Wind TTurbines
Industrial brake pads foruse on 750KW-3MWcapacity wind turbines.
DDOONN’’TT CCOOMMPPRROOMMIISSEE OONN QQUUAALLIITTYY!!iinndduussttrriieess
High SSpeed TTrains
Our sintered brake padsare perfoming on TTX(Tilting Train Express), KTXII & G7 high speed trains .
Gantry CCranes
Gantry crane brake padsin sucessful operation worldwide.
Military TTanks
The German Leopard Tank& Korean K1 Military Tankuse our sintered brakepads.
• Deutsche Wind Techink
• Goldwind Wind Farm
• India Renewable Energy
• NPower
• Custom Fluid
• Moventas
• Vestas
• RWE
• ZF
ccuussttoommeerrss qquuaalliittyy
IISSOO 99000011 aannddAASS99110000
The brake pads products arecertified to meet withnational and internationalstandards for manufactur-ing and quality control.Thorough inspection andtesting ensures our qualityis never compromised.
QUALITY FFRICTION MATERIAL
INDUSTRIAL CLUTCH PARTSIndustrial Clutch Parts Ltd is a global specialist supplier of brakes, clutches, couplings and friction material to all types of industry. Our in depth technical knowledge and experienceensures that we are able to offer the best possible solution for each and every application.
IndustrialClutch.com+44 ((0) 11663 7734 6627
• Siemens Wind Power
• Worldwide OEM
• Windex
• Linavard
• SIA Lenkas
• Windtech
• Teico
• WRE Hellas
• Wind Solutions
M522, MM510, MMD 5550 SINTERED METAL MATERIAL DYNAMIC TESTS
MMaannuuffaaccuurriinngg PPrroocceessss MM552222 PPaadd TTyyppee..Dynamic stops 17/07/09
Speed rpm: 1000 to 0 Static Torque Nm: 00
Time Seconds: 9.5 Dynamic Coefficient of Friction: 0.38
Average Dynamic Torque Nm: 2570 Energy per Stop KJ: 1250
Clamping Force Newtons: 10000 Disc Diameter Metre: 0.75
MM551100 PPaadd TTyyppee..Dynamic stops 17/07/09
Speed rpm: 1000 to 0 Static Torque Nm: 00
Time Seconds: 8.1 Dynamic Coefficient of Friction: 0.41
Average Dynamic Torque Nm: 2570 Energy per Stop KJ: 1250
Clamping Force Newtons: 10000 Disc Diameter Metre: 0.75
MMDD555500 PPaadd TTyyppee..Dynamic stops 21/11/08
Speed rpm: 1000 to 0 Static Torque Nm: 00
Time Seconds: 8.5.0 Dynamic Coefficient of Friction: 0.40
Average Dynamic Torque Nm: 2740 Energy per Stop KJ: 1250
Clamping Force Newtons: 10000 Disc Diameter Metre: 0.75
The information supplied is believed to be accurate and reliable, and was obtained by scientificand laboratory testing. However, since actual conditions of use are largely outside the control ofIndustrial Clutch Parts Ltd, it is suggested that this material be thoroughly tested and its suitability for use be determined before final acceptance.
IndustrialClutch.com+44 ((0) 11663 7734 6627
INDUSTRIAL CLUTCH PARTS
INDUSTRIAL CLUTCH PARTSIndustrial Clutch Parts Ltd is a global specialist supplier of brakes, clutches, couplings and friction material to all types of industry. Our in depth technical knowledge and experienceensures that we are able to offer the best possible solution for each and every application.
IndustrialClutch.com+44 ((0) 11663 7734 6627
All friction materials areOEM or After MarketApproved.
Our technical sales personnel have a combined experience of over 150 years inthe friction industry. On site engineers caninspect and advise on the condition,maintenance & application of any hydraulic,pneumatic or electromagnetic brake unit.
