MT-F2121Diamond burr 2.10mm
4
MT-K2023Diamond burr 2.30mm
5
1 MT-A4022
2 MT-B4018
3 MT-C3125
4 MT-F2121
5 MT-K2023
MK-DB01Zircon Diamond Burr Set
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 119/152
MK-0038MGUIDE Surgical Kit
The MGUIDE system provides you with state-of-the-art 2-D and 3-Dplanning software for accurate, safe and minimally invasive implantationprocedures using clinically proven MIS implants and tools. Topdown planning and accurate implant placement allow a predictableprosthetic outcome.
MGUIDE Surgical Kit
MK-0038
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 120/152
118.
MK-0038 - Kit Contents
1 MT-TDL20
1:1
2 MT-TDL28
1:1
3 MT-TDL32
1:1
4 MT-TDL38
1:1
5 MT-TDL45
1:1
6 MT-DS200
1:2
7 MT-DS280
1:2
8 MT-DS320
1:2
9 MT-DS380
1:2
10 MT-DS450
1:2
MT-TDL20Long pilot drilldia. 2mm
1
Dimensions: Diameter - 2mmMaterial: Stainless steel
MT-TDL28Long twist drilldia. 2.80mm
2
Dimensions: Diameter - 2.80mmMaterial: Stainless steel
MT-TDL32Long twist drilldia. 3.20mm
3
Dimensions: Diameter - 3.20mmMaterial: Stainless steel
MT-TDL38Long twist drilldia. 3.80mm
4
Dimensions: Diameter - 3.80mmMaterial: Stainless steel
MT-TDL45Long twist drilldia. 4.50mm
5
Dimensions: Diameter - 4.50mmMaterial: Stainless steel
MT-DS200Drilling guidance keydia. 2mm
6
Dimensions: Diameter - 2mmMaterial: Stainless steel
MT-DS280Drilling guidance keydia. 2.80mm
7
Dimensions: Diameter - 2.80mmMaterial: Stainless steel
MT-DS320Drilling guidance keydia. 3.20mm
8
Dimensions: Diameter - 3.20mmMaterial: Stainless steel
MT-DS380Drilling guidance keydia. 3.80mm
9
Dimensions: Diameter - 3.80mmMaterial: Stainless steel
MT-DS450Drilling guidance keydia. 4.50mm
10
Dimensions: Diameter - 4.50mmMaterial: Stainless steel
1:2
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 121/152
1 MT-TP420
1:1
2 MT-LCS37
1:1
3 MT-LCS42
1:1
4 MT-LCS50
1:1
5 MT-MII08
1:1
6 MT-MII10
1:1
7 MT-MII11
1:1
8 MT-MII13
1:1
9 MT-MII16
1:1
MT-TP420Tissue punch dia. 4.20mm
1
Dimensions: Inner - 4.30mmMaterial: Stainless steel
MT-LCS37Long countersink for3.30/3.75 dia. imp.
2
Dimensions: Diameter - 3.75mmMaterial: Stainless steel
MT-LCS42Long countersink for 4.20dia. imp.
3
Dimensions: Diameter - 4.20mmMaterial: Stainless steel
MT-LCS50Long countersink for5 dia. imp.
4
Dimensions: Diameter - 5mmMaterial: Stainless steel
MT-MII08MGUIDE implantinsert length 8mm
5
Dimensions: length - 26.2mmMaterial: Stainless steel
MK-0038 - Kit Contents(Continuation)
MT-MII10MGUIDE implantinsert length 10mm
6
Dimensions: length - 24.2mmMaterial: Stainless steel
MT-MII16MGUIDE implantinsert length 16mm
9
Dimensions: length - 18.2mmMaterial: Stainless steel
MT-MII13MGUIDE implantinsert length 13mm
8
Dimensions: length - 21.2mmMaterial: Stainless steel
MT-MII11MGUIDE implant insertlength 11.5mm
7
Dimensions: length - 22.7mmMaterial: Stainless steel
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 122/152
120.
MK-0038 - Kit Contents(Continuation)
1 MT-MMI08
1:1
2 MT-MMI10
1:1
3 MT-MMI11
1:1
4 MT-MMI13
1:1
5 MT-MMI16
1:1
6 MT-MAS22
1:1
MT-MMI08MGUIDE motor insert forimplant L8mm
1
Dimensions: length - 32mmMaterial: Stainless steel
MT-MMI10MGUIDE motor insert forimplant L10mm
2
Dimensions: length - 30mmMaterial: Stainless steel
MT-MMI11MGUIDE motor insert forimplant L11.50mm
3
Dimensions: length - 28.5mmMaterial: Stainless steel
MT-MMI13MGUIDE motor insert forimplant L13mm
4
Dimensions: length - 27mmMaterial: Stainless steel
MT-MMI16MGUIDE motor insert forimplant L16mm
5
Dimensions: length - 24mmMaterial: Stainless steel
MT-MAS22MGUIDE template anchoringscrew L22mm
6
Dimensions: length - 24mmMaterial: Stainless steel
MT-MAS22MGUIDE template anchoring
screw L22mm
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 123/152
MCENTER Tools
1 MT-LS040
1:1
2 MT-LS070
1:1
3 MT-LS100
1:1
4 MT-PG040
1:1
5 MT-PG070
1:1
6 MT-PG100
1:1
7 MT-TD110
1:1
8 MT-TD630
1:2
9 MT-RODQ1
1:3
MT-LS040Main guide sleeve 4mm(12 Pack)
1
Dimensions: length - 4mmMaterial: Stainless steel
MT-LS070Main guide sleeve 7mm(7 Pack)
2
Dimensions: length - 7mmMaterial: Stainless steel
MT-LS100Main guide sleeve 10mm(5 Pack)
3
Dimensions: length - 10mmMaterial: Stainless steel
MT-PG040Insertion chuck 4mm
4
Dimensions: length - 28mmMaterial: Stainless steel
MT-PG070Insertion chuck 7mm
5
Dimensions: length - 28mmMaterial: Stainless steel
MT-PG100Insertion chuck 10mm
6
Dimensions: length - 28mmMaterial: Stainless steel
MT-TD110Marking drill 1.90mm
7
Dimensions: Diameter - 1.90mmMaterial: Stainless steel
MT-TD630Template drill dia. 6.30mm
8
Dimensions: Diameter - 6.30mmMaterial: Stainless steel
MT-RODQ1Verication Rod
9
Dimensions: length - 100mmMaterial: Stainless steel
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 124/152
MIS offers guided bone and tissue regeneration products.
These products are packaged in varying weights and volumes
allowing the practitioner to choose the precise amount needed
for each specic guided bone and tissue procedures.
Bone Graft Materials& Membranes.
122.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 125/152
4BONE is a fully synthetic bone substitute made of fully synthesized HA & ß-TCP,(60% / 40% ratio) an interconnected micro and 70% macroporosity promotesthe invasion of osteogenic cells by osteoconduction and allows biological uiddiffusion. The 4BONE contains optimized morphology and resorption propertiesthat achieve predictable treatment outcomes. The unique packaging (syringe)has excellent wetting properties, that allows a simple approach to handling theproduct. The 4BONE offers the practitioner exibility in a large range of oralregeneration procedures.
4BONE - Synthetic Bone Substitute
BS-4BS01
BS-4BS014BONE
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 126/152
4BONE is a non structural bioactive bone graft substitute, which is resorbableand able to be rapidly replaced by newly-formed bone. The 4BONE is a ceramicconstituted of two-phase of calcium phosphate 60% hydroxyapatite and 40% betatricalcium phosphate. The hydroxyapatite (HA) - Ca10(PO4)6(OH)2 is chemicallycomparable to biological apatite crystals. Both in vitro and in vivo, chemicallypure hydroxyapatite is considered as the least bioactive of calcium phosphateceramics. Beta tricalcium phosphate (ß-TCP) – Ca3(PO4)2 is recognized to havegreater bioactivity, greater extend of dissolution than HA in vitro and in vivo.