Our Caliper Brakes and replacementFriction Pads are suitable for most of thefollowing Wind Turbine manufacturers:
Vestas - DenmarkGE Energy - USASinovel - ChinaEnercon - GermanyGoldwind - ChinaGamesa - SpainDongfang - ChinaSuzlon - IndiaSiemans Wind Power - IndiaREpower - GermanyAlstom Ecotècnia - SpainDeWind - GermanyDoosan - KoreaNEG Micon- now part of Vestas Nordex - GermanyNorwin A/S - DenmarkVensys - Denmark/GermanyWindiva Energy - India
friction bbrake ppads
300 Series Sintered Brake Pad Replaces Svendborg Ref: 940-0402-003 &
940-0402-803ICP Part: CSB300/M522
Brake Type: BSFM 300/BSFH 300
/BSFI 300/BSAK 300
Size: 250L x 125W x 24TH mm
3000 Series Sintered Brake Pad Replaces Svendborg Ref: 490-1563-008
ICP Part: CSB3000/M510
Brake Type: BSFM 3000 /
BSFI 3000 / BSAK 3000
Size: 324L x 200W x 32TH mm
3000 Series Sintered Brake Pad Replaces Svendborg Ref: 490-1563-001
ICP Part: TBC
Brake Type: 1563
Size: 298L x 200W x 32TH mm
75 & 90 Series Organic Brake Pad Replaces Svendborg Ref: 490-2853-001
ICP Part: PA75/90/142
Brake Type: BSAB 75/90
Size: 218L x 108W x 18TH mm
200 Series Organic Brake Pad Replaces Svendborg Ref: 490-1254-001
ICP Part: CSB200/TRW
Brake Type: BSFI 200
Size: 120L x 70W x 15TH mm
300 Series Organic Brake Pad ReplacesSvendborg Ref: 490-2947-001
ICP Part: CSB300/TRW
Brake Type: BSFI 300
Size: 250L x 125W x 24TH mm
300 SeriesOrganic Brake Pad ReplacesSvendborg Ref: 478-1486-802
ICP Part: TBC
Brake Type: BSFG 300
Size: 280L x 125W x 19TH mm
INDUSTRIAL CLUTCH PARTS
INDUSTRIAL CLUTCH PARTSIndustrial Clutch Parts Ltd is a global specialist supplier of brakes, clutches, couplings and friction material to all types of industry. Our in depth technical knowledge and experienceensures that we are able to offer the best possible solution for each and every application.
IndustrialClutch.com+44 ((0) 11663 7734 6627
friction bbrake ppads
75 & 90 Series Organic Brake Pad ReplacesSvendborg Ref: 490-1486-001
ICP Part: TBC
Brake Type: BSAB75
Size: 236L x 110W x 13TH mm
Organic Brake Pad ReplacesSvendborg Ref: 490-1989-002
ICP Part: TBC
Brake Type: 1989
Size: 180L x 67W x 12TH mm
75 & 90 Series ICP Organic Brake Pad ReplacesSvendborg Ref: 590-0339-001
ICP Part: TBC
Brake Type: 75/90
Size: 238L x 116W x 18TH mm
75 & 90 Series Organic Brake Pad ReplacesSvendborg Ref: 590-0750-001
ICP Part: TBC
Brake Type: BSAB 90
Size: 218L x 108W x 18TH mm
300 Series Organic Brake Pad ReplacesSvendborg Ref: 490-2947-001
ICP Part: BSFI300
Brake Type: BSFI300
Size: 251L x 125W x 24TH mm
120 Series Organic Brake Pad ReplacesSvendborg Ref: 590-0191-001
ICP Part: PA120/142
Brake Type: BSAB120
Size: 425L x 138W x 21TH mm
200 SeriesOrganic Brake Pad Replaces Svendborg Brake Pad
ICP Part: CSB200/M522
Brake Type: CSB200
Size: 120L x 70W x 15TH mm
75 & 90 Series ICP Organic Brake Pad ReplacesSvendborg Ref: 490-2138-001
ICP Part: TBC
Brake Type: 75/90
Size: 217L x108W x 18TH mm
75 & 90 Series Organic Brake Pad ReplacesSvendborg Ref: 490-2589-001
ICP Part: TBC
Brake Type: BSAB75-S-30X
Size: 236L x 110W x 18TH mm
ICP Organic Brake Pad ReplacesSvendborg Ref: TBC
ICP Part: CSB500/TRW
Brake Type: BSFH 500
Size: 300L x 220W x 25TH mm
ICP 200 Series Organic Brake Pad Replaces Svendborg Ref: 490-1254-001
ICP Part: CSB200/TRW
Brake Type: BSFI 200
Size: 120L x 70W x 15TH mm
Brembo Sintered Brake Pad ReplacesVestas Ref: 115760
ICP Part: 071790000
Brake Type: 20.3100 / 20.2802
Size: 92L x 117W x 16TH mm
ICPOrganic Brake Pad ReplacesSime Ref: 60111916
ICP Part: FCHR90 / 142
Brake Type: FCHR90A GF B828 ZS4-5
Size: 120L x 290W x 18TH mm
ICPOrganic Brake Pad ReplacesSime Ref: 453611
ICP Part: TBC
Brake Type: Various Sime
Size: 360L x 182W x 10TH mm
INDUSTRIAL CLUTCH PARTS
INDUSTRIAL CLUTCH PARTSIndustrial Clutch Parts Ltd is a global specialist supplier of brakes, clutches, couplings and friction material to all types of industry. Our in depth technical knowledge and experienceensures that we are able to offer the best possible solution for each and every application.