4BONE - Synthetic Bone Substitute1cc/2cc/6cc
BS-4BS10 I BS-4BS20 I BS-4BS60
BS-4BS10
4BONE synthetic bone substitute 1cc
(0.6gr) granules size: 1-2mm
BS-4BS20
4BONE synthetic bone substitute 2cc
(1.2gr) granules size: 1-2mm
BS-4BS60
4BONE synthetic bone substitute 6cc
(3.6gr) granules size: 1-2mm
124.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 127/152
Resorbable collagen membrane 4BONE-RCM is made from highly puriedcollagen bres type I and III derived from skin of porcine origin. 4BONE-RCMmembrane is obtained by collagen cross linking using formaldehyde technology,and neutralized after. 4BONE-RCM membrane is fully resorbable eliminatingthe need for the second surgical procedure often required to remove a nonresorbable membrane. Collagen is currently used for general and dental surgeryas an absorbable haemostatic agent and absorbable wound dressing. A controlprocess of collagen cross-linking provides 4BONE RCM Membrane its ability tofunction as a 4-6 months barrier.
4BONE RCM
BR-C1525 I BR-C2030 I BR-C3040
BR-1525Bone regeneration collagenmembrane 15x25mm
BR-C2030Bone regeneration collagenmembrane 20x30mm
BR-C3040Bone regeneration collagenmembrane 30x40mm
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 128/152
BondBone™ is a novel synthetic bone graft material considered to be a breakthroughin the eld of dental bone grafting. It is composed of biphasic calcium sulfate,which has well-established and documented biocompatible, osteoconductive,and bioresorbable properties. The biphasic calcium sulfate is fast setting, and itsphysical properties are not affected by the presence of blood or saliva.
BondBone™ - Bonding-Graft Material
BS-BB005 I BS-BB010
BS-BB005BondBone 0.5ccBonding Graft Material3 Drivers
BS-BB010BondBone 1.0ccBonding Graft Material3 Drivers
126.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 129/152
Application C, K L, G, K L, G, K L, K
Gold-eMaterial Titanium Alloy Ti 6Al-4V ELI Gold-a Gold-s
Composition
Hardness
Legend: C–to bond K–resin L–soldering G–casting onto
Material Compositions
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 131/152
The index is arranged alphabetically
and in numeric order.
Index.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 132/152
Size Cat. No. Page
INDEX.Alphabetic Order
Abrahami drill guide kit MK-0011 52
Abutment analog crown height 6 mm NP MN-RSM60 68
Abutment holding system kit MK-0001 115
Allen key 0.05" 72mm MT-AL005 108
Allen key 2mm hex. MT-AL002 77
Anatomic 1mm transgingival abutment, h. 6mm, NP 6mm MN-CPK61 68
Anatomic 1mm transgingival abutment, h. 6mm, SP MD-CPK61 74
Anatomic 1mm transgingival abutment, h. 6mm, WP MW-CPK61 96
Ball anchor 15deg. angulated abutment 10mm MB-AN152 89
Ball anchor 25deg. angulated abutment 10mm MB-AN252 89
Ball attachment analog internal hex. 15.1mm MB-RS375 72/89/102
Ball attachment anchor internal hex 4mm MB-N4330 72
Ball attachment anchor internal hex. 3mm MB-N3330 72
Ball attachment anchor internal hex. 2mm MB-N2330 72
Ball attachment anchor internal hex. 1mm 1mm MB-N1375 89
Ball attachment anchor internal hex. 2mm 2mm MB-N2375 89
Ball attachment anchor internal hex. 3mm 3mm MB-N3375 89
Ball attachment anchor internal hex. 4mm 4mm MB-N4375 89Ball attachment anchor internal hex. 5mm 5mm MB-N5375 89
Ball attachment anchor key 22mm MT-BK235 47/89/102/108
BioCom internal hex. implant dia. 4.20 L 6mm 6mm MF4-06420 10/13
BioCom internal hex. implant dia. 5 L 6mm 6mm MF4-06500 14/15
BioCom internal hex. implant dia. 6 L 6mm 6mm MF4-06600 14/16
BioCom internal hex. implant dia.3.75 L 8mm 8mm MF4-08375 10/12
BioCom internal hex. implant dia. 4.20 L 8mm 8mm MF4-08420 10/13
BioCom internal hex. implant dia. 5 L 8mm 8mm MF4-08500 14/15
BioCom internal hex. implant dia. 6 L 8mm 8mm MF4-08600 14/16
BioCom internal hex. implant dia. 3.30 L 10mm 10mm MF4-10330 10/11
BioCom internal hex. implant dia. 3.75 L 10mm 10mm MF4-10375 10/12
BioCom internal hex. implant dia. 4.20 L 10mm 10mm MF4-10420 10/13BioCom internal hex. implant dia. 5 L 10mm 10mm MF4-10500 14/15
BioCom internal hex. implant dia. 6 L 10mm 10mm MF4-10600 14/16
BioCom internal hex. implant dia. 3.30 L 11.50mm 11.50mm MF4-11330 10/11
BioCom internal hex. implant dia. 3.75 L 11.50mm 11.50mm MF4-11375 10/12
BioCom internal hex. implant dia. 4.20 L 11.50mm 11.50mm MF4-11420 10/13
BioCom internal hex. implant dia. 5 L 11.50mm 11.50mm MF4-11500 14/15
BioCom internal hex. implant dia. 6 L 11.50mm 11.50mm MF4-11600 14/16
BioCom internal hex. implant dia. 3.30 L 13mm 13mm MF4-13330 10/11
BioCom internal hex. implant dia. 3.75 L 13mm 13mm MF4-13375 10/12
BioCom internal hex. implant dia. 4.20 L 13mm 13mm MF4-13420 10/13
BioCom internal hex. implant dia. 5 L 13mm 13mm MF4-13500 14/15
BioCom internal hex. implant dia. 6 L 13mm 13mm MF4-13600 14/16
BioCom internal hex. implant dia. 3.30 L 16mm 16mm MF4-16330 10/11
A
B
130.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 133/152
Size Cat. No. Page
BioCom internal hex. implant dia. 3.75 L 16mm 16mm MF4-16375 10/12
BioCom internal hex. implant dia. 4.20 L 16mm 16mm MF4-16420 10/13
BioCom internal hex. implant dia. 5 L 16mm 16mm MF4-16500 14/15
Body try in 2mm 28.50mm MT-BT020 40/45/57/59
Body try in 2.80mm 28.50mm MT-BT028 40/45/59
Body try in 3.20mm 28.50mm MT-BT032 40/45/59
Body try in 3.80mm 28.50mm MT-BT038 40/45/59
Body try in 4.50mm 28.50mm MT-BT045 40/45
Body try in 5mm 28.50mm MT-BT050 40/45
Body try in 5.50mm 28.50mm MT-BT055 40/45
Bone compression kit MK-0020 54
Bone harvest drill dia. 2.80mm 2.80mm MT-BC280 49
Bone harvest drill dia. 3.20mm 3.20mm MT-BC320 49