IndustrialClutch.com+44 ((0) 11663 7734 6627
friction bbrake ppads
ICP Organic Brake Pad ReplacesTwiflex GMR Ref: 7080080-Z
ICP Part: GMR/163
Size: 190L x 110W x 19TH mm
ICP Organic Brake Pad ReplacesTwiflex Ref: 0780124-Z
ICP Part: CE150 (STD)
Size: 53L x 47W x 17.5TH mm
ICP Organic Brake Pad ReplacesTwiflex T40 Ref: 7080142-Z
ICP Part: T40/176
Size: 85L x 80W x 21TH mm
ICP Organic Brake Pad ReplacesTwiflex MU Ref: 7080047-Z
ICP Part: MU/176 (STD) & MU/177
(LOCO)
Size: 50L x 30W x 21TH mm
ICP Organic Brake Pad ReplacesTwiflex MX Ref: 7080118-Z
ICP Part: MX/176 Std Co
ICP Part: MX/177 Low Co
Size: 90L x 60W x 12.7TH mm
ICPOrganic Brake Pad ReplacesSime Ref: 453605
ICP Part: SYFT-01A
Brake Type: TH9 2C 3C 1T 2T 3T
Size: 314L x 109W x 10TH mm
ICP Organic Brake Pad ReplacesSime Ref: 453603
ICP Part: SYFT-01A
Brake Type: TH9 2C 3C 1T 2T 3T
Size: 314L x 109W x 14TH mm
ICP Sintered Brake Pad ReplacesAntec Ref: 525.890
OEM Part: 525.890
Material: FTL510
Size: 228L x 129W x 23TH mm
ICP Sintered Brake Pad ReplacesAntec Ref: 521.867
OEM Part: 521.867
Material: FTL510
Size: 229L x 132W x 25TH mm
ICP Organic Brake Pad ReplacesDellner Ref: SKD50
ICP Part: TBC
Brake Type: SKD50
Size: 128L x 69W x 19TH mm
ICP Organic Brake Pad ReplacesTwiflex VKSD Ref: 7080153-Z
ICP Part: TBC
Brake Type: TBC
Size: 215L x 181W x 22TH mm
ICP Organic Brake Pad ReplacesTwiflex VC Ref: 7080011-Z
ICP Part: TBC
Brake Type: TBC
Size: 91L x 80W x 30THmm
510 SeriesSintered Brake Pad ReplacesSime Brake Pad
ICP Part: FTL510
Brake Type: TH9 2C 3C 1T 2T 3T
Size: 314L x 109W x 14TH mm
510 SeriesSintered Brake Pad ReplacesSime Brake Pad
ICP Part: FTL510
Brake Type: Various Sime
Size: 220L x 148W x 15TH mm
ICP Organic Brake Pad ReplacesTwiflex MR/MS Ref: 0780123-Z
ICP Part: MR/138 & MR/177
Size: 62.5L x 47.5W x 11.7THmm
INDUSTRIAL CLUTCH PARTSIndustrial Clutch Parts Ltd is a global specialist supplier of brakes, clutches, couplings and friction material to all types of industry. Our in depth technical knowledge and experienceensures that we are able to offer the best possible solution for each and every application.
IndustrialClutch.com+44 ((0) 11663 7734 6627
INDUSTRIAL CLUTCH PARTSbrembo
Brembo Caliper Disc Brake
ICP Part: 20.3100.31
Brembo Sintered Brake Pad ReplacesVestas Ref: 115760
ICP Part: 071790000
Brake Type: 20.3100 / 20.2802
Size: 117L x 92W x 16TH mm
Brembo Sintered Brake Pad ReplacesVestas Ref: 704059
Supplied with Thermistor
ICP Part: 07179000S
Material: MPM 030 Sintered Iron
Brake Type: 20.3100 / 20.2802
Size: 117L x 92W x 16TH mm
Brembo Pistons
ICP Part: 120517920
BremboMoulded Organic Brake Pad
ICP Part: 107.1710.24
Brake Type: 20.3100 / 20.2802
Size: 117L x 83W x 17TH mm
BremboCaliper Brake Rubber Rings
ICP Part: 120325009
Brembo Caliper BrakeRubber Seal & Screw
ICP Part: 105324611
BremboCaliper Pin Set
ICP Part: 120324810
CSB-200 Disc BrakeSpring EngagedForce up to 12KN
INDUSTRIAL CLUTCH PARTS
INDUSTRIAL CLUTCH PARTSIndustrial Clutch Parts Ltd is a global specialist supplier of brakes, clutches, couplings and friction material to all types of industry. Our in depth technical knowledge and experienceensures that we are able to offer the best possible solution for each and every application.