Bone harvest drill dia. 3.80mm 3.80mm MT-BC380 49
Bone harvest drill dia. 4.50mm 4.50mm MT-BC450 49
Bone harvest kit MK-BH26 49
Burn out plastic cap MM-CPC49 79/81
Burn out plastic cap MD-IC040 74/83
Burn out plastic cap MW-IC040 96/99
Burn out plastic cap, NP 6mm MN-IC040 68/71Burn out anti rotation plastic cap MM-APC49 79/81
Burn out anti rotation plastic cap MD-ICH40 74/83
Burn out anti rotation plastic cap MW-ICH40 96/99
Burn out anti rotation plastic cap, NP 6mm MN-ICH40 68/71
Burn out anti rotation wide plastic cap MW-APC49 79/81
Burn out wide plastic cap MW-CPC49 79/81
Ceramic marking drill 28.50mm MT-CRD21 36
Ceramic pilot drill 33.50mm MT-CRD20 36
Ceramic twist drill 35mm MT-CRD28 36
Closed tray impression coping key 16.5mm MT-IT100 47/108Colored abutment Demo 25 Anatomic angulated abutment MD-AN251-10 111
Colored abutment 15 Anatomic angulated abutment MD-AN151-9 111
Colored Anatomic 1mm transgingival abutment, h. 8mm, SP MD-CPK81-1 111
Colored Anatomic 1mm transgingival abutment, h. 8mm, WP MW-CPK81-15 111
Colored Anatomic 2mm transgingival abutment, h. 8mm, SP MD-CPK82-2 111
Colored Anatomic 2mm transgingival abutment, h. 8mm, WP MW-CPK82-16 111
Colored Anatomic 3mm transgingival abutment, h. 8mm, SP MD-CPK83-3 111
Colored Anatomic 3mm transgingival abutment, h. 8mm, WP MW-CPK83-17 111
Colored Anatomic 4mm transgingival abutment, h. 8mm, SP MD-CPK84-4 111
Colored Anatomic 4mm transgingival abutment, h. 8mm, WP MW-CPK84-18 111
Colored Direct conical titanium post for, WP MW-CTP10-19 111
Colored Esthetic 15 angulated abutment internal hex. 1mm MD-A1510-11 111
Colored Esthetic 15 angulated abutment internal hex. 3mm MD-P1530-13 111
C
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 134/152
Size Cat. No. Page
INDEX.Alphabetic Order
Colored Esthetic 25 angulated abutment internal hex. 1mm MD-A2510-12 111
Colored Esthetic 25 angulated abutment internal hex. 3mm MD-P2530-14 111
Colored Esthetic abutment internal hex. 1mm MD-A0010-8 111
Colored Esthetic abutment internal hex. 3mm MD-P0030-7 111
Colored Narrow cementing post MD-CTP10-5 111
Colored Standard cementing post MD-MAC10-6 111
Colored Wide 15 anatomic angulated abutment MW-AN151-21 111
Colored Wide esthetic 15 angulated abutment int. hex. MW-P1510-22 111
Colored Wide platform cementing post MW-MAC10-20 111
Concave sinus screw 3.50mm MO-SO350 55
Concave sinus screw 3mm MO-SO300 55
Concave sinus screw 4mm MO-SO400 55
Connector pin MD-RAI01 79/81
Convex bajonet osteotome with stopper dia. 2mm MO-CBS20 61
Convex bajonet osteotome with stopper dia. 3.25mm MO-CBS32 61
Convex bajonet osteotome with stopper dia. 3mm MO-CBS30 61
Convex bajonet osteotome with stopper dia. 4mm MO-CBS40 61
Convex compress screw 1.60/2.90mm MO-CO160 55
Convex compress screw 2.40/3.70mm MO-CO240 55
Convex compress screw 2.80/4.30mm MO-CO280 55Convex compress screw 2/3.30mm MO-CO200 55
Convex osteotome with stopper dia. 2mm MO-CS200 61
Convex osteotome with stopper dia. 3.25mm MO-CS325 61
Convex osteotome with stopper dia. 3mm MO-CS300 61
Convex osteotome with stopper dia. 4mm MO-CS400 61
Convex osteotomes set MK-0024 61
Countersink for standard platform 26mm MT-GDN33 35/45/59
Countersink for wide platform 26.80mm MT-GDN50 35/45
Cross driver shaft for contra angle MT-CDS10 27
Cross driver shaft for screwdriver MT-CDS20 27
Crown Set MK-0022 114
Diamond burr 1.80mm MT-B4018 116
Diamond burr 2.10mm MT-F2121 116
Diamond burr 2.20mm MT-A4022 116
Diamond burr 2.30mm MT-K2023 116
Diamond burr 2.50mm MT-C3125 116
Direct conical titanium post for, WP 10.50mm MW-CTP10 99
Direct gold abutment without hex. WP 18.20mm MW-GP010 98
Direct gold plastic cylinder with hex. internal hex. 16.20mm MD-GPC10 82
Direct gold plastic cylinder without hex. internal hex. 18.20mm MD-GP010 82
Direct gold prosthetic screw internal hex. 7.70mm / 20 MD-G0220 82/84/98
Direct impression coping for closed tray MN-IT100 67
Direct impression coping for closed tray int. hex. WP MW-IT300 95
D
132.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 135/152
Size Cat. No. Page
Direct impression coping for closed tray internal hex. 11mm MD-IT100 73
Direct impression coping for closed tray internal hex. MD-IT300 73
Direct impression coping for open tray internal hex. 13mm MD-I0375 73
Direct impression coping for open tray internal hex. NP 13mm MN-I0330 67
Direct impression coping guide pin internal hex. NP MN-GP100 67
Direct impression coping guide pin internal hex. MN-G0160 67
Direct impression coping guide pin internal hex. 16.5mm MD-GP100 73/95
Direct impression coping guide pin internal hex. 21.30mm MD-G0213 73/95
Direct Impression coping h. 8mm, WP 8mm MW-IC800 96
Direct Impression coping h. 8mm, SP MD-IC800 74
Direct Impression coping plastic cap, NP MN-IC600 68
Direct impression coping Set for closed tray MN-IT300 67
Direct plastic cylinder int. Hex. with hex. NP MN-CPH13 70
Direct plastic cylinder int. Hex. without hex. NP MN-CP013 70
Direct plastic cylinder internal hex. with hex. 11mm MD-CPH13 81/82
Direct plastic cylinder internal hex. without hex. 11mm MD-CP013 82
Direct plastic cylinder with hex. dia. 6mm WP 13mm MW-CPH60 98
Direct plastic cylinder without hex. dia. 6mm, WP 13mm MW-CP060 98
Direct press t for closed tray 13mm MD-PF375 73
Direct press t for closed tray, WP 13mm MW-PF550 95Direct prosthetic screw Int. hex. NP 6mm MN-S0160 70/71
Direct prosthetic screw internal hex. 7.60mm / 30 MD-S0220 79/81/82/84/98
Direct temporary cylinder with hex. internal hex. 11mm MD-TCH13 82
Direct temporary plastic cylinder internal hex. 12mm MD-TPH50 82
Double metal housing 2.4mm MB-DMH10 72/90/102
Drill dia. 1.80mm MT-RAD18 77
Drill dia. 2.30mm MT-RAD23 77
Drill extender 28.70mm MT-DE001 39/45/59
Drill stopper kit for dia. 2.80mm 2.80mm MK-ST028 48
Drill stopper kit for dia. 2mm 2mm MK-ST020 48
Drill stopper kit for dia. 3.20mm 3.20mm MK-ST032 48
Drill stopper kit for dia. 3.80mm 3.80mm MK-ST038 48Drill stopper kit for dia. 4.50mm 4.50mm MK-ST045 48
Drilling guidance key dia. 2.80mm MT-DS280 118
Drilling guidance key dia. 2mm MT-DS200 118
Drilling guidance key dia. 3.20mm MT-DS320 118
Drilling guidance key dia. 3.80mm MT-DS380 118
Drilling guidance key dia. 4.50mm MT-DS450 118
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 136/152
Size Cat. No. Page
INDEX.Alphabetic Order
Esthetic 15 angulated abutment internal hex. 1mm 11.10mm MD-A1510 84
Esthetic 15 angulated abutment internal hex. 3mm 13.10mm MD-P1530 84
Esthetic 25 angulated abutment internal hex. 1mm 11.10mm MD-A2510 84
Esthetic 25 angulated abutment internal hex. 3mm 13.10mm MD-P2530 84
Esthetic abutment internal hex. 1mm 11mm MD-A0010 83
Esthetic abutment internal hex. 3mm 13mm MD-P0030 83
Expanding osteotome dia. 3mm MO-SP300 62
Expanding osteotome dia. 4.50mm MO-SP450 62
Expanding osteotome dia. 5.50mm MO-SP550 62
Friction t cementing post platform switching, SP 13mm MD-MACF1 83
Gingival depth measuring 2/4/6/8 mm MT-GDM01 109Gold ball cap 2.4mm MB-GPS10 72/89/102
Gold bar-ovoid 50mm MM-GBU10 105
Gold bar-round 50mm MM-GB100 105
Gold implant connection element MD-RAG01 79
Gold rider-ovoid 50mm MM-GRU10 105
Gold rider-round 2.5mm MM-TC100 105
Guide pin for technician set MD-GT190 111
Hand key for int. hex. connection 18mm MT-HHK24 10/14/17/19/22/39/45
Hand trephine bur incl. key MT-HTR10 37
Hand wrench 10mm MT-HW001 39/45/59Hex. driver shaft for screwdriver body MT-HDS10 27
Hex. ratchet long adapter for int. hex. Connection 22mm MT-MRH20 6/10/14/17/19/22/39/45/57/59
Hex. ratchet long adapter for int. hex. connection, NP MT-NRH20 17/39
Hex. ratchet short adapter for int. hex. connection 16mm MT-MRH10 6/10/14/17/19/22/39/45/59
Implant analog internal hex. NP MN-RSM10 67
Implant analog internal hex. 12mm MD-RSM10 73
Implant Direction Indicator 15mm MT-DI001 40/45/47
Implant site depth probe 8/10/11.5/13/16mm 100mm MT-BTI10 30/41
Implant site osteotome dia. 1.80mm MO-IP180 62
Implant site osteotome dia. 2.80mm MO-IP280 62
Implant site osteotome dia. 3.20mm MO-IP320 62
F
G
H
I
E
134.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 137/152
Size Cat. No. Page
Implant site osteotome dia. 3.80mm MO-IP380 62
Implant site osteotome dia. 4.35mm MO-IP435 62
Impression coping for closed tray internal hex. WP 11mm MW-IT100 95
Impression coping for open tray internal hex. WP 13mm MW-I0470 95
Impression coping plastic cap MM-MTP53 79/81
Insertion chuck 4mm 4mm MT-PG040 121
Int. connection abutment extractor 27mm MT-IE172 47/108
Int. connection abutment extractor, NP MT-IE160 108
Int. hex. implant analog for universal hand driver MT-US002 47/109
Locator black processing replacement male (4 Pack) 1.80mm MM-LBP10 93/104
Locator core tool MM-LCT10 47/92
Locator extended range replacement male green (4 Pack) 1.80mm MM-LER10 93/104
Locator extra light extended range male red (4 Pack) 1.80mm MM-LELE1 93/104
Locator extra light retention repl. male blue (4 Pack) 1.80mm MM-LEL10 93/104
Locator female analog 4mm dia. (4 Pack) 10.40mm MM-LFA40 92/93
Locator female analog 5mm dia. (4 Pack) 10.40mm MM-LFA50 103
Locator impression coping (4 Pack) 4.50mm MM-LIC10 92/103
Locator light retention replacement male pink (4 Pack) 1.80mm MM-LLR10 93/104Locator male processing package (2 Pack) 1.80mm MM-LMP02 92/103
Locator parallel post (4 Pack) 15mm MM-LPP10 93/104
Locator replacement male clear (4 Pack) 1.80mm MM-LRM10 93/104
Locator torque wrench driver long 21mm MM-LSD21 47/93/104
Locator torque wrench driver short 15mm MM-LSD15 47/93/104
Long countersink for 3.30/3.75 dia. imp. MT-LCS37 119
Long countersink for 4.20 dia. imp. MT-LCS42 119
Long countersink for 5 dia. imp. MT-LCS50 119
Long direct hand and ratchet hex. key MT-HMR10 40/45/59
Long hand screwdriver for 0.05" hex. 29mm MT-HHR13 45/47/108
Long hex. drive 0.05" 22mm MT-HDL30 39/47/57/59/108
Long motor adapter for int.hex.connection 25mm MT-MMH2010/14/17/19/22/39/45/57/5
Long motor key adapter 0.05" 30mm MT-LMK13 39/45/47/108
Long motor mount adapter MT-MMA20 55
Long pilot drill dia. 2mm MT-TDL20 118
Long prosthetic screw internal hex. 14mm / 30 MD-S0224 82/84/98
Long ratchet adapter for narrow implant 22mm MT-HRL27 38/57
Long ratchet mount adapter MT-MRL10 55
Long twist drill dia. 2.80mm MT-TDL28 118
Long twist drill dia. 3.20mm MT-TDL32 118
Long twist drill dia. 3.80mm MT-TDL38 118
Long twist drill dia. 4.50mm MT-TDL45 118
L
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 138/152
Size Cat. No. Page
INDEX.Alphabetic Order
Main guide sleeve 4mm (12 Pack) 4mm MT-LS040 121
Mallet solid-plastic insert 28.50mm MT-MAL10 41
Marking drill 1.90mm 34mm MT-TD110 35/45/121
Marking drill 1.90mm external irrigation 34mm MT-TDN19 35/45
Medium prosthetic screw internal hex. 12mm / 30 MD-S0222 82/84/98
MGUIDE implant insert length 10mm 10mm MT-MII10 119
MGUIDE implant inser t length 11.5mm 11.5mm MT-MII11 119
MGUIDE implant insert length 13mm 13mm MT-MII13 119
MGUIDE implant insert length 16mm 16mm MT-MII16 119
MGUIDE implant insert length 8mm 8mm MT-MII08 119
MGUIDE motor insert for implant L10mm 10mm MT-MMI10 120
MGUIDE motor inser t for implant L11.50mm 11.50mm MT-MMI11 120
MGUIDE motor insert for implant L13mm 13mm MT-MMI13 120
MGUIDE motor insert for implant L16mm 16mm MT-MMI16 120