IndustrialClutch.com+44 ((0) 11663 7734 6627
CSB-300 Disc BrakeSpring AppliedForce up to 65KN
CSB-3000 Disc Brake Spring AppliedForce up to 130KN
CSB-5000 Disc BrakeSpring AppliedForce up to 270KN
The range of ICP industrial high integrity
brakes offers a system meeting the
highest requirements for safety and
reliability for small and large braking
applications and multifunction service
and emergency braking.
Spring Applied Advantages
Complete & comprehensive quality
control to ensure no oil leaks.
High quality sintered metalic linings.
Superior corrosion protection.
Marine protection as standard.
Compact mounting.
Conventional dual cylinder design.
Mono cylinder design option.
Small air gap.
Short response time - fast breaking.
Large brake pad areas.
Easy maintenance - few moving parts.
Mono Spring Brake - easy mounting
(only 2 mounting bolts)
Pad retraction springs.
Drain ports for hydraulic leakage.
Monospring (single caliper) options availablerotor bbraking
•
•
•
•
•
•
•
•
•
•
•
•
•
•
INDUSTRIAL CLUTCH PARTS
INDUSTRIAL CLUTCH PARTSIndustrial Clutch Parts Ltd is a global specialist supplier of brakes, clutches, couplings and friction material to all types of industry. Our in depth technical knowledge and experienceensures that we are able to offer the best possible solution for each and every application.
IndustrialClutch.com+44 ((0) 11663 7734 6627
All hydraulic power units are tested
to field conditions.
All units come completely with
internationally certified brand name
components. All valves, pressure
switches, motors & pumps etc to
ensure a long life and trouble free
system operation.
Bleed and pressure test ports.
Accumulator supplied with failsafe
monitoring sensor (accumulator fault
signal in event of defect).
Status monitoring of brakes applied
(released) takes place by means of a
pressure switch.
All electric motors IEC design.
Note: Special design requirements &
specifications are required for off-
shore hydraulic power units.
hydraulic ppower uunit
•
•
•
•
•
•
•
HPT-WT-15HPT-WT-10HPT-WT-06
PA-090 Disc BrakeHydraulic AppliedForce up to 150KN @ 200bar
INDUSTRIAL CLUTCH PARTS
INDUSTRIAL CLUTCH PARTSIndustrial Clutch Parts Ltd is a global specialist supplier of brakes, clutches, couplings and friction material to all types of industry. Our in depth technical knowledge and experienceensures that we are able to offer the best possible solution for each and every application.
IndustrialClutch.com+44 ((0) 11663 7734 6627
PA-120 Disc Brake Hydraulic AppliedForce up to 500KN @ 150bar
The range of ICP industrial high integrity
brakes offers a system meeting the
highest requirements for safety and
reliability for small and large braking
applications and multifunction service
and emergency braking.
Hydraulic Applied Advantages
Complete & comprehensive quality
control to ensure no oil leaks.
Silent braking operation.
Superior corrosion protection.
Easy maintenance & lining replacement.
Light weight caliper component design
for ease of handling.
Standard bleed and oil leakage
connections.
Compact design.
Small air gap.
Large brake pad area.
Short response time - fast breaking.
Easy maintenance - few moving parts.
yaw bbraking
•
•
•
•
•
•
•
•
•
•
•
INDUSTRIAL CLUTCH PARTS
INDUSTRIAL CLUTCH PARTSIndustrial Clutch Parts Ltd is a global specialist supplier of brakes, clutches, couplings and friction material to all types of industry. Our in depth technical knowledge and experienceensures that we are able to offer the best possible solution for each and every application.
IndustrialClutch.com+44 ((0) 11663 7734 6627
ccaalliippeerr bbrraakkeess
Coremo ID 800 Hydraulic Applied Brake20KN @ 100bar
Coremo ID 2000NSpring Applied Brake116KN @ 100bar release
Coremo ID 3000NSpring Applied Brake, Hydraulic Release280KN @ 100bar release
Coremo ID 900N Spring Applied Brake30KN @ 100bar release
Dellner SKD50 Hydraulic pressure applied, spring released disc brake16.2KN @ 100bar release
ssiieemmeennss yyaaww bbrraakkee
Cotton LiningThe Siemens Yaw Brake Shoe with
double set of fixing holes fits the
400, 450, 500 and 600 Siemens
Wind Turbine. To ensure ease of
fitting, professional drilling jigs
have been created from the
Siemens Shoe.
INDUSTRIAL CLUTCH PARTS
INDUSTRIAL CLUTCH PARTSIndustrial Clutch Parts Ltd is a global specialist supplier of brakes, clutches, couplings and friction material to all types of industry. Our in depth technical knowledge and experienceensures that we are able to offer the best possible solution for each and every application.
IndustrialClutch.com+44 ((0) 11663 7734 6627
small wwind tturbines
Coremo D-N ElectricCaliper Brake5.7kn, 110-220vac operation
ICP ABF 0402.5kn,207vdc operation