MGUIDE motor insert for implant L8mm 8mm MT-MMI08 120
MGUIDE surgical kit MK-0038 117
MGUIDE template anchoring screw L22mm 22mm MT-MAS22 120
Mini prosthetic screw internal hex. 6.90mm / 30 MD-S0200 82/84/98
MIS Crest widener kit MK-CW28 50
Mountless Basic Surgical Kit MK-0016 59Multi-Unit 17deg. angulated abutment with hex. MA-ANH17 87
Multi-Unit 30deg. angulated abutment with hex. MA-ANH30 87
Multi-Unit abutment 1mm 1mm / 30-35 MA-S1375 87
Multi-Unit abutment 2mm 2mm / 30-35 MA-S2375 87
Multi-Unit abutment 3mm 3mm / 30-35 MA-S3375 87
Multi-Unit abutment 4mm 4mm / 30-35 MA-S4375 87
Multi-Unit abutment analog 12mm MA-RSM10 86/101
Multi-Unit bar gold coping 3.20mm MM-BGC45 87/101
Multi-Unit direct gold 15mm MM-MG450 86/101
Multi-Unit direct prosthetic gold screw 3.70mm /20 MM-G0330 87/101
Multi-Unit direct prosthetic screw 3.70mm /25 MM-S0330 87/101
Multi-Unit healing cap 3mm MH-00450 87/101Multi-Unit impression coping for closed tray 11.70mm MM-IT450 86/101
Multi-Unit key 22mm MT-MUK02 47/86/101
Multi-Unit plastic cylinder 10mm MM-CP045 86/101
Multi-Unit Ti temporary cylinder 10mm MM-T0450 86/101
Narrow ball attachment key 5mm MT-NB225 9/57/66/72
Narrow cementing post 10.50mm MD-CTP10 83
Narrow healing cap 4mm MH-N0442 9/66
Narrow platform cementing post, NP 6mm MN-MAC10 71
Narrow prosthetic kit 1mm , h. 4mm 1mm MK-NPK41 69
Narrow prosthetic kit 1mm , h. 6mm MK-NPK61 68/69
Narrow prosthetic kit 2mm , h. 4mm MK-NPK42 69
M
N
136.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 139/152
Size Cat. No. Page
Narrow prosthetic kit 2mm , h. 6mm MK-NPK62 69
Narrow prosthetic kit 3mm , h. 4mm MK-NPK43 69
Narrow prosthetic kit 3mm , h. 6mm MK-NPK63 69
Narrow prosthetic kit 4mm , h. 4mm MK-NPK44 69
Narrow prosthetic kit 4mm , h. 6mm MK-NPK64 69
Ortho anchor pilot drill 1mm MT-TDO01 27
Ortho anchor screw dia. 1.60 L 6mm 1.6mm MG2-06160 26
Ortho anchor screw dia. 1.60 L 8mm 1.6mm MG2-08160 26
Ortho anchor screw dia. 1.60 L 10mm 1.6mm MG2-10160 26
Ortho anchor screw dia. 1.60 L 12mm 1.6mm MG2-12160 26
Ortho screwdriver MT-OS100 27
Osteotomes kit MK-0002 62
Parallel pin 24mm MT-PP001 39/45/57/59
Pilot drill 2mm 37.30mm MT-TD200 32/45/59
Pilot drill 2mm external irrigation 37.30mm MT-TDN20 34/45/58
Pilot drill 2mm short 26.70mm MT-TDS20 33Plastic ball cap 3.5mm MB-SF200 72/89/102
Plastic bar-ovoid 80mm MM-PBU10 105
Plastic bar-round 85mm MM-PC100 105
Plastic disc for ball attachment MB-DB235 72/90/102
Plastic healing cap MM-CHC55 79/81
Plastic healing cap crown height 6mm MM-CHC60 74
Plastic healing cap crown height 6mm, NP MN-CHC60 68
Plastic mounting sleeve 2mm MB-PR010 72/90/102
Prosthesis connection element, standard MM-RAPE1 79
Prosthetic planning kit MK-0040 110/111
Prosthetic tools kit MK-0039 46
RA technical kit MK-RADT1 76/77
Ratchet wrench 75mm MT-RI030 41/45/55/57/59
Reverse abutment drilling xture MT-RAD10 77
Reverse abutment parallel pin MT-RAPP2 77
Screw driver for titanium ball cap 60mm MT-TSD10 72/90/102/108
Seven internal hex dia. 4.20 L 6mm 6mm MF7-06420 19/21
Seven internal hex dia. 5 L 6mm 6mm MF7-06500 22/23
Seven internal hex. implant dia.6 L 6mm 6mm MF7-06600 22/24
Seven internal hex. implant dia. 3.75 L 8mm 8mm MF7-08375 19/20
Seven internal hex. implant dia. 4.20 L 8mm 8mm MF7-08420 19/21
O
P
R
S
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 140/152
Size Cat. No. Page
INDEX.Alphabetic Order
Seven internal hex. implant dia. 5 L 8mm 8mm MF7-08500 22/23
Seven internal hex. implant dia.6 L 8mm 8mm MF7-08600 22/24
Seven internal hex. implant dia. 3.30 L 10mm, NP 10mm MF7-10330 17/18
Seven internal hex. implant dia. 3.75 L 10mm 10mm MF7-10375 19/20
Seven internal hex. implant dia. 4.20 L 10mm 10mm MF7-10420 19/21
Seven internal hex. implant dia. 5 L 10mm 10mm MF7-10500 22/23
Seven internal hex. implant dia.6 L 10mm 10mm MF7-10600 22/24
Seven internal hex. implant dia. 3.30 L 11.50mm, NP 11.50mm MF7-11330 17/18
Seven internal hex. implant dia. 3.75 L 11.50mm 11.50mm MF7-11375 19/20
Seven internal hex. implant dia. 4.20 L 11.50mm 11.50mm MF7-11420 19/21
Seven internal hex. implant dia. 5 L 11.50mm 11.50mm MF7-11500 22/23
Seven internal hex. implant dia.6 L 11.50mm 11.50mm MF7-11600 22/24
Seven internal hex. implant dia. 3.30 L 13mm, NP 13mm MF7-13330 17/18
Seven internal hex. implant dia. 3.75 L 13mm 13mm MF7-13375 19/20
Seven internal hex. implant dia. 4.20 L 13mm 13mm MF7-13420 19/21
Seven internal hex. implant dia. 5 L 13mm 13mm MF7-13500 22/23
Seven internal hex. implant dia.6 L 13mm 13mm MF7-13600 22/24
Seven internal hex. implant dia. 3.30 L 16mm, NP 16mm MF7-16330 17/18
Seven internal hex. implant dia. 3.75 L 16mm 16mm MF7-16375 19/20
Seven internal hex. implant dia. 4.20 L 16mm 16mm MF7-16420 19/21Seven internal hex. implant dia. 5 L 16mm 16mm MF7-16500 22/23
Short direct hand and ratchet hex. key MT-HMR05 40
Short hex. drive 0.05" 16mm MT-HDS30 39/47/108
Short hex. driver shaft for contra angle MT-SHD10 27
Short motor adapter for int.hex.connection 22.50mm MT-MMH10 10/14/17/19/22/39/45
Short motor key adapter 0.05" 22mm MT-SMK13 39/45/47/108
Short motor mount adapter MT-MMA10 55
Short ratchet adapter for narrow implant 15mm MT-HRS27 38
Short ratchet mount adapter MT-MRS10 55
Short screwdriver for 0.05" hex. 22mm MT-HHR07 45/47/108
Sinus concave bajonet osteotome with stopper dia. 2mm MO-SLA20 63
Sinus concave bajonet osteotome with stopper dia. 3.25mm MO-SLA32 63Sinus concave bajonet osteotome with stopper dia. 3mm MO-SLA30 63
Sinus concave bajonet osteotome with stopper dia. 4mm MO-SLA40 63
Sinus concave osteotome with stopper dia. 2mm MO-SLS20 63
Sinus concave osteotome with stopper dia. 3.25mm MO-SLS32 63
Sinus concave osteotome with stopper dia. 3mm MO-SLS30 63
Sinus concave osteotome with stopper dia. 4mm MO-SLS40 63
Sinus lift osteotomes set MK-0023 63
Soft plastic cap for metal housing 2.60mm MB-PPR10 72/90/102
Spade marking drill 27.50mm MT-SMD10 35/55/57/59
Standard abutment analog MD-RSM48 79/81
Standard abutment analog crown height 6 mm MD-RSM60 74
Standard cementing post 11.50mm MD-MAC10 83
Standard element gold base kit, SP MK-RAGS1 78
138.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 141/152
Size Cat. No. Page
Standard element plastic base kit, SP MK-RAPS1 80
Standard plastic cap for metal housing 2.6mm MB-PPC10 72/90/102
Standard platform Zircon 1mm internal hex. 11mm MD-CR010 83
Surgical adapter driver 120mm MT-MSD20 41/47/109
Technical hex. screw driver 142.5mm MT-HTS10 109
Template drill dia. 6.30mm MT-TD630 121
The Organizer Kit MK-0012 60
Thread form adapter 14mm MT-TFA01 40
Tissue punch 28mm MT-TP500 40
Tissue punch dia. 4.20mm 29.50mm MT-TP420 40/119
Titanium ball cap 3.1mm MB-TTP10 72/90/102
Titanium ball cap spring soft MB-TBS20 72/90/102
Titanium ball cap spring standard MB-TBS10 72/90/102
Titanium rider-ovoid 50mm MM-TRU10 105
Torque wrench 80mm MT-RI040 30/41/47
Trephine bur 4mm 37mm MT-00400 37
Trephine bur 5mm 37mm MT-00500 37
Trephine bur 6mm 37mm MT-00600 37Twist drill 2.40mm 35mm MT-TD240 30/32
Twist drill 2.40mm external irrigation MT-TDN24 34/58
Twist drill 2.80mm 37.50mm MT-TD280 32/45/59
Twist drill 2.80mm external irrigation 37.50mm MT-TDN28 34/45
Twist drill 2.80mm short 28.40mm MT-TDS28 30/33
Twist drill 3.20mm 37.60mm MT-TD320 32/45/59
Twist drill 3.20mm external irrigation 37.60mm MT-TDN32 34/45
Twist drill 3.20mm short 28.50mm MT-TDS32 33
Twist drill 3.50mm 37.70mm MT-TD350 30/32
Twist drill 3.50mm external irrigation 37.70mm MT-TDN35 34
Twist drill 3.80mm 37.80mm MT-TD380 30/32/45/59
Twist drill 3.80mm external irrigation 37.80mm MT-TDN38 34/45Twist drill 3.80mm short 28.7mm MT-TDS38 30/33
Twist drill 3mm 37.60mm MT-TD300 30/32
Twist drill 3mm external irrigation 37.60mm MT-TDN30 34/58
Twist drill 4.50mm 38.20mm MT-TD450 30/32/45
Twist drill 4.50mm external irrigation 38.20mm MT-TDN45 34/45
Twist drill 4.50mm short 28.90mm MT-TDS45 30/33
Twist drill 5.50mm 38.20mm MT-TD550 32/45
Twist drill 5.50mm external irrigation 38.20mm MT-TDN55 34/45
Twist drill 5.50mm short 28.90mm MT-TDS55 33
Twist drill 5mm 38.20mm MT-TD500 32/45
Twist drill 5mm external irrigation 38.20mm MT-TDN50 34/45
Twist drill 5mm short 28.90mm MT-TDS50 33
T
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 142/152
Size
INDEX.Alphabetic Order
Cat. No. Page
UNO ball anchor screw 0.5mm MB-NR005 9/66
UNO ball anchor screw 1.5mm MB-NR015 9/66
UNO ball anchor screw 2.5mm MB-NR025 9/66
UNO implant surgical kit MK-0036 56
UNO Narrow implant dia. 3 L 10mm 10mm MO2-10300 6/9
UNO Narrow implant dia. 3 L 11.50mm 11.50mm MO2-11300 6/9
UNO Narrow implant dia. 3 L 13mm 13mm MO2-13300 6/9
UNO Narrow implant dia. 3 L 16mm 16mm MO2-16300 6/9
UNO One piece dia. 3.50 L 10mm 10mm MO1-10350 6/8
UNO One Piece implant dia. 3 L 11.50mm 11.50mm MO1-11300 6/7
UNO One Piece implant dia. 3.50 L 11.50mm 11.50mm MO1-11350 6/8
UNO One Piece implant dia. 3 L 13mm 13mm MO1-13300 6/7
UNO One Piece implant dia. 3.50 L 13mm 13mm MO1-13350 6/8
UNO One Piece implant dia. 3 L 16mm 16mm MO1-16300 6/7
UNO One Piece implant dia. 3.50 L 16mm 16mm MO1-16350 6/8
UNO One Piece implant insertion tool 20mm MT-HKO21 6/38/57
UNO One Piece implant long key 17mm MT-HKL21 6/38/57
UNO One Piece implant motor adapter, long 30mm MT-UML21 38/58
UNO One Piece implant motor adapter, short 22mm MT-UMS21 38
UNO One Piece implant short key 12mm MT-HKS15 6/38
Verifcation Rod MT-RODQ1 121
Wide abutment analog MW-RSM48 79/81
Wide abutment analog crown height 6 mm MW-RSM60 96Wide ball attachment anchor internal hex. 1mm 1mm MW-B1500 102
Wide ball attachment anchor internal hex. 3mm 3mm MW-B3500 102
Wide ball attachment anchor internal hex. 5mm 5mm MW-B5500 102
Wide cementing post 11.50mm MD-WMAC1 83
Wide cementing post for WP 13mm MW-WMAC1 99
Wide dia. 15 degree angulated abutment internal hex. 11mm MW-AN151 99
Wide dia. implant analog internal hex. 12mm MW-RSM10 95
Wide dia. plastic cylinder with hex. internal hex. 13mm MW-CPH13 98
Wide dia. plastic cylinder without hex. internal hex. 13mm MW-CP013 98
Wide direct temporary plastic cylinder internal hex. 14mm MW-TPH50 98
Wide element gold base kit, SP MK-RAGW1 78
Wide element plastic base kit, SP MK-RAPW1 80
Wide esthetic 15 angulated abutment internal hex. 1mm 11mm MW-P1510 99
U
V
W
140.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 143/152
Size Cat. No. Page
Wide esthetic abutment internal hex. 1mm 11mm MW-P0010 99
Wide gold plastic cylinder with hex. internal hex. 18.20mm MW-GPC10 98
Wide int. hex. Implant analog for universal hand driver MT-UW002 47/109
Wide plastic healing cap MW-CHC55 79/81
Wide plastic healing cap L6mm MW-CHC60 96
Wide platform cementing post 11.50mm MW-MAC10 99
Wide platform Multi-Unit abutment 1mm 1mm / 30-35 MA-W1500 101
Wide platform Multi-Unit abutment 2mm 2mm / 30-35 MA-W2500 101
Wide platform Multi-Unit abutment 3mm 3mm / 30-35 MA-W3500 101
Wide platform Multi-Unit abutment 4mm 4mm / 30-35 MA-W4500 101
Wide prole direct plastic cylinder with hex. 12mm MD-CPH50 82
Wide prole direct plastic cylinder without hex. 11mm MD-CP050 82
Zircon Diamond Burr Set MK-DB01 116
Z
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 144/152
Cat. No. Cat. No. Cat. No.Page Page Page
Numeric OrderINDEX.
BS-4BS01 123
MA-ANH17 87
MA-ANH30 87
MA-RSM10 86/101
MA-S1375 87
MA-S2375 87
MA-S3375 87
MA-S4375 87
MA-W1500 101
MA-W2500 101
MA-W3500 101
MA-W4500 101
MB-AN152 89
MB-AN252 89
MB-DB235 72/90/102
MB-DMH10 72/90/102
MB-GPS10 72/89/102
MB-N1375 89
MB-N2330 72
MB-N2375 89
MB-N3330 72
MB-N3375 89
MB-N4330 72
MB-N4375 89
MB-N5375 89
MB-NR005 9/66
MB-NR015 9/66
MB-NR025 9/66
MB-PPC10 72/90/102
MB-PPR10 72/90/102
MB-PR010 72/90/102
MB-RS375 72/89/102
MB-SF200 72/89/102
MB-SZL00 92
MB-SZL01 64/92
MB-SZL02 92
MB-SZL03 92
MB-SZL04 92
MB-SZL05 92
MB-SZL06 92
MB-TBS10 72/90/102
MB-TBS20 72/90/102
MB-TTP10 72/90/102
MB-WZL00 103
MB-WZL01 103
MB-WZL02 103
MB-WZL03 103
MB-WZL04 103
MB-WZL05 103
MB-WZL06 103
MD-A0010 83
MD-A0010-8 111
MD-A1510 84
MD-A1510-11 111
MD-A2510 84
MD-A2510-12 111
MD-AN151 84
MD-AN151-9 111
MD-AN251 84
MD-AN251-10 111
MD-CP013 82
MD-CP050 82
MD-CPH13 81/82
MD-CPH50 82
MD-CPK61 74
MD-CPK81-1 111
MD-CPK82-2 111
MD-CPK83-3 111
MD-CPK84-4 111
MD-CR010 83
MD-CTP10 83
MD-CTP10-5 111
MD-G0213 73/95
MD-G0220 82/84/98
MD-GP010 82
MD-GP100 73/95
MD-GPC10 82
MD-GT190 111
MD-I0375 73
MD-IC040 74/83
MD-IC800 74
MD-ICH40 74/83
MD-IT100 73
MD-IT300 73
MD-MAC10 83
MD-MAC10-6 111
MD-MACF1 83
MD-P0030 83
MD-P0030-7 111
MD-P1530 84
MD-P1530-13 111
MD-P2530 84
MD-P2530-14 111
MD-PF375 73
MD-RAG01 79
MD-RAI01 79/81
MD-RSM10 73
MD-RSM48 79/81
MD-RSM60 74
MD-S0200 82/84/98
MD-S0220 79/81/82/84/98
MD-S0222 82/84/98
MD-S0224 82/84/98
MD-TCH13 82
MD-TPH50 82
MD-WMAC1 83
MF4-06420 10/13
MF4-06500 14/15
MF4-06600 14/16
MF4-08375 10/12
MF4-08420 10/13
142.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 145/152
Cat. No. Cat. No. Cat. No.Page Page Page
MF4-08500 14/15
MF4-08600 14/16
MF4-10330 10/11
MF4-10375 10/12
MF4-10420 10/13
MF4-10500 14/15
MF4-10600 14/16
MF4-11330 10/11
MF4-11375 10/12
MF4-11420 10/13
MF4-11500 14/15
MF4-11600 14/16
MF4-13330 10/11
MF4-13375 10/12
MF4-13420 10/13
MF4-13500 14/15
MF4-13600 14/16
MF4-16330 10/11
MF4-16375 10/12
MF4-16420 10/13
MF4-16500 14/15
MF7-06420 19/21
MF7-06500 22/23
MF7-06600 22/24
MF7-08375 19/20
MF7-08420 19/21
MF7-08500 22/23
MF7-08600 22/24
MF7-10330 17/18
MF7-10375 19/20
MF7-10420 19/21
MF7-10500 22/23
MF7-10600 22/24
MF7-11330 17/18
MF7-11375 19/20
MF7-11420 19/21
MF7-11500 22/23
MF7-11600 22/24
MF7-13330 17/18
MF7-13375 19/20
MF7-13420 19/21
MF7-13500 22/23
MF7-13600 22/24
MF7-16330 17/18
MF7-16375 19/20
MF7-16420 19/21
MF7-16500 22/23
MG2-06160 26
MG2-08160 26
MG2-10160 26
MG2-12160 26
MH-00450 87/101
MH-N0442 9/66
MK-0001 115
MK-0002 62
MK-0011 52
MK-0012 60
MK-0016 59
MK-0020 54
MK-0022 114
MK-0023 63
MK-0024 61
MK-0036 56
MK-0038 117
MK-0039 46
MK-0040 110/111
MK-BH26 49
MK-CPK41 75
MK-CPK42 75
MK-CPK43 75
MK-CPK44 75
MK-CPK61 74/75
MK-CPK62 75
MK-CPK63 75
MK-CPK64 75
MK-CPK81 75
MK-CPK82 75
MK-CPK83 75
MK-CPK84 75
MK-CW28 50
MK-DB01 116
MK-NPK41 69
MK-NPK42 69
MK-NPK43 69
MK-NPK44 69
MK-NPK61 68/69
MK-NPK62 69
MK-NPK63 69
MK-NPK64 69
MK-RADT1 76/77
MK-RAGS1 78
MK-RAGW1 78
MK-RAPS1 80
MK-RAPW1 80
MK-ST020 48
MK-ST028 48
MK-ST032 48
MK-ST038 48
MK-ST045 48
MK-WPK41 97
MK-WPK42 97
MK-WPK43 97
MK-WPK44 97
MK-WPK61 96/97
MK-WPK62 97
MK-WPK63 97
MK-WPK64 97
MK-WPK81 97
MK-WPK82 97
MK-WPK83 97
MK-WPK84 97
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 146/152
Cat. No. Cat. No. Cat. No.Page Page Page
INDEX.Numeric Order
MM-APC49 79/81
MM-BGC45 87/101
MM-CHC55 79/81
MM-CHC60 74
MM-CP045 86/101
MM-CPC49 79/81
MM-G0330 87/101
MM-GB100 105
MM-GBU10 105
MM-GRU10 105
MM-IT450 86/101
MM-LBP10 93/104
MM-LCT10 47/92
MM-LEL10 93/104
MM-LELE1 93/104
MM-LER10 93/104
MM-LFA40 92/93
MM-LFA50 103
MM-LIC10 92/103
MM-LLR10 93/104
MM-LMP02 92/103
MM-LPP10 93/104
MM-LRM10 93/104
MM-LSD15 47/93/104
MM-LSD21 47/93/104
MM-MG450 86/101
MM-MTP53 79/81
MM-PBU10 105
MM-PC100 105
MM-RAPE1 79
MM-S0330 87/101
MM-T0450 86/101
MM-TC100 105
MM-TRU10 105
MN-AN020 71
MN-CHC60 68
MN-CP013 70
MN-CPH13 70
MN-CPK61 68
MN-G0160 67
MN-GP100 67
MN-I0330 67
MN-IC040 68/71
MN-IC600 68
MN-ICH40 68/71
MN-IT100 67
MN-IT300 67
MN-MAC10 71
MN-RSM10 67
MN-RSM60 68
MN-S0160 70/71
MO1-10350 6/8
MO1-11300 6/7
MO1-11350 6/8
MO1-13300 6/7
MO1-13350 6/8
MO1-16300 6/7
MO1-16350 6/8
MO2-10300 6/9
MO2-11300 6/9
MO2-13300 6/9
MO2-16300 6/9
MO-CBS20 61
MO-CBS30 61
MO-CBS32 61
MO-CBS40 61
MO-CO160 55
MO-CO200 55
MO-CO240 55
MO-CO280 55
MO-CS200 61
MO-CS300 61
MO-CS325 61
MO-CS400 61
MO-IP180 62
MO-IP280 62
MO-IP320 62
MO-IP380 62
MO-IP435 62
MO-SLA20 63
MO-SLA30 63
MO-SLA32 63
MO-SLA40 63
MO-SLS20 63
MO-SLS30 63
MO-SLS32 63
MO-SLS40 63
MO-SO300 55
MO-SO350 55
MO-SO400 55
MO-SP300 62
MO-SP450 62
MO-SP550 62
MT-00400 37
MT-00500 37
MT-00600 37
MT-A4022 116
MT-AL002 77
MT-AL005 108
MT-B4018 116
MT-BC280 49
MT-BC320 49
MT-BC380 49
MT-BC450 49
MT-BK235 47/89/102/108
MT-BT020 40/45/57/59
MT-BT028 40/45/59
MT-BT032 40/45/59
MT-BT038 40/45/59
MT-BT045 40/45
MT-BT050 40/45
144.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 147/152
Cat. No. Page PageCat. No.PageCat. No.
MT-BT055 40/45
MT-BTI10 41
MT-C3125 116
MT-CDS10 27
MT-CDS20 27
MT-CRD20 36
MT-CRD21 36
MT-CRD28 36
MT-DE001 39/45/59
MT-DI001 40/45/47
MT-DS200 118
MT-DS280 118
MT-DS320 118
MT-DS380 118
MT-DS450 118
MT-F2121 116
MT-GDM01 109
MT-GDN33 35/45/59
MT-GDN50 35/45
MT-HDL30 39/47/57/59/108
MT-HDS10 27
MT-HDS30 39/47/108
MT-HHK24 10/14/17/19/22/39/45
MT-HHR07 45/47/108
MT-HHR13 45/47/108
MT-HKL21 6/38/57
MT-HKO21 6/38/57
MT-HKS15 6/38
MT-HMR05 40
MT-HMR10 40/45/59
MT-HRL27 38/57
MT-HRS27 38
MT-HTR10 37
MT-HTS10 106/109
MT-HW001 39/45/59
MT-IE160 108
MT-IE172 47/108
MT-IT100 47/108
MT-K2023 116
MT-LCS37 119
MT-LCS42 119
MT-LCS50 119
MT-LMK13 39/45/47/108
MT-LS040 106/121
MT-MAL10 41
MT-MAS22 120
MT-MII08 119
MT-MII10 119
MT-MII11 119
MT-MII13 119
MT-MII16 119
MT-MMA10 55
MT-MMA20 55
MT-MMH10 17/19/39/45
MT-MMH20 10/14/17/19/22/39/45/57/59
MT-MMI08 120
MT-MMI10 120
MT-MMI11 120
MT-MMI13 120
MT-MMI16 120
MT-MRH10 6/10/14/17/19/22/39/45/59
MT-MRH20 6/10/14/17/19/22/39/45/57/59
MT-MRL10 55
MT-MRS10 55
MT-MSD20 30/41/47/109
MT-MUK02 47/86/101
MT-NB225 9/57/66/72
MT-NRH20 17/39
MT-OS100 27
MT-PG040 121
MT-PP001 39/45/57/59
MT-RAD10 77
MT-RAD18 77
MT-RAD23 77
MT-RAPP2 77
MT-RI030 41/45/55/57/59
MT-RI040 41/47
MT-RODQ1 106/121
MT-SHD10 27
MT-SMD10 35/55/57/59
MT-SMK13 39/45/47/108
MT-TD110 35/45/121
MT-TD200 32/45/59
MT-TD240 32
MT-TD280 32/45/59
MT-TD300 32
MT-TD320 32/45/59
MT-TD350 32
MT-TD380 32/45/59
MT-TD450 32/45
MT-TD500 32/45
MT-TD550 32/45
MT-TD630 121
MT-TDL20 118
MT-TDL28 118
MT-TDL32 118
MT-TDL38 118
MT-TDL45 118
MT-TDN19 35/45
MT-TDN20 34/45/58
MT-TDN24 34/58
MT-TDN28 34/45
MT-TDN30 34/58
MT-TDN32 34/45
MT-TDN35 34
MT-TDN38 34/45
MT-TDN45 34/45
MT-TDN50 34/45
MT-TDN55 34/45
MT-TDO01 27
MT-TDS20 33
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 148/152
Cat. No. Cat. No.Page Page
Numeric OrderINDEX.
MT-TDS28 33
MT-TDS32 33
MT-TDS38 33
MT-TDS45 33
MT-TDS50 33
MT-TDS55 33
MT-TFA01 40
MT-TP420 40/119
MT-TP500 40
MT-TSD10 72/90/102
MT-UML21 38/58
MT-UMS21 38
MT-US002 47/109
MT-UW002 47/109
MW-AN151 99
MW-AN151-21 111
MW-APC49 79/81
MW-B1500 102
MW-B3500 102
MW-B5500 102
MW-CHC55 79/81
MW-CHC60 96
MW-CP013 98
MW-CP060 98
MW-CPC49 79/81
MW-CPH13 98
MW-CPH60 98
MW-CPK61 96
MW-CPK81-15 111
MW-CPK82-16 111
MW-CPK83-17 111
MW-CPK84-18 111
MW-CTP10 99
MW-CTP10-19 111
MW-GP010 98
MW-GPC10 98
MW-I0470 95
MW-IC040 96/99
MW-IC800 96
MW-ICH40 96/99
MW-IT100 95
MW-IT300 95
MW-MAC10 99
MW-MAC10-20 111
MW-P0010 99
MW-P1510 99
MW-P1510-22 111
MW-PF550 95
MW-RSM10 95
MW-RSM48 79/81
MW-RSM60 96
MW-TPH50 98
MW-WMAC1 99
146.
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 149/152
Size Cat. No. Page
MD-P1530MD-P2530
MD-MAC10MD-WMAC1
MD-MACF1MD-A0010MD-P0030
MD-CPK41MD-CPK42MD-CPK43MD-CPK44
MD-CPK61MD-CPK62
MD-CPK63MD-CPK64MD-CPK81MD-CPK82
MD-CPK83MD-CPK84
MD-A1510MD-A2510
MD-CTP10 MD-CR010 MD-AN151MD-AN251
MD-GPC10MD-GP010
Grinding theabutmentshoulder tomeet thegingival contour
Crown axisparallel toimplant axis
Grinding theabutmentto meet thegingival height
Grinding theabutmentshoulder tomeet thegingival contour
Crown axisparallel toimplant axis
Grinding theabutmentto meet thegingival height
Buccal-low level
Palatal-high level
Crown/implantangulation3.5°
Up to 2mmbuccal
Up to 6mmlingual/palatal
Horizontalgingiva level
Crown/implantangulation 4°
According to gingivalheight available inheights of 1,2,3,4mm
Anterior MaxillaAnteriorMandible
Buccal-low level
Palatal-high level
Crown/implantangulation3.5°
Up to 2mmbuccal
Up to 4mmlingual/palatal
Buccal-low level
Lingual-high level
Crown/implantangulationbetween15-25°
Up to 2mmbuccal
Up to 4mmlingual
Canine, Premolars and MolarsPremolarsand Molars
Any gingivalprole
Crown axisparallel toimplant axis
Up to 2mm
Location
Buccal-low level
Palatal-high level
Crown/implantangulationbetween15-25°
Up to 4mmbuccal
Up to 6mmpalatal
Buccal-low level
Palatal-high level
Crown/implantangulationbetween15-25°
Up to 2mmbuccal
Up to 4mmpalatal
Crown/Implant
InclinationRatio
GingivalProle
GingivalHeight
CatalogNumber
Horizontalgingivallevel
Very lowgingivalheight
Crown/implantangulation2.5°
Abutmentdescription
Estheticangulatedabutment
Standard postabutment
Friction t postplatform switching
Estheticabutment
Anatomic transgingivalabutment
Estheticangulatedabutment
Conical postabutment
Zircon - Zro2estheticabutment
Angulatedabutment
Screw-retainedgold-plasticabutment
Restorative Components
Indications for UsingMIS Restorative Components
*for recommendation purpose
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 151/152
All rights reserved. No part of thispubl icat ion may be reproduced,transcribed, stored in an electronic retrievalsystem, translated into any language orcomputer language, or be transmitted inany form whatsoever, without the priorwritten consent of the publisher.
®
8/15/2019 MIS Catalog 2011
http://slidepdf.com/reader/full/mis-catalog-2011 152/152
MIS’s Quality System complies with international quality standards:ISO 13485:2003 - Quality Management System for MedicalDevices, ISO 9001: 2008 – Quality Management System andCE Directive for Medical Devices 93/42/EEC. MIS’s products arecleared for marketing in the USA and CE approved.
MC-CIH06 Rev. 6
